Nissan X-Trail 32. Instruction — part 1593
MWI-54
< SYSTEM DESCRIPTION >
SYSTEM
When rear fog lamp is turned ON.
SHUTOFF CONDITION
When rear fog lamp is turned OFF.
WARNING LAMPS/INDICATOR LAMPS : Seat Belt Warning Lamp
INFOID:0000000010743088
DESIGN/PURPOSE
Seat belt warning lamp warns the driver that driver seat belt is not
fastened.
BULB CHECK
Not applicable.
SYNCHRONIZATION WITH MASTER WARNING LAMP
Not applicable.
SYSTEM DIAGRAM
SIGNAL PATH
Combination meter turns seat belt warning lamp ON according to driver seat belt buckle switch signal.
LIGHTING CONDITION
Combination meter turns seat belt warning lamp ON when all of the following conditions are satisfied.
• Ignition switch is ON.
• Driver seat belt is not fastened. (Driver seat belt buckle switch is ON.)
• Passenger seat belt is not fastened. (Passenger seat belt buckle switch is ON.)
SHUTOFF CONDITION
• Ignition switch is ON.
• Driver seat belt is not fastened. (Driver seat belt buckle switch is ON.)
• Passenger seat belt is not fastened. (Passenger seat belt buckle switch is ON.)
• Vehicle speed 15km/h (9.3 MPH) or more.
JPNIA1874ZZ
JMNIA0420GB
MWI
SYSTEM
MWI-55
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
TIMING CHART
WARNING LAMPS/INDICATOR LAMPS : Security Indicator Lamp (Turn ON)
INFOID:0000000010743992
DESIGN/PURPOSE
The warning lamp warns the driver that INFINITI VEHICLE IMMOBI-
LIZER SYSTEM is not normal.
SYSTEM DIAGRAM
JMNIA0421GB
JPNIA1906ZZ
JMKIB0130GB
MWI-56
< SYSTEM DESCRIPTION >
SYSTEM
*: For DTCs that allow security indicator lamp to turn ON when detected, refer to
SIGNAL PATH
• BCM transmits security indicator lamp signal to combination meter when a malfunction of INFINITI VEHICLE
IMMOBILIZER SYSTEM is detected.
• Combination meter turns security indicator lamp ON, according to security indicator lamp signal.
LIGHTING CONDITION
When all of the following conditions are satisfied.
• Ignition switch: ON position
• A malfunction of INFINITI VEHICLE IMMOBILIZER SYSTEM is detected
SHUTOFF CONDITION
Erase DTC
TIMING CHART
WARNING LAMPS/INDICATOR LAMPS : Security Indicator Lamp (Blinks)
INFOID:0000000010743993
DESIGN/PURPOSE
The indicator lamp warns externally that the vehicle is equipped with
INFINITI VEHICLE IMMOBILIZER SYSTEM.
SYSTEM DIAGRAM
JMKIB0131GB
JPNIA1906ZZ
JMKIB0132GB
MWI
SYSTEM
MWI-57
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SIGNAL PATH
• BCM transmits security indicator lamp signal to combination meter when ignition switch is turned OFF
• Combination meter blinks security indicator lamp, according to security indicator lamp signal.
LIGHTING CONDITION
Ignition switch: OFF position
SHUTOFF CONDITION
Ignition switch: Except OFF position
TIMING CHART
WARNING LAMPS/INDICATOR LAMPS : SRS Air Bag Warning Lamp
INFOID:0000000010688218
DESIGN/PURPOSE
The warning lamp warns the driver that SRS air bag system is not
normal.
BULB CHECK
For seven seconds after the ignition switch is turned ON.
SYSTEM DIAGRAM
SIGNAL PATH
• When a malfunction is detected, air bag diagnosis sensor unit transmits the warning signal to combination
meter.
JMKIB0133GB
JPNIA1904ZZ
JMHIA2940GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст