Nissan X-Trail 32. Instruction — part 2028
TM-70
< UNIT DISASSEMBLY AND ASSEMBLY >
[6MT: RS6F94R]
MAINSHAFT AND GEAR
7.
Install 4th main gear
, using the drift (A) (SST: KV32102700).
8.
Install 5th main gear
, using the drift (A) (SST: KV32102700).
9.
Install 6th main gear
, using the drift (A) (SST: KV32102700).
10. Install mainshaft rear bearing inner race
, using the drift (A)
(SST: ST30901000).
CAUTION:
Replace mainshaft rear bearing inner race and mainshaft
rear bearing outer race as a set.
11. Install snap ring.
CAUTION:
Never reuse snap ring.
Inspection
INFOID:0000000010842469
INSPECTION AFTER DISASSEMBLY
147.515 – 147.491 (5.8077 – 5.8067)
1.675 (0.0659)
147.490 – 147.466 (5.8067 – 5.8057)
1.700 (0.0669)
147.465 – 147.441 (5.8057 – 5.8048)
1.725 (0.0679)
147.440 – 147.416 (5.8047 – 5.8038)
1.750 (0.0689)
147.415 – 147.391 (5.8037 – 5.8028)
1.775 (0.0699)
Dimension “L”
Mainshaft adjusting shim thickness
PCIB1737E
PCIB1738E
PCIB1739E
PCIB1740E
MAINSHAFT AND GEAR
TM-71
< UNIT DISASSEMBLY AND ASSEMBLY >
[6MT: RS6F94R]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
Mainshaft and Gear
Check the following items and replace if necessary.
• Damage, peeling, bend, uneven wear, and distortion of shaft.
• Excessive wear, damage, and peeling of gear.
Synchronizer Hub and Coupling Sleeve
Check the following items and replace if necessary.
• Breakage, damage, and unusual wear on contact surface of cou-
pling sleeve, synchronizer hub, and insert key.
• Coupling sleeve and synchronizer hub move smoothly.
Baulk Ring
Check contact surface of baulk ring cam and insert key for excessive
wear, uneven wear, bend, and damage. Replace if necessary.
Bearing
Check bearing for damage and unsmooth rotation. Replace if neces-
sary.
CAUTION:
• Replace mainshaft front bearing outer race and mainshaft
front bearing inner race as a set.
• Replace mainshaft rear bearing inner race and mainshaft rear
bearing outer race as a set.
PCIB1775E
SCIA1753J
SCIA0608J
SPD715
TM-72
< UNIT DISASSEMBLY AND ASSEMBLY >
[6MT: RS6F94R]
REVERSE IDLER SHAFT AND GEAR
REVERSE IDLER SHAFT AND GEAR
Exploded View
INFOID:0000000010842470
Disassembly and Assembly
INFOID:0000000010842471
DISASSEMBLY
1.
Remove reverse output gear
.
Reverse output gear
Snap ring
Reverse baulk ring
Return spring
Needle bearing
Seal washer
Reverse idler shaft
Spacer
Reverse input gear
Lock washer
Spring washer
: N·m (kg-m, ft-lb)
: Always replace after every disassembly.
: Replace the parts as a set.
JPDIC0425GB
PCIB1760E
REVERSE IDLER SHAFT AND GEAR
TM-73
< UNIT DISASSEMBLY AND ASSEMBLY >
[6MT: RS6F94R]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
2.
Remove snap ring
.
3.
Remove reverse baulk ring
and return spring
.
4.
Remove snap ring
, lock washer
, and reverse input gear
.
5.
Remove needle bearings
and washer.
ASSEMBLY
Note the following procedures, and assemble in the reverse order of disassembly.
CAUTION:
• Never reuse snap ring.
• Check that snap ring is securely installed in a groove.
• Replace reverse output gear, snap ring, reverse baulk ring, return spring, needle bearing, reverse
idler shaft, spacer, reverse input gear, and lock washer as a set.
Inspection
INFOID:0000000010842472
INSPECTION AFTER DISASSEMBLY
PCIB1759E
PCIB1758E
PCIB1757E
PCIB1761E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст