Nissan X-Trail 32. Instruction — part 506
SYSTEM (INTELLIGENT KEY SYSTEM)
DLK-365
< SYSTEM DESCRIPTION >
[TYPE 2]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
SYSTEM DIAGRAM
SIGNAL PATH
• BCM activates inside key antenna and checks that Intelligent Key is in vehicle, when push-button ignition
switch operation is performed while ignition switch position is LOCK.
• When BCM does not detect a registered Intelligent Key in vehicle, meter display signal is transmitted by
BCM to combination meter via CAN communication.
• When combination meter receives meter display signal, key ID warning displays.
• After 5 seconds are passed since the key ID warning is displayed, key ID verification information displays.
WARNING/INDICATOR OPERATIONG CONDITION
When all of the following conditions are satisfied.
• Ignition switch: LOCK position
• Push-button ignition switch operation is performed.
• Registered Intelligent Key is not detected inside the vehicle.
WARNING/INDICATOR CANCEL CONDITION
When any of the following conditions are satisfied.
• After 25 seconds are passed since the key ID verification information is displayed.
• When all door is locked with Intelligent Key or door request switch
• Lock the doors after all doors are closed
• When Intelligent Key backside is contacted to push-button ignition switch while brake pedal is depressed.
INFORMATION DISPLAY (COMBINATION METER) : Key ID Warning
INFOID:0000000010750526
DESIGN/PURPOSE
Information display warns the driver that Intelligent Key is not detected in vehicle.
SYNCHRONIZATION WITH MASTER WARNING LAMP
Synchronization is applied.
Refer to
MWI-47, "WARNING LAMPS/INDICATOR LAMPS : Master Warning Lamp"
JMKIB3598GB
Symbol
Message
Key ID Incorrect
JMKIB1398ZZ
DLK-366
< SYSTEM DESCRIPTION >
[TYPE 2]
SYSTEM (INTELLIGENT KEY SYSTEM)
SYSTEM DIAGRAM
SIGNAL PATH
• BCM activates inside key antenna and checks that Intelligent Key is in vehicle, when push-button ignition
switch operation is performed while ignition switch position is LOCK.
• When BCM does not detect a registered Intelligent Key in vehicle, meter display signal is transmitted by
BCM to combination meter via CAN communication.
• When combination meter receives meter display signal, key ID warning displays.
WARNING/INDICATOR OPERATING CONDITION
When all of the following conditions are satisfied.
• Ignition switch is in LOCK position
• Push-button ignition switch operation is performed.
• A registered Intelligent Key is not detected inside the vehicle.
WARNING/INDICATOR CANCEL CONDITION
When any of the following conditions are satisfied.
• 5 seconds are passed since operation start.
• A registered Intelligent Key is detected in passenger room when push-button ignition switch is operated.
• Intelligent Key backside is contacted to push-button ignition switch while brake pedal is depressed (when
Intelligent Key battery is discharged).
TIMING CHART
INFORMATION DISPLAY (COMBINATION METER) : P Position Warning (Information
Display)
INFOID:0000000010750527
DESIGN/PURPOSE
JMKIB3599GB
JMKIB1420GB
SYSTEM (INTELLIGENT KEY SYSTEM)
DLK-367
< SYSTEM DESCRIPTION >
[TYPE 2]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Information display warns the driver of egression from the vehicle while shift is other than P position.
SYNCHRONIZATION WITH MASTER WARNING LAMP
Synchronization is applied.
Refer to
MWI-47, "WARNING LAMPS/INDICATOR LAMPS : Master Warning Lamp"
SYNCHRONIZATION WITH WARNING CHIME
Synchronization is applied. [P position warning (buzzer)]
Refer to
WCS-15, "WARNING CHIME : P Position Warning (Buzzer)"
SYSTEM DIAGRAM
SIGNAL PATH
• BCM transmits meter display signal to combination meter via CAN communication, when P position warning
(buzzer) is operated.
• When combination meter receives meter display signal, P position warning displays.
WARNING/INDICATOR OPERATING CONDITION
P position warning (buzzer) is operated.
Refer to
WCS-15, "WARNING CHIME : P Position Warning (Buzzer)"
WARNING/INDICATOR CANCEL CONDITION
P position warning (buzzer) is canceled.
Refer to
WCS-15, "WARNING CHIME : P Position Warning (Buzzer)"
TIMING CHART
Symbol
Message
Shift to Park
JMKIB1400ZZ
JMKIB1422GB
JMKIB1423GB
DLK-368
< SYSTEM DESCRIPTION >
[TYPE 2]
SYSTEM (INTELLIGENT KEY SYSTEM)
INFORMATION DISPLAY (COMBINATION METER) : Steering Lock Information
INFOID:0000000010750528
DESIGN/PURPOSE
When unlocking steering the lock, the system informs the driver that it cannot be unlocked unless the steering
wheel is turned.
SYNCHRONIZATION WITH MASTER WARNING LAMP
Synchronization is applied.
Refer to
MWI-47, "WARNING LAMPS/INDICATOR LAMPS : Master Warning Lamp"
SYSTEM DIAGRAM
SIGNAL PATH
• BCM transmits the steering lock unit unlock request signal to the steering lock unit, and simultaneously the
steering lock unit checks that the steering lock can be unlocked.
• If the LOCK status of the steering lock unit is detected by the steering lock unit even after BCM is transmitted
to the steering unlock request signal, the meter display signal is sent to the combination meter via CAN com-
munication.
• When combination meter receives meter display signal, steering lock information displays.
WARNING/INDICATOR OPERATIONG CONDITION
When the steering lock cannot be unlocked.
WARNING/INDICATOR CANCEL CONDITION
When any of the following conditions are satisfied.
• When the steering lock is unlocked. (Press the push-button ignition switch while turning the steering wheel
to the left and right gently.)
• After 15 seconds are passed since the steering lock information is displayed.
Symbol
Message
–
JMKIB1874ZZ
JMKIB3595GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст