Nissan X-Trail 32. Instruction — part 362
DAS
SYSTEM
DAS-189
< SYSTEM DESCRIPTION >
[CHASSIS CONTROL]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
Active ride control function
SYNCHRONIZATION WITH MASTER WARNING LAMP
Applicable
Refer to
MWI-47, "WARNING LAMPS/INDICATOR LAMPS : Master Warning Lamp"
Active engine brake (cornering control) function is active. (Steering angle is the
specified angle or more in the leftward direction.)
Active engine brake (cornering control) function is active. (Steering angle is the
specified angle or more in the rightward direction.)
Design
Description
Active ride control (brake control) function inactive.
Active ride control (brake control) function is active.
Design
Description
JSOIA1468ZZ
JSOIA1469ZZ
JSFIA2371ZZ
JSOIA1470ZZ
DAS-190
< SYSTEM DESCRIPTION >
[CHASSIS CONTROL]
SYSTEM
SYSTEM DIAGRAM
SIGNAL PATH
Active Trace Control Function
• The chassis control module transmits a active trace control display request signal to the combination meter
via CAN communication.
• The combination meter shows the chassis control display on the information display, according to the signal.
Active Engine Brake Function
• The chassis control module transmits a active engine brake display request signal to the combination meter
via CAN communication.
• The combination meter shows the chassis control display on the information display, according to the signal.
Active Ride Control Function
• The chassis control module transmits a active ride control display request signal to the combination meter
via CAN communication.
• The combination meter shows the chassis control display on the information display, according to the signal.
Malfunction of Chassis Control System Detected
• The chassis control module transmits a chassis control module malfunction signal to the combination meter
via CAN communication.
• The combination meter shows the chassis control display on the information display, according to the signal.
WARNING/INDICATOR OPERATING CONDITION
Warning
When all of the following conditions are satisfied
• Ignition switch is ON
• Chassis control system malfunction is detected. Refer to
Operating
• Active trace control function: Refer to
DAS-173, "ACTIVE TRACE CONTROL (DYNAMIC CORNERING
ENHANCEMENT) FUNCTION : System Description"
• Active engine brake function: Refer to
DAS-179, "ACTIVE ENGINE BRAKE FUNCTION : System Descrip-
• Active ride control function: Refer to
DAS-182, "ACTIVE RIDE CONTROL FUNCTION : System Descrip-
JSOIA1566GB
DAS
DIAGNOSIS SYSTEM (CHASSIS CONTROL MODULE)
DAS-191
< SYSTEM DESCRIPTION >
[CHASSIS CONTROL]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
DIAGNOSIS SYSTEM (CHASSIS CONTROL MODULE)
CONSULT Function
INFOID:0000000010721695
APPLICATION ITEM
CONSULT can display each diagnostic item using the diagnostic test modes as follows.
*
: The following diagnosis information is erased by erasing.
• DTC
• Freeze frame data (FFD)
ECU IDENTIFICATION
Chassis control module part number can be read.
SELF DIAGNOSTIC RESULT
When “CRNT” is displayed on self-diagnosis result
• The system is presently malfunctioning.
When “PAST” is displayed on self-diagnosis result
• System malfunction in the past is detected, but the system is presently normal.
Freeze frame data (FFD)
When DTC is detected, a vehicle state shown below is recorded and displayed on CONSULT.
Mode
Function description
ECU identification
Parts number of chassis control module can be read.
Self Diagnostic Results
Self-diagnostic results and freeze frame data (FFD) can be read and erased quickly.
*
DATA MONITOR
Input/Output data in chassis control module can be read.
ACTIVE TEST
Send the drive signal from CONSULT to the actuator. The operation check can be performed.
Re/programming, Configuration
• Read and save the vehicle specification (TYPE ID).
• Write the vehicle specification (TYPE ID) when replacing chassis control module.
Item name
Indication/Unit
Display item
Odometer/Trip meter
km
Total mileage (Odometer value) of the moment a particular.
DTC LOCAL CODE
—
Not used
CAN DIAG PERMIS CONDITION
Off / On
Displays CAN network diagnosis status.
BRAKE SWITCH 1
Off / On
Displays brake switch operating status (Off: close / On: open).
BRAKE SWITCH 2
Off / On
Displays brake switch operating status (Off: open / On: close).
ABS
NORMAL/ABNOR
Displays ABS function status.
TCS
NORMAL/ABNOR
Displays TCS function status.
VDC
NORMAL/ABNOR
Displays VDC function status.
VEHICLE SPEED
km
Displays the vehicle speed.
FR WHEEL SPEED
rpm
Displays the rotational speed of front RH tire.
FL WHEEL SPEED
rpm
Displays the rotational speed of front LH tire.
RR WHEEL SPEED
rpm
Displays the rotational speed of rear RH tire.
RL WHEEL SPEED
rpm
Displays the rotational speed of rear LH tire.
STEERING ANG SENSOR
deg
Displays the steering angle from the steering angle sensor.
SIDE G SENSOR
G
Displays the side G.
DECEL G SENSOR
G
Displays the decel G.
YAW RATE SENSOR
deg/s
Displays the yaw rate.
THRTL OPENING
%
Displays the electric throttle position.
DAS-192
< SYSTEM DESCRIPTION >
[CHASSIS CONTROL]
DIAGNOSIS SYSTEM (CHASSIS CONTROL MODULE)
DATA MONITOR
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
SHIFT POSITION
—
Not used
PRESS SENSOR
bar
Displays the brake fluid pressure.
Item name
Indication/Unit
Display item
Item
[Unit]
Description
IGN VOLT
[V]
Displays the ignition power supply voltage.
CONTROL MODULE MALF
[Off / On]
Displays the chassis control module malfunction.
CAN DIAG STATUS
[Off / On]
Displays CAN network diagnosis status.
STOP LAMP OFF RELAY 1
—
Displayed but not used.
STOP LAMP OFF RELAY 2
—
Displayed but not used.
ESS RELAY
—
Displayed but not used.
VEHICLE SPEED
[km/h]
Displays the vehicle speed.
FR WHEEL SPEED
[rpm]
Displays the rotational speed of front RH tire.
FL WHEEL SPEED
[rpm]
Displays the rotational speed of front LH tire.
RR WHEEL SPEED
[rpm]
Displays the rotational speed of rear RH tire.
RL WHEEL SPEED
[rpm]
Displays the rotational speed of rear LH tire.
STEERING ANG SENSOR
[deg]
Displays the steering angle from the steering angle sensor.
DECEL G SENSOR
[G]
Displays the decel G.
SIDE G SENSOR
[G]
Displays the side G.
YAW RATE SENSOR
[deg/s]
Displays the yaw rate.
ACCELE PEDAL POSITION
[%]
Displays the accelerator pedal position.
THROTTLE CONTROL
[NORMAL / INCORR / PREV /
INPOSSI]
Displays the electric throttle status.
SHIFT POSITION
—
Displayed but not used.
BRAKE SWITCH 2
[Off / On]
Displays the brake pedal position switch operating status (Off: close
/ On: open).
BRAKE SWITCH 1
[Off / On]
Displays the brake pedal position switch operating status (Off: open
/ On: close).
STOP LAMP SW
[ACT / INACT]
Displays the stop lamp switch status.
PRESS SENSOR
[bar]
Displays the brake fluid pressure.
ABS
[NORMAL / ABNOR]
Displays the ABS function status.
ABS MALF
[NORMAL / ABNOR]
Displays the ABS function status.
EBD
[NORMAL / ABNOR]
Displays the EBD function status.
ACCELE PEDAL MALF
[NORMAL / ABNOR]
Displays the accelerator pedal status.
TCS
[NORMAL / ABNOR]
Displays the TCS function status.
TCS MALF
[NORMAL / ABNOR]
Displays the TCS function status.
VDC
[NORMAL / ABNOR]
Displays the VDC function status.
VDC MALF
[NORMAL / ABNOR]
Displays the VDC function status.
VDC OFF SWITCH
[Off / On]
Displays VDC OFF switch status.
PARKING BRAKE
—
Displayed but not used.
DRV TRQ CTRL MODE
[INITIAL / NORMAL / STOP 1
/ STOP 2 / LIMIT 1 / PROHIBI]
Displays the status of correction to slightly increase/decrease the
drive torque.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст