Nissan X-Trail 32. Instruction — part 604
REAR DOOR
DLK-757
< REMOVAL AND INSTALLATION >
[TYPE 3]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
3.
Remove rear door hinge mounting bolts and nuts of vehicle body side, and then remove rear door hinge.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• Apply anticorrosive agent onto the mounting surface.
• After installation, perform the fitting adjustment. Refer to
DLK-754, "DOOR ASSEMBLY : Adjust-
• After installing, apply the touch-up paint (the body color) onto the head of door hinge mounting bolts
and nuts.
• After installation, check that door opens and closes normally. Refer to
.
DOOR CHECK LINK
DOOR CHECK LINK : Removal and Installation
INFOID:0000000010728566
REMOVAL
1.
Fully close rear door glass.
2.
Remove rear door finisher. Refer to
INT-19, "Removal and Installation"
.
3.
Disconnect harness connector of rear door speaker.
4.
Remove mounting bolts of rear door speaker, and then remove rear door speaker.
5.
Remove door check link mounting bolt of vehicle body side.
6.
Remove door check link mounting bolts of door panel, and then
take door check link
out from the hole of door panel
.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
After installation, check that door opens and closes normally. Refer to
.
DOOR WEATHER-STRIP
DOOR WEATHER-STRIP : Removal and Installation
INFOID:0000000010728567
REMOVAL
1.
Apply protective tape (A) to rear door panel
around rear door
weather-strip
fixing clips for preventing damage.
JMKIB3073ZZ
JMKIB2232ZZ
DLK-758
< REMOVAL AND INSTALLATION >
[TYPE 3]
REAR DOOR
2.
Disengage fixing clips on the reverse side of rear door weather-
strip using a remover tool (A).
CAUTION:
• Never damage rear door panel.
• When removing, never confuse the 3 types of rear door weather-strip
fixing clips
,
and
.
3.
Remove front fixing clips from weather-strip.
: Clip
JMKIB2233ZZ
: Vehicle front
JMKIB3090ZZ
JMKIB3091ZZ
REAR DOOR
DLK-759
< REMOVAL AND INSTALLATION >
[TYPE 3]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
4.
Disengage fixing pawl on front upper end of rear door weather-strip using a remover tool (A), and then
remove weather-strip clip.
5.
Remove rear fixing clips from weather-strip.
6.
Disengage fixing pawl on rear upper end of rear door weather-strip using a remover tool (A), and then
remove weather-strip clip.
7.
Remove door check link mounting bolt of vehicle body side.
8.
Remove rear door weather-strip from rear door panel.
INSTALLATION
Install in the reverse order of removal.
: Pawl
JMKIB3092ZZ
JMKIB3093ZZ
: Pawl
JMKIB3094ZZ
DLK-760
< REMOVAL AND INSTALLATION >
[TYPE 3]
BACK DOOR
BACK DOOR
Exploded View
INFOID:0000000010728568
BACK DOOR ASSEMBLY
BACK DOOR ASSEMBLY : Removal and Installation
INFOID:0000000010728569
CAUTION:
• Back door is made of resin. Never apply strong force to it, and be careful to prevent contact with oil.
• Perform work with 2 workers, because of its heavy weight.
• Use protective tape or shop cloth to protect from damage during removal and installation.
Back door hinge
Back door stay
Back door weather-strip
Bumper rubber
Wedge bracket
Back door wedge
Back door striker
TORX bolt
Back door panel
Plug
Stud ball
Back door damper
: Center mark
: Seam
: Vehicle front
: Always replace after every disassembly.
: N·m (kg-m, in-lb)
: Body grease
,
: Indicates that the part is connected at points with same symbol in actual vehicle.
JMKIB2695GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст