Nissan X-Trail 32. Instruction — part 2036
TM-102
< SYMPTOM DIAGNOSIS >
[6MT: RS6F52A]
NOISE, VIBRATION AND HARSHNESS (NVH) TROUBLESHOOTING
SUSPECTED PARTS
(Possible cause)
OIL
(Oil
le
ve
l i
s
l
o
w)
OI
L (W
ro
ng
oi
l)
OIL
(Oil
le
ve
l i
s
h
ig
h
)
GASKET
(Dam
ag
ed
)
OIL
SEA
L (W
orn
o
r da
ma
ge
d)
SHIF
T
CONT
ROL
L
INKAG
E (W
orn
o
r da
ma
ge
d,
de
fe
ct
of
ad
ju
s
tm
e
n
t)
ST
RIKING ROD ASS
EMBL
Y
(W
orn
or damaged)
SHIF
T
FO
RK (W
orn
o
r
da
ma
ge
d)
GEAR
(W
orn
or da
ma
ge
d)
CAM
SI
DE
OF CL
UT
CH GEAR (W
orn
or
da
ma
ge
d)
BE
ARING (W
orn
or
dam
a
ged
)
BAUL
K RIN
G
(W
orn
or da
ma
ge
d)
IN
S
E
R
T
SPRING
(Dam
ag
ed
)
Reference
(2WD),
(4WD)
(2WD),
(4WD)
(2WD),
(4WD)
(2WD),
(4WD)
Symptoms
Noise
1
2
3
3
Oil leakage
3
1
2
2
Hard to shift or will not shift
2
2
1
3
3
3
3
Jumps out of gear
1
2
3
3
3
M/T OIL
TM-103
< PERIODIC MAINTENANCE >
[6MT: RS6F52A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
PERIODIC MAINTENANCE
M/T OIL
2WD
2WD : Inspection
INFOID:0000000010921081
OIL LEAKAGE
Make sure that gear oil is not leaking from transaxle or around it.
OIL LEVEL
1.
Remove plug
.
2.
Measure the oil level (L) using a suitable gauge (A) as shown in
the figure and check if it is within the specifications.
CAUTION:
• Turn the ignition switch OFF while checking oil level.
• Attach the suitable gauge to the wall of the plug mounting
hole for accurate measurement.
3.
Set O-ring on plug and install it to transaxle assembly.
CAUTION:
Never reuse O-ring.
4.
Tighten plug mounting bolt to the specified torque. Refer to
2WD : Draining
INFOID:0000000010921082
1.
Start engine and let it run to warm up transaxle.
2.
Stop engine. Remove drain plug
and gasket, then drain gear
oil.
3.
Set a gasket on drain plug and install it to transaxle assembly.
CAUTION:
Never reuse gasket.
4.
Tighten drain plug to the specified torque. Refer to
2WD : Refilling
INFOID:0000000010921083
1.
Remove plug
.
2.
Fill with new gear oil.
NOTE:
Oil capacity is reference. Because oil level is controlled by oil
surface position.
3.
After refilling gear oil, check the oil level. Refer to
4.
Set O-ring on plug and install it to transaxle assembly.
CAUTION:
Never reuse O-ring.
Oil level
: Refer to
JPDIC0138ZZ
JSDIA6146ZZ
Recommended oil and
capacity (reference)
: Refer to
.
JSDIA6147ZZ
TM-104
< PERIODIC MAINTENANCE >
[6MT: RS6F52A]
M/T OIL
5.
Tighten plug mounting bolt to the specified torque. Refer to
4WD
4WD : Inspection
INFOID:0000000010924928
OIL LEAKAGE
Make sure that gear oil is not leaking from transaxle or around it.
OIL LEVEL
1.
Remove filler plug
.
2.
Measure the oil level (L) using a suitable gauge (A) as shown in
the figure and check if it is within the specifications.
CAUTION:
• Turn the ignition switch OFF while checking oil level.
• Attach the suitable gauge to the wall of the plug mounting
hole for accurate measurement.
3.
Set gasket on filler plug and install it to transaxle assembly.
CAUTION:
Never reuse gasket.
4.
Tighten filler plug to the specified torque. Refer to
.
4WD : Draining
INFOID:0000000010924929
1.
Start engine and let it run to warm up transaxle.
2.
Stop engine. Remove drain plug
and gasket, then drain gear
oil.
3.
Set a gasket on drain plug and install it to transaxle assembly.
CAUTION:
Never reuse gasket.
4.
Tighten drain plug to the specified torque. Refer to
4WD : Refilling
INFOID:0000000010924930
1.
Remove filler plug
.
2.
Fill with new gear oil.
NOTE:
Oil capacity is reference. Because oil level is controlled by oil
surface position.
3.
After refilling gear oil, check the oil level. Refer to
4.
Set gasket on filler plug and install it to transaxle assembly.
CAUTION:
Never reuse gasket.
: Vehicle front
Oil level
: Refer to
JPDIC0139ZZ
JSDIA6154ZZ
Recommended oil and
capacity (reference)
: Refer to
.
JSDIA6155ZZ
M/T OIL
TM-105
< PERIODIC MAINTENANCE >
[6MT: RS6F52A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
5.
Tighten filler plug to the specified torque. Refer to
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст