Nissan X-Trail 32. Instruction — part 1330
GW-38
< REMOVAL AND INSTALLATION >
FRONT DOOR GLASS
FRONT DOOR GLASS
Exploded View
INFOID:0000000010755106
RHD models
FRONT DOOR GLASS
FRONT DOOR GLASS : Removal and Installation
INFOID:0000000010755107
REMOVAL
CAUTION:
Never damage front door glass and front door panel.
1.
Remove front door inside handle. Refer to the following.
• Type 1: Refer to
DLK-303, "INSIDE HANDLE : Removal and Installation"
JMKIB3180GB
Front door glass run
Front door panel
Front door lower sash
Front door sealing screen
Front door regulator
Front door power window motor
Front door glass
Front door glass run lower sash
: N·m (kg-m, in-lb)
, , , , , , , , :
Indicates
that
the
part
is
connected at points with same symbol in actual vehicle.
FRONT DOOR GLASS
GW-39
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
GW
N
O
P
• Type 2: Refer to
DLK-611, "INSIDE HANDLE : Removal and Installation"
• Type 3: Refer to
DLK-774, "INSIDE HANDLE : Removal and Installation"
• Type 4: Refer to
DLK-916, "INSIDE HANDLE : Removal and Installation"
2.
Disconnect door mirror harness connector
and BSW indicator
harness connector
.
NOTE:
As per BSW indicator harness connector, only with BSW indica-
tor can be applied.
3.
Remove BSW indicator harness connector fixing clip
, door
mirror harness connector fixing clips
and harness fixing clip
.
NOTE:
As per BSW indicator harness connector, only with BSW indica-
tor can be applied.
4.
Disconnect front door speaker harness connector
, and then
remove harness fixing clip
.
5.
Cut butyl-tape inside of front door sealing screen by using cutter knife (A).
CAUTION:
Cut the butyl-tape so that remain on front door sealing screen, if the front door sealing screen is
reused.
JMKIB3127ZZ
JMKIB3128ZZ
JMKIB3129ZZ
JMKIB3130ZZ
GW-40
< REMOVAL AND INSTALLATION >
FRONT DOOR GLASS
6.
Reconnect power window main switch.
7.
Operate power window main switch to raise or lower front door glass until front door glass mounting bolts
can be seen, and then remove front door glass mounting bolts.
8.
Hold securely front door glass and pull it out of front door panel
to remove front door glass.
CAUTION:
Never damage front door glass, front door glass run and
front door panel.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
Tighten front door glass mounting bolts to the specified torque. Refer to
FRONT DOOR LOWER SASH
FRONT DOOR LOWER SASH : Removal and Installation
INFOID:0000000010755108
REMOVAL
CAUTION:
Never damage front door glass and front door panel.
1.
Remove front door inside handle. Refer to the following.
• Type 1: Refer to
DLK-303, "INSIDE HANDLE : Removal and Installation"
• Type 2: Refer to
DLK-611, "INSIDE HANDLE : Removal and Installation"
• Type 3: Refer to
DLK-774, "INSIDE HANDLE : Removal and Installation"
• Type 4: Refer to
DLK-916, "INSIDE HANDLE : Removal and Installation"
JMKIB3131ZZ
JMKIB3132ZZ
JMKIB1956ZZ
FRONT DOOR GLASS
GW-41
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
GW
N
O
P
2.
Disconnect door mirror harness connector
and BSW indicator
harness connector
.
NOTE:
As per BSW indicator harness connector, only with BSW indica-
tor can be applied.
3.
Remove BSW indicator harness connector fixing clip
, door
mirror harness connector fixing clips
and harness fixing clip
.
NOTE:
As per BSW indicator harness connector, only with BSW indica-
tor can be applied.
4.
Disconnect front door speaker harness connector
, and then
remove harness fixing clip
.
5.
Cut butyl-tape inside of front door sealing screen by using cutter knife (A).
CAUTION:
Cut the butyl-tape so that remain on front door sealing screen, if the front door sealing screen is
reused.
JMKIB3127ZZ
JMKIB3128ZZ
JMKIB3129ZZ
JMKIB3130ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст