Nissan X-Trail 32. Instruction — part 695
RING GEAR SHAFT
DLN-191
< UNIT DISASSEMBLY AND ASSEMBLY >
[TRANSFER: TY30A]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
Check the bearing mounting surface for wear, cracks and damages.
DLN-192
< UNIT DISASSEMBLY AND ASSEMBLY >
[TRANSFER: TY30A]
DRIVE PINION
DRIVE PINION
Exploded View
INFOID:0000000011005110
Adapter case oil seal (outer)
O-ring (outer)
Adapter case oil seal (inner)
Adapter case
O-ring (inner)
Ring gear shaft
Ring gear adjusting shim
(adapter case side)
Ring gear shaft bearing
(adapter case side)
Ring gear
Ring gear nut
Ring gear shaft bearing
(transfer case side)
Ring gear adjusting shim
(transfer case side)
Transfer case
Air breather hose
Air breather tube
Gasket
Filler plug
Drain plug
Plug
Drive pinion
Drive pinion adjusting shim
Drive pinion bearing (front side)
Collapsible spacer
Drive pinion bearing (rear side)
Drive pinion oil seal
Companion flange
Lock nut
Oil seal lip
: N·m (kg-m, ft-lb)
: Always replace after every disassembly.
JSDIA0319GB
DRIVE PINION
DLN-193
< UNIT DISASSEMBLY AND ASSEMBLY >
[TRANSFER: TY30A]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
Disassembly and Assembly
INFOID:0000000011005060
DISASSEMBLY
1.
Remove adapter case. Refer to
DLN-185, "Disassembly and Assembly"
.
2.
Remove ring gear shaft assembly. Refer to
DLN-188, "Disassembly and Assembly"
3.
Remove lock nut from the drive pinion.
4.
Put matching marks (A) on screw ends of companion flange
and drive pinion.
CAUTION:
Use paint to avoid scratching the surface.
5.
Remove companion flange from drive pinion with a puller.
6.
Remove drive pinion oil seal from the transfer case with a puller
(A) (SST: KV381054S0).
CAUTION:
Never damage transfer case.
: Apply transfer oil.
*
: Apply anti-corrosive oil.
: Apply multi-purpose grease.
: Select with proper thickness.
: Apply Genuine Liquid Gasket, Three Bond 1217 or equivalent.
SDIA3084J
SDIA3085J
SDIA3089J
DLN-194
< UNIT DISASSEMBLY AND ASSEMBLY >
[TRANSFER: TY30A]
DRIVE PINION
7.
Remove drive pinion assembly from transfer case while tapping
the drive pinion lightly with a plastic hammer.
CAUTION:
Never drop the drive pinion assembly.
8.
Remove collapsible spacer from the drive pinion.
9.
Remove inner race of drive pinion bearing (rear side) from trans-
fer case.
10. Remove inner race of drive pinion bearing (front side) from drive
pinion with a drift (A) (SST: ST33052000) and replacer (B) (SST:
ST22730000).
11. Remove drive pinion adjusting shim from the drive pinion.
ASSEMBLY
1.
Select drive pinion adjusting shim. Refer to
.
2.
Install selected drive pinion adjusting shim to drive pinion.
3.
Install inner race of drive pinion bearing (front side) to drive pin-
ion with a drift (A) (SST: ST23860000).
CAUTION:
• Never reuse drive pinion bearing (front side).
• Apply gear oil to the drive pinion bearing (front side).
4.
Assemble the inner race of drive pinion bearing (rear side) into
the transfer case.
CAUTION:
• Never reuse drive pinion bearing (rear side).
• Apply gear oil to the drive pinion bearing (rear side).
5.
Install drive pinion oil seal to transfer case with drifts so that it
becomes flush with case end surface.
CAUTION:
• Never reuse oil seal.
• Apply multi-purpose grease onto oil seal lips, and gear oil
onto the circumference.
6.
Assemble a collapsible spacer onto the drive pinion.
CAUTION:
Never reuse the collapsible spacer.
SDIA3086J
SDIA3087J
SDIA3094J
A
: Drift (SST: ST27861000)
B
: Drift (SST: ST30720000)
SDIA3093J
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст