Nissan X-Trail 32. Instruction — part 1234
HIGH-MOUNTED STOP LAMP
EXL-393
< REMOVAL AND INSTALLATION >
[HALOGEN HEADLAMP]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
3.
Disengage back door cover fixing metal clips and pawls using a
remover tool (A), and then remove back door cover.
4.
Remove high-mounted stop lamp mounting nuts
.
5.
Disconnect high-mounted stop lamp harness connector
, and
then remove high-mounted stop lamp.
INSTALLATION
Install in the reverse order of removal.
Replacement
INFOID:0000000010789919
CAUTION:
Disconnect battery negative terminal or remove power circuit fuse when performing the operation for
preventing electric leakage. Refer to
EXL-214, "Precautions for Removing Battery Terminal"
.
HIGH-MOUNTED STOP LAMP BULB
CAUTION:
Replacement of a single part is not possible due to the adoption of LED bulb. For replacement, replace
high-mounted stop lamp unit as a set. Refer to
EXL-392, "Removal and Installation"
.
: Pawl
: Metal clip
JMLIA4975ZZ
JMLIA4976ZZ
JMLIA4977ZZ
EXL-394
< REMOVAL AND INSTALLATION >
[HALOGEN HEADLAMP]
LICENSE PLATE LAMP
LICENSE PLATE LAMP
Exploded View
INFOID:0000000010789920
Removal and Installation
INFOID:0000000010789921
CAUTION:
Disconnect battery negative terminal or remove power circuit fuse when performing the operation for
preventing electric leakage. Refer to
EXL-214, "Precautions for Removing Battery Terminal"
.
REMOVAL
1.
Remove back door finisher cap. Refer to
EXT-66, "Removal and Installation"
.
2.
Remove license plate lamp fixing screw.
3.
Disengage license plate lamp housing fixing portion from back door.
4.
Disconnect license plate lamp harness connector, and then remove license plate lamp.
INSTALLATION
Install in the reverse order of removal.
Replacement
INFOID:0000000010789922
CAUTION:
• Disconnect the battery negative terminal or remove power circuit fuse when performing the opera-
tion for preventing electric leakage. Refer to
EXL-214, "Precautions for Removing Battery Terminal"
License plate lamp bulb socket
License plate lamp bulb
Seal packing
License plate lamp housing
: Vehicle front
JMLIA4964ZZ
LICENSE PLATE LAMP
EXL-395
< REMOVAL AND INSTALLATION >
[HALOGEN HEADLAMP]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
• Never touch bulb by hand while it is lit or right after being turned OFF.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
LICENSE PLATE LAMP BULB
1.
Remove license plate lamp. Refer to
EXL-394, "Removal and Installation"
.
2.
Rotate license plate lamp bulb socket counterclockwise and unlock it.
3.
Remove license plate lamp bulb from license plate lamp bulb socket.
EXL-396
< REMOVAL AND INSTALLATION >
[HALOGEN HEADLAMP]
REAR FOG LAMP
REAR FOG LAMP
Exploded View
INFOID:0000000010789923
Removal and Installation
INFOID:0000000010789924
CAUTION:
Disconnect battery negative terminal or remove power circuit fuse when performing the operation for
preventing electric leakage. Refer to
EXL-214, "Precautions for Removing Battery Terminal"
.
REMOVAL
1.
Remove rear bumper fascia. Refer to
EXT-18, "Removal and Installation"
2.
Remove rear fog lamp mounting nuts.
3.
Remove rear fog lamp from rear bumper fascia.
INSTALLATION
Install in the reverse order of removal.
Replacement
INFOID:0000000010789925
CAUTION:
• Disconnect the battery negative terminal or remove power circuit fuse when performing the opera-
tion for preventing electric leakage. Refer to
EXL-214, "Precautions for Removing Battery Terminal"
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
• Never touch bulb by hand while it is lit or right after being turned OFF.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
REAR FOG LAMP BULB
1.
Remove rear bumper fascia. Refer to
EXT-18, "Removal and Installation"
2.
Disconnect rear fog lamp bulb harness connector.
3.
Rotate rear fog lamp bulb socket counterclockwise and unlock it.
4.
Remove rear fog lamp bulb from rear fog lamp bulb socket.
Rear bumper fascia
Rear fog lamp
JMLIA5377ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст