Nissan X-Trail 32. Instruction — part 2184
TM-694
< REMOVAL AND INSTALLATION >
[CVT: RE0F10G]
CVT FLUID COOLER SYSTEM
CVT FLUID COOLER SYSTEM
Exploded View
INFOID:0000000010622910
Transaxle side
Vehicle side
JSDIA5222GB
Fluid cooler tube A
Copper washer
Fluid cooler hose A
Hose clamp
Fluid cooler tube B
CVT oil warmer
Transaxle assembly
: Always replace after every disassembly.
: N·m (kg-m, ft-lb)
JSDIA6024GB
CVT FLUID COOLER SYSTEM
TM-695
< REMOVAL AND INSTALLATION >
[CVT: RE0F10G]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
Removal and Installation
INFOID:0000000010622911
REMOVAL
NOTE:
When removing components such as hoses, tubes/lines, etc., cap or plug openings to prevent fluid from spill-
ing.
1.
Remove the front bumper. Refer to
EXT-15, "Removal and Installation"
2.
Remove the engine under cover. Refer to
EXT-40, "ENGINE UNDER COVER : Removal and Installation"
.
3.
Remove the battery tray. Refer to
PG-143, "R9M : Removal and Installation"
.
4.
Remove fluid cooler hose C
and fluid cooler hose E
from
fluid cooler tube assembly.
5.
Remove mounting bolts (
) of fluid cooler tube assembly
.
6.
Remove fluid cooler hose F
and fluid cooler hose B
from
fluid cooler tube assembly.
7.
Remove CVT fluid cooler mounting bolts
and mounting nuts
and take out the CVT fluid cooler.
CAUTION:
Be careful not to damage the radiator fins while taking out
the CVT fluid cooler.
Bracket
Bumper reinforcement
Fluid cooler hose D
Hose clamp
Fluid cooler bracket (with tube)
CVT fluid cooler
Bracket
Fluid cooler hose C
Fluid cooler hose E
Fluid cooler tube assembly
Fluid cooler hose F
Fluid cooler hose B
Fluid cooler tube A
CVT oil warmer
Transaxle assembly
Bumper reinforcement lower
: Always replace after every disassembly.
: N·m (kg-m, in-lb)
: Hose clamp
: Vehicle front
JSDIA5376ZZ
: Hose clamp
JSDIA6084ZZ
: Vehicle front
JSDIA5378ZZ
TM-696
< REMOVAL AND INSTALLATION >
[CVT: RE0F10G]
CVT FLUID COOLER SYSTEM
8.
Remove fluid cooler hose E
, fluid cooler hose D
and fluid
cooler hose C
from CVT fluid cooler
and fluid cooler
bracket (with tube)
.
9.
Remove bolts (
) and separate fluid cooler bracket (with tube)
and bracket
from CVT fluid cooler
.
10. Remove fluid cooler hose F
and fluid cooler hose B
from
CVT oil warmer.
11. Remove fluid cooler tube A and fluid cooler tube B.
INSTALLATION
Note the followings and Installation is in the reverse order of removal.
CAUTION:
• Be careful not to damage CVT fluid cooler.
• Never reuse hose clamps.
Transaxle side
Refer to the followings when installing fluid cooler tubes.
• When installing fluid cooler tube A
and fluid cooler tube B
to
transaxle assembly.
- Contact fluid cooler tube A stopper
to transaxle case boss
.
- Contact fluid cooler tube B stopper
to transaxle case boss
.
• Refer to the followings when installing fluid cooler hose.
: Hose clamp
JSDIA5379ZZ
JSDIA5380ZZ
: Hose clamp
: Vehicle front
JSDIA6083ZZ
JSDIA5425ZZ
CVT FLUID COOLER SYSTEM
TM-697
< REMOVAL AND INSTALLATION >
[CVT: RE0F10G]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
• Refer to the followings when installing hose clamp.
CAUTION:
Hose clamp should not interfere with the bulge of tube.
Vehicle side
• Refer to the followings when installing fluid cooler hoses.
• Refer to the followings when installing hose clamps.
CAUTION:
Hose clamp should not interfere with the bulge of tube.
Hose
Installation side
tube
Direction of paint mark
Hose insertion depth
(A)
Fluid cooler
hose A
CVT oil warmer
Frontward
Hose end reaches the
end of tube.
CVT fluid cooler
tube B
Align with the paint
marks on the CVT fluid
cooler tube B
SCIA7203E
Hose
Installation side
tube
Hose clamp
Direction of tab
Clamping position
Fluid cooler
hose A
CVT oil warmer
Frontward
5 – 9 mm (0.20 – 0.35
in) (A) from hose end
CVT fluid cooler
tube B
JSDIA2424ZZ
Hose
Installation side
tube
Direction of
paint mark
Hose insertion depth (L)
Fluid cooler
hose B
CVT fluid cooler
tube A
Frontward
: Hose end reaches the 2-
stage bulge
.
Fluid cooler tube
assembly
Leftward
Fluid cooler
hose C
Fluid cooler tube
assembly
CVT fluid cooler
Frontward
Fluid cooler
hose D
CVT fluid cooler
Fluid cooler brack-
et (with tube)
Fluid cooler
hose E
Fluid cooler brack-
et (with tube)
Fluid cooler tube
assembly
Leftward
Fluid cooler
hose F
Fluid cooler tube
assembly
CVT oil warmer
Upward
: Hose end reaches the end
of CVT oil warmer tube.
JSDIA1640ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст