Nissan X-Trail 32. Instruction — part 1438
FAN CONTROL AMPLIFIER
HAC-227
< REMOVAL AND INSTALLATION >
[MANUAL AIR CONDITIONING]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
FAN CONTROL AMPLIFIER
Exploded View
INFOID:0000000010939882
Refer to following items..
• R9M (EXCEPT FOR RUSSIA) : Refer to
.
• MR20DD : Refer to
• QR25DE : Refer to
• R9M (FOR RUSSIA) : Refer to
Removal and Installation
INFOID:0000000010939883
REMOVAL
1.
Remove instrument lower panel LH (LHD models) or glove box cover (RHD models). Refer to
IP-41, "Removal and Installation"
(RHD models).
2.
Disconnect power transistor harness connector.
3.
Remove fixing screws
, and then remove fan control amplifier.
INSTALLATION
Install in the reverse order of removal.
JMIIA3400ZZ
HAC-228
< REMOVAL AND INSTALLATION >
[MANUAL AIR CONDITIONING]
DOOR MOTOR
DOOR MOTOR
Exploded View
INFOID:0000000010939884
LEFT SIDE
RIGHT SIDE
A/C unit assembly
Intake door lever
Intake door link
Intake door motor
Air mix door motor LH
JMIIA3368GB
DOOR MOTOR
HAC-229
< REMOVAL AND INSTALLATION >
[MANUAL AIR CONDITIONING]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
AIR MIX DOOR MOTOR
AIR MIX DOOR MOTOR : Removal and Installation
INFOID:0000000010939885
REMOVAL
Air Mix Door Motor LH
1.
Set the temperature at 18
°
C (64
°
F).
CAUTION:
Always perform the above procedure when removing air mix door motor. Otherwise, air mix door
may interfere in A/C unit assembly may be damaged.
2.
Remove instrument lower panel LH (LHD models) or glove box cover (RHD models). Refer to
IP-41, "Removal and Installation"
(RHD models).
3.
Remove foot duct LH. Refer to
VTL-12, "FOOT DUCT : Removal and Installation"
.
4.
Disconnect air mix door motor harness connector.
5.
Remove fixing screws
, and then remove air mix door motor
LH.
A/C unit assembly
Side ventilator door lever
Foot door link
Foot door link
Main link
Mode door link
Mode door motor
JMIIA3531ZZ
JMIIA3395ZZ
HAC-230
< REMOVAL AND INSTALLATION >
[MANUAL AIR CONDITIONING]
DOOR MOTOR
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
After installing door motor, perform door motor starting position. Refer to
INTAKE DOOR MOTOR
INTAKE DOOR MOTOR : Removal and Installation
INFOID:0000000010939886
REMOVAL
1.
Remove instrument lower panel LH (LHD models) or glove box cover (RHD models). Refer to
IP-41, "Removal and Installation"
(RHD models).
2.
Disconnect intake door motor harness connector.
3.
Remove fixing screws
, and then remove intake door motor.
INSTALLATION
Install in the reverse order of removal.
MODE DOOR MOTOR
MODE DOOR MOTOR : Removal and Installation
INFOID:0000000010939887
REMOVAL
1.
Remove instrument lower panel RH (RHD models) or glove box cover (LHD models). Refer to
IP-41, "Removal and Installation"
(RHD models).
2.
Remove foot duct RH. Refer to
VTL-12, "FOOT DUCT : Removal and Installation"
3.
Disconnect mode door motor harness connector.
4.
Remove fixing screws
, mode door motor.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
After installing door motor, perform door motor starting position. Refer to
JMIIA3394ZZ
JMIIA3396ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст