Nissan X-Trail 32. Instruction — part 2210
SYSTEM
WT-13
< SYSTEM DESCRIPTION >
C
D
F
G
H
I
J
K
L
M
A
B
WT
N
O
P
INFORMATION DISPLAY (COMBINATION METER) : Tire Pressure Display
INFOID:0000000010715063
The adoption of this function allows tire pressure indication on the information display installed to the combina-
tion meter.
Design
Massage
Low tyre pressure
–
Tyre pressure system fault
JMEIA0247ZZ
Design
Description
• Tire pressure of each tire is displayed at side of each tire.
• Setting tire pressure of front and rear tires are displayed between front/rear
tires.
JMEIA0248ZZ
WT-14
< SYSTEM DESCRIPTION >
OPERATION
OPERATION
TPMS reset operation
INFOID:0000000010715064
DESCRIPTION
TPMS reset operation can set the present tire air content as a TPMS reference value.
This procedure must be performed:
• After tire pressure adjustment
• After tire or road wheel replacement
• After performing tire rotation
TPMS RESET PROCEDURE
1.
Adjust tire pressure for all wheels to the specified value. Refer to
.
2.
Place Ignition in the ON position.
CAUTION:
Never start the engine.
3.
Perform TPMS reset operation on the information display.
4.
Drive the vehicle between 25 km/h (16 MPH) and 100 km/h (62
MPH) for 2 minutes or more.
NOTE:
The TPMS settings are updated to driving.
CAUTION:
TPMS detects low tire pressure after this calibration. Before
calibration finish, low tire warning lamp does not turn ON.
(This is not broken.)
JSEIA0958ZZ
DIAGNOSIS SYSTEM (TIRE PRESSURE MONITORING SYSTEM)
WT-15
< SYSTEM DESCRIPTION >
C
D
F
G
H
I
J
K
L
M
A
B
WT
N
O
P
DIAGNOSIS SYSTEM (TIRE PRESSURE MONITORING SYSTEM)
CONSULT Function
INFOID:0000000010715065
APPLICATION ITEM
CONSULT performs the following functions via CAN communication with BCM.
ACTIVE TEST
ECU IDENTIFICATION
BCM part number can be read.
SELF DIAGNOSTIC RESULT
NOTE:
Before performing Self Diagnostic Result, be sure to register the tire pressure sensor ID or the actual malfunc-
tion may be different from that displayed on CONSULT.
Refer to following:
.
FREEZE FRAME DATA (FFD)
The following vehicle status is recorded when DTC is detected and is displayed on CONSULT.
Diagnosis mode
Function Description
ECU identification
Parts number of BCM can be read.
Active Test
Send the drive signal from CONSULT to the actuator. The operation check can be performed.
Self Diagnostic Result
• Retrieve DTC from BCM and display diagnostic items.
• Self-diagnostic results and freeze frame data can be read and erased quickly.
Data Monitor
Monitor the input/output signal of the BCM in real time.
Work Support
This mode enables a technician to adjust some devices faster and more accurately.
Re/programming, Configuration
• Read and save the vehicle specification (TYPE ID).
• Write the vehicle specification (TYPE ID) when replacing BCM.
Test Item
Description
FLASHER
This test is able to check turn signal lamp operation [On/Off].
WARNING LAMP
This test is able to check tire pressure warning lamp operation [On/Off].
ID REGIST WARNING
This test is able to check ID regist warning chime operation [On/Off].
HORN
This test is able to check horn operation [On/Off].
Item name
Display item
SET AIR PRESSURE 2 FL
Tire pressure calculated by reference temperature front left tire
SET AIR PRESSURE 2 FR
Tire pressure calculated by reference temperature front right tire
SET AIR PRESSURE 2 RR
Tire pressure calculated by reference temperature rear right tire
SET AIR PRESSURE 2 RL
Tire pressure calculated by reference temperature rear left tire
WARNING AIR PRESSURE FL
Warning air pressure front left
WARNING AIR PRESSURE FR
Warning air pressure front right
WARNING AIR PRESSURE RR
Warning air pressure rear right
WARNING AIR PRESSURE RL
Warning air pressure rear left
AIR PRESS FL
Air pressure front left
AIR PRESS FR
Air pressure front right
AIR PRESS RR
Air pressure rear right
AIR PRESS RL
Air pressure rear left
SET TEMPERATURE
Set temperature
TIRE TEMPERATURE FL
Tire temperature front left
TIRE TEMPERATURE FR
Tire temperature front right
WT-16
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (TIRE PRESSURE MONITORING SYSTEM)
DATA MONITOR
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
TIRE TEMPERATURE RR
Tire temperature rear right
TIRE TEMPERATURE RL
Tire temperature rear left
Item name
Display item
Monitor Item (Unit)
Description
VHCL SPEED SE (km/h)
Vehicle speed of the moment a particular DTC is detected
AIR PRESS FL (kPa, kgf/cm
2
or Psi)
Indicates air pressure of front left tire.
AIR PRESS FR (kPa, kgf/cm
2
or Psi)
Indicates air pressure of front right tire.
AIR PRESS RR (kPa, kgf/cm
2
or Psi)
Indicates air pressure of rear right tire.
AIR PRESS RL (kPa, kgf/cm
2
or Psi)
Indicates air pressure of rear left tire.
LOW TIRE PRESSURE W/L (Off/On)
Indicates condition of low tire pressure warning lamp in combination meter.
BUZZER 2 (Off/On)
Indicates condition of buzzer in combination meter.
TIRE TEMPERATURE FL (
°
C)
Indicates tire temperature of front left tire.
TIRE TEMPERATURE FR (
°
C)
Indicates tire temperature of front right tire.
TIRE TEMPERATURE RR (
°
C)
Indicates tire temperature of rear right tire.
TIRE TEMPERATURE RL (
°
C)
Indicates tire temperature of rear left tire.
HAZARD (Off/On)
Indicates condition of hazard.
WARNING AIR PRESSURE FL (kPa, kgf/cm
2
or Psi)
Indicates warning air pressure front left tire.
WARNING AIR PRESSURE FR (kPa, kgf/cm
2
or Psi)
Indicates warning air pressure front right tire.
WARNING AIR PRESSURE RR (kPa, kgf/cm
2
or Psi)
Indicates warning air pressure rear right tire.
WARNING AIR PRESSURE RL (kPa, kgf/cm
2
or Psi)
Indicates warning air pressure rear left tire.
SET AIR PRESSURE 1 FL (kPa, kgf/cm
2
or Psi)
Reference pressure front left tire.
SET AIR PRESSURE 1 FR (kPa, kgf/cm
2
or Psi)
Reference pressure front right tire.
SET AIR PRESSURE 1 RR (kPa, kgf/cm
2
or Psi)
Reference pressure rear right tire.
SET AIR PRESSURE 1 RL (kPa, kgf/cm
2
or Psi)
Reference pressure rear left tire.
SET AIR PRESSURE 2 FL (kPa, kgf/cm
2
or Psi)
Tire pressure calculated by reference temperature front left tire.
SET AIR PRESSURE 2 FR (kPa, kgf/cm
2
or Psi)
Tire pressure calculated by reference temperature front right tire.
SET AIR PRESSURE 2 RR (kPa, kgf/cm
2
or Psi)
Tire pressure calculated by reference temperature rear right tire.
SET AIR PRESSURE 2 RL (kPa, kgf/cm
2
or Psi)
Tire pressure calculated by reference temperature rear left tire.
SET TEMPERATURE (
°
C)
Reference temperature registered after resetting the TPMS.
TPMS SET SWITCH (Off/On)
Indicates condition of tire pressure monitor system reset switch.
HORN (Off/On)
Indicates condition of horn.
AUTO LOCATION STATUS RL (N-ID/NO CHG/IN
PROG/T-OUT)
NOTE:
This item is displayed, but cannot be monitored.
AUTO LOCATION STATUS FL (N-ID/NO CHG/IN
PROG/T-OUT)
AUTO LOCATION STATUS FR (N-ID/NO CHG/IN
PROG/T-OUT)
AUTO LOCATION STATUS RR (N-ID/NO CHG/IN
PROG/T-OUT)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст