Nissan X-Trail 32. Instruction — part 611
FUEL FILLER LID OPENER
DLK-785
< REMOVAL AND INSTALLATION >
[TYPE 3]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
2.
Remove fuel mounting pin
.
3.
Remove mounting bolts, and then remove fuel filler lid assembly.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• After installation, apply the touch-up paint (the body color) onto the head of the mounting screws.
• After installation, check fuel filler lid assembly open/close, lock/unlock operation.
NOTE:
• The following table shows the specified values for checking normal installation status.
• Fitting adjustment cannot be performed.
Unit: mm [in]
FUEL FILLER LID LOCK
FUEL FILLER LID LOCK : Removal and Installation
INFOID:0000000010728601
REMOVAL
1.
Fully open fuel filler lid.
2.
Remove luggage side lower finisher RH. Refer to
INT-43, "LUGGAGE SIDE LOWER FINISHER :
.
3.
Rotate fuel filler lid lock assembly to disengage pawls and
remove fuel filler lid lock assembly according to the numerical
order 1
→
2 indicated by arrows as shown in the figure.
NOTE:
Operation is performed easily when rotating fuel filler lid lock
from passenger room side.
4.
Disengage fuel filler lid opener cable
and remove fuel filler lid
opener cable while pressing stopper pin
according to the
numerical order 1
→
4 indicated by arrows as shown in the figure.
JMKIB3183ZZ
Clearance
Evenness
Fuel filler lid – Body side outer
2.5 – 4.5
[0.098 – 0.177]
(
−
1.0) – (+1.0)
[(
−
0.039) – (+0.039)]
: Pawl
: Vehicle front
JMKIB1094ZZ
JMKIA5719ZZ
DLK-786
< REMOVAL AND INSTALLATION >
[TYPE 3]
FUEL FILLER LID OPENER
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
After installation, check fuel filler lid assembly open/close, lock/unlock operation.
FUEL FILLER OPENER CABLE
FUEL FILLER OPENER CABLE : Removal and Installation
INFOID:0000000010728602
REMOVAL
1.
Remove hood lock control handle mounting bolts, and then hood lock control handle. Refer to
"HOOD LOCK CONTROL HANDLE : Removal and Installation"
.
2.
Remove fuel filler lid opener cable
from fuel filler lid opener
lever
according to the numerical order 1
→
2 indicated by
arrows as shown in the figure.
3.
Remove kicking plate inner RH and rear kicking plate inner RH. Refer to
.
4.
Remove dash side finisher RH. Refer to
INT-26, "DASH SIDE FINISHER : Removal and Installation"
.
5.
Remove center pillar lower garnish RH. Refer to
INT-27, "CENTER PILLAR LOWER GARNISH : Removal
6.
Remove luggage side lower finisher RH. Refer to
INT-43, "LUGGAGE SIDE LOWER FINISHER :
.
7.
Remove fuel filler lid opener cable from fuel filler lid lock assembly. Refer to
LOCK : Removal and Installation"
.
8.
Remove fuel filler lid opener cable from harness protectors.
9.
Remove fuel filler lid opener cable fixing clips, and then remove fuel filler lid opener cable.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
After installation, check fuel filler lid assembly open/close, lock/unlock operation.
JMKIA5672ZZ
DOOR SWITCH
DLK-787
< REMOVAL AND INSTALLATION >
[TYPE 3]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
DOOR SWITCH
Removal and Installation
INFOID:0000000010708478
REMOVAL
1.
Remove the TORX bolt
.
2.
Disconnect door switch harness connector and then remove
door switch
.
INSTALLATION
Install in the reverse order of removal.
JMKIA2173ZZ
DLK-788
< REMOVAL AND INSTALLATION >
[TYPE 3]
DOOR LOCK STATUS INDICATOR
DOOR LOCK STATUS INDICATOR
Removal and Installation
INFOID:0000000010735504
REMOVAL
1.
Remove A/C control. Refer to
HAC-125, "Removal and Installation"
2.
Remove door lock status indicator mounting bolt
, and then
remove door lock status indicator
.
INSTALLATION
Install in the reverse order of removal.
JMKIB3656ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст