Nissan X-Trail 32. Instruction — part 2022
TM-46
< UNIT DISASSEMBLY AND ASSEMBLY >
[6MT: RS6F94R]
TRANSAXLE ASSEMBLY
SHIFT FORK AND FORK ROD
Reverse output gear
Snap ring
Reverse baulk ring
Return spring
Needle bearing
Seal washer
Reverse idler shaft
Spacer
Reverse input gear
Lock washer
Spring washer
: N·m (kg-m, ft-lb)
: Always replace after every disassembly.
: Replace the parts as a set.
JPDIC0425GB
TRANSAXLE ASSEMBLY
TM-47
< UNIT DISASSEMBLY AND ASSEMBLY >
[6MT: RS6F94R]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
FINAL DRIVE
Shift lever (outer)
Shift lever (inner)
Retaining pin
Selector
Select lever
Reverse fork rod
1st-2nd fork rod
Fork rod
: Always replace after every disassembly.
: Replace the parts as a set.
JSDIA5985ZZ
TM-48
< UNIT DISASSEMBLY AND ASSEMBLY >
[6MT: RS6F94R]
TRANSAXLE ASSEMBLY
Disassembly and Assembly
INFOID:0000000010842463
DISASSEMBLY
1.
Remove drain plug and gasket from clutch housing, then drain gear oil.
2.
Remove filler plug and gasket from transaxle case.
3.
Remove retaining pin with a pin punch to remove select lever
.
Shim
Differential side bearing outer race
(transaxle case side)
Differential side bearing inner race
(transaxle case side)
Final gear
Differential assembly
Differential side bearing inner race
(clutch housing side)
Differential side bearing outer race
(clutch housing side)
: N·m (kg-m, ft-lb)
: Replace the parts as a set.
JSDIA5987GB
JSDIA6129ZZ
TRANSAXLE ASSEMBLY
TM-49
< UNIT DISASSEMBLY AND ASSEMBLY >
[6MT: RS6F94R]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
4.
Remove bracket
and position switch
from transaxle case.
5.
Remove transaxle case mounting bolts (
).
6.
Remove reverse idler shaft mounting bolt (
) and seal washer.
7.
Remove transaxle case
while rotating shift lever (outer)
in
the direction as shown in the figure.
8.
Remove selector spring
from return bushing
.
JSDIA6130ZZ
PCIB1694E
PCIB1695E
JPDIC0444ZZ
JPDIC0445ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст