Nissan X-Trail 32. Instruction — part 346
DAS
U0155 METER CAN 1
DAS-125
< DTC/CIRCUIT DIAGNOSIS >
[DRIVER ASSISTANCE SYSTEM]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
U0155 METER CAN 1
DTC Description
INFOID:0000000010765948
DTC DETECTION LOGIC
POSSIBLE CAUSE
Combination meter
FAIL-SAFE
The following systems are canceled.
• LDW
• TSR
DTC CONFIRMATION PROCEDURE
1.
CHECK DTC PRIORITY
If DTC “U0155” is displayed with DTC “U1000”, first diagnose the DTC “U0155”.
Is applicable DTC detected?
YES
>> Perform diagnosis of applicable. Refer to
NO
>> GO TO 2.
2.
PERFORM DTC CONFIRMATION PROCEDURE
1.
Start the engine.
2.
Turn the LDW system ON.
3.
Perform “All DTC Reading” with CONSULT.
4.
Check if the “U0155” is detected as the current malfunction on the self-diagnosis results of “LANE CAM-
ERA”.
Is “U0155” detected as the current malfunction?
YES
>> Refer to
DAS-125, "Diagnosis Procedure"
NO-1
>> To check malfunction symptom before repair: Refer to
GI-44, "Intermittent Incident"
NO-2
>> Confirmation after repair: INSPECTION END
Diagnosis Procedure
INFOID:0000000010765949
1.
CHECK DTC PRIORITY
If DTC “U0155” is displayed with DTC “U1000”, first diagnose the DTC “U0155”.
Is applicable DTC detected?
YES
>> Perform diagnosis of applicable. Refer to
NO
>> GO TO 2.
2.
CHECK COMBINATION METAER SELF DIAGNOSTIC RESULT
Perform “Self Diagnostic Result” of “METER/M&A” using CONSULT.
Are any DTCs detected?
YES
>> Refer to
.
NO
>> Replace front camera unit. Refer to
DAS-149, "Removal and Installation"
.
DTC
Trouble diagnosis name
DTC detecting condition
U0155
METER CAN CIRC 1
(Meter CAN circuit 1)
Front camera unit receives an error signal from combination meter via CAN
communication
DAS-126
< DTC/CIRCUIT DIAGNOSIS >
[DRIVER ASSISTANCE SYSTEM]
U0235 DIST SEN CAN CIRC 1
U0235 DIST SEN CAN CIRC 1
DTC Description
INFOID:0000000010836773
DTC DETECTION LOGIC
POSSIBLE CAUSE
• Distance sensor
• Front camera unit
FAIL-SAFE
The following systems are canceled.
• LDW
• TSR
DTC CONFIRMATION PROCEDURE
1.
CHECK DTC PRIORITY
If DTC “U0235” is displayed with DTC “U1000”, first diagnose the DTC “U0235”.
Is applicable DTC detected?
YES
>> Perform diagnosis of applicable. Refer to
NO
>> GO TO 2.
2.
PERFORM SELF DIAGNOSTIC RESULT
1.
Start the engine.
2.
Perform “Self Diagnostic Result” of “LANE CAMERA” using CONSULT.
Is DTC detected?
YES
>> Refer to
DAS-126, "Diagnosis Procedure"
NO-1
>> To check malfunction symptom before repair: Refer to
GI-44, "Intermittent Incident"
.
NO-2
>> Confirmation after repair: INSPECTION END
Diagnosis Procedure
INFOID:0000000010836774
1.
CHECK DISTANCE SENSOR SELF DIAGNOSTIC RESULT
Perform “Self Diagnostic Result” of “LASER/RADAR” using CONSULT.
Are any DTCs detected?
YES
>> Refer to
NO
>> Replace the front camera unit. Refer to
DAS-149, "Removal and Installation"
.
DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detecting condition
U0235
DIST SEN CAN CIRC 1
(Distance Sensor CAN circuit 1)
If front camera unit detects an error signal that is received from distance sensor
via CAN communication
DAS
U0416 VDC CHECKSUM DIAG
DAS-127
< DTC/CIRCUIT DIAGNOSIS >
[DRIVER ASSISTANCE SYSTEM]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
U0416 VDC CHECKSUM DIAG
DTC Description
INFOID:0000000010836768
DTC DETECTION LOGIC
POSSIBLE CAUSE
• ABS actuator and electric unit (control unit)
• Front camera unit
FAIL-SAFE
The following systems are canceled.
• LDW
• TSR
DTC CONFIRMATION PROCEDURE
1.
PERFORM SELF DIAGNOSTIC RESULT
1.
Turn ignition ON.
2.
Perform “Self Diagnostic Result” of “LANE CAMERA” using CONSULT.
Is DTC detected?
YES
>> Refer to
DAS-127, "Diagnosis Procedure"
NO-1
>> To check malfunction symptom before repair: Refer to
GI-44, "Intermittent Incident"
NO-2
>> Confirmation after repair: INSPECTION END
Diagnosis Procedure
INFOID:0000000010836769
1.
CHECK ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) SELF DIAGNOSTIC RESULT
Perform “Self Diagnostic Result” of “ABS” using CONSULT.
Are any DTCs detected?
YES
>> Refer to
.
NO
>> Replace the front camera unit. Refer to
DAS-149, "Removal and Installation"
.
DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detecting condition
U0416
VDC CAN CIR2(LDP)
[Vehicle dynamic control CAN
circuit1 (Lane departure preven-
tion)]
Front camera unit receives incorrect signal (P-RUN) from ABS actuator and elec-
tric unit (control unit) via CAN communication.
DAS-128
< DTC/CIRCUIT DIAGNOSIS >
[DRIVER ASSISTANCE SYSTEM]
U0428 STRG SEN CAN 2
U0428 STRG SEN CAN 2
DTC Description
INFOID:0000000010765950
DTC DETECTION LOGIC
POSSIBLE CAUSE
Steering angle sensor
FAIL-SAFE
None
DTC CONFIRMATION PROCEDURE
1.
CHECK DTC PRIORITY
If DTC “U0428” is displayed with DTC “U1000”, first diagnose the DTC “U0428”.
Is applicable DTC detected?
YES
>> Perform diagnosis of applicable. Refer to
NO
>> GO TO 2.
2.
PERFORM DTC CONFIRMATION PROCEDURE
1.
Start the engine.
2.
Turn the LDW system ON.
3.
Perform “All DTC Reading” with CONSULT.
4.
Check if the “U0428” is detected as the current malfunction on the self-diagnosis results of “LANE CAM-
ERA”.
Is “U0428” detected as the current malfunction?
YES
>> Refer to
DAS-128, "Diagnosis Procedure"
NO-1
>> To check malfunction symptom before repair: Refer to
GI-44, "Intermittent Incident"
.
NO-2
>> Confirmation after repair: INSPECTION END
Diagnosis Procedure
INFOID:0000000010765951
1.
CHECK DTC PRIORITY
If DTC “U0428” is displayed with DTC “U1000”, first diagnose the DTC “U0428”.
Is applicable DTC detected?
YES
>> Perform diagnosis of applicable. Refer to
NO
>> GO TO 2.
2.
CHECK ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) SELF DIAGNOSTIC RESULT
Perform “Self Diagnostic Result” of “ABS” using CONSULT.
Are any DTCs detected?
YES
>> Refer to
.
NO
>> Replace front camera unit. Refer to
DAS-149, "Removal and Installation"
.
DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detecting condition
U0428
STRG SEN CAN CIR2
(Steerg sensor CAN circuit2)
If front camera unit detects an error signal that is received from steering angle
sensor via CAN communication
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст