Nissan X-Trail 32. Instruction — part 1413
AMBIENT SENSOR
HAC-127
< REMOVAL AND INSTALLATION >
[AUTOMATIC AIR CONDITIONING]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
AMBIENT SENSOR
Removal and Installation
INFOID:0000000010939785
REMOVAL
1.
Remove front bumper fascia assembly. Refer to
EXT-15, "Removal and Installation"
.
2.
Disconnect harness connector
.
3.
Disengage fixing pawl, and then remove ambient sensor.
INSTALLATION
Install in the reverse order of removal.
: Pawl
JMIIA3393ZZ
HAC-128
< REMOVAL AND INSTALLATION >
[AUTOMATIC AIR CONDITIONING]
IN-VEHICLE SENSOR
IN-VEHICLE SENSOR
Removal and Installation
INFOID:0000000010939786
REMOVAL
1.
Remove instrument lower panel center. Refer to
IP-14, "Removal and Installation"
(LHD models) or
(RHD models).
2.
Remove fixing screw, and then remove in-vehicle sensor.
INSTALLATION
Install in the reverse order of removal.
SUNLOAD SENSOR
HAC-129
< REMOVAL AND INSTALLATION >
[AUTOMATIC AIR CONDITIONING]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
SUNLOAD SENSOR
Removal and Installation
INFOID:0000000010939787
REMOVAL
1.
Apply protective tape (A) on instrument panel assembly to pro-
tect from damage.
2.
Disengage fixing pawls using a remover tool, and then pull up
sunload sensor.
CAUTION:
Using a remover tool wrapped in tape.
3.
Disconnect harness connector, and then remove sunload sensor.
INSTALLATION
Install in the reverse order of removal.
JMIIA3364ZZ
: Pawl
JMIIA3391ZZ
HAC-130
< REMOVAL AND INSTALLATION >
[AUTOMATIC AIR CONDITIONING]
INTAKE SENSOR
INTAKE SENSOR
Exploded View
INFOID:0000000010939788
Refer to following items.
• R9M (EXCETP FOR RUSSIA) : Refer to
.
• MR20DD : Refer to
• QR25DE : Refer to
Removal and Installation
INFOID:0000000010939789
REMOVAL
1.
Remove instrument lower cover LH. Refer to
IP-14, "Removal and Installation"
(LHD models) or
(RHD models).
2.
Remove intake sensor from A/C unit assembly.
3.
Disconnect harness connector
from intake sensor.
CAUTION:
If disconnect harness connector from intake sensor,
replace intake sensor with new one.
INSTALLATION
Note the following item, and then install in the order of removal.
CAUTION:
If disconnect harness connector from intake sensor, replace intake sensor with new one.
JMIIA3398ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст