Nissan X-Trail 32. Instruction — part 425
SYSTEM (INTELLIGENT KEY SYSTEM)
DLK-41
< SYSTEM DESCRIPTION >
[TYPE 1]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
DOOR LOCK FUNCTION
JMKIB3708GB
DLK-42
< SYSTEM DESCRIPTION >
[TYPE 1]
SYSTEM (INTELLIGENT KEY SYSTEM)
DOOR LOCK FUNCTION : System Description
INFOID:0000000010708037
SYSTEM DIAGRAM
Door lock function controls operation function of the following items.
• Door lock and unlock function (door request switch)
• Anti-hijack function (door request switch)
• Reminder function (door request switch)
• Auto door lock function (door request switch)
• Door lock status indicator operation
DOOR LOCK AND UNLOCK FUNCTION (DOOR REQUEST SWITCH)
When pressing the door request switch, it is possible to lock and unlock the door by carrying the Intelligent
Key.
Operation Description
• When the BCM detects that each door request switch is pressed, it starts the outside key antenna and inside
key antenna corresponding to the pressed door request switch and transmits the request signal to the Intelli-
gent Key. And then, check that the Intelligent Key is near the door.
• If the Intelligent Key is within the outside key antenna detection area, it receives the request signal and
transmits the key ID signal to the BCM via remote keyless entry receiver.
• BCM receives the key ID signal and compares it with the registered key ID.
• BCM lock/unlock each door lock actuator.
Operation Condition
If the following conditions are satisfied, door lock and unlock operation is performed if the door request switch
is operated.
JMKIB3641GB
SYSTEM (INTELLIGENT KEY SYSTEM)
DLK-43
< SYSTEM DESCRIPTION >
[TYPE 1]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
*: Even with a registered Intelligent Key remaining inside the vehicle, door locks can be unlocked from outside of the vehicle with a spare
Intelligent Key as long as key IDs are different.
How to Change Door Lock and Unlock Function Operation Mode
Door lock and unlock function (door request switch) operation mode can be changed using CONSULT.
Refer to
DLK-75, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY) (With Super Lock)"
ANTI-HIJACK FUNCTION
Information of super lock system with anti-hijack function.
Refer to
DLK-46, "SUPER LOCK FUNCTION : System Description"
.
REMINDER FUNCTION (DOOR REQUEST SWITCH)
When doors are locked or unlocked by door request switch, BCM blinks hazard warning lamps as a reminder.
Reminder function does not operate if ignition switch in ON position.
How to Change Reminder Function Operation Mode
With CONSULT
Reminder function operation mode can be changed using CONSULT.
Refer to
DLK-75, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY) (With Super Lock)"
AUTO DOOR LOCK FUNCTION (DOOR REQUEST SWITCH)
After door is unlocked by door request switch operation and if 30 seconds or more passes without performing
the following operation, all doors are automatically locked. However, operation check function does not acti-
vate.
How to Change Auto Door Lock Function Operation Time
With CONSULT
Auto door lock function operation time can be changed using CONSULT.
Refer to
DLK-75, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY) (With Super Lock)"
DOOR LOCK STATUS INDICATOR OPERATION
• Door lock status indicator turns indicator lamp ON or OFF and indicates door lock or unlock state.
• For door lock status indicator operation, refer to
.
OUTSIDE KEY ANTENNA DETECTION AREA
Each door request switch operation
Operation condition
Lock
• All doors are closed
• Ignition switch is in the OFF position
• P position warning is not activated
• Intelligent Key is outside the vehicle
• Intelligent Key is within outside key antenna detection area
Unlock
• All doors are closed
• Ignition switch is in the OFF position
• Intelligent Key is outside the vehicle
• Intelligent Key is within outside key antenna detection area *
Door lock operation
(With door request switch)
Hazard warning lamp blink
Lock
Once
Unlock (all door unlock)
Twice
Unlock (anti-hijack operation)
Twice (quick)
Operating condition
• Door switch is ON (each door is open)
• BCM receives door lock signal
• Push switch is pressed
DLK-44
< SYSTEM DESCRIPTION >
[TYPE 1]
SYSTEM (INTELLIGENT KEY SYSTEM)
The outside key antenna detection area of door lock/unlock function
is in the range of approximately 80 cm (31.50 in) surrounding the
driver outside door handle, passenger outside door handle
and
back door request switch
. However, this operating range depends
on the ambient conditions.
LIST OF OPERATION RELATED PARTS
Parts marked with
×
are the parts related to operation.
BACK DOOR OPEN FUNCTION
BACK DOOR OPEN FUNCTION : System Description
INFOID:0000000010708038
SYSTEM DIAGRAM
BACK DOOR OPEN FUNCTION
• When the BCM detects that back door opener switch is pressed, it activates the outside key antenna (rear
bumper) and inside key antenna and transmits the request signal to the Intelligent Key. And then, check that
the Intelligent Key is near the back door.
JMKIA1954ZZ
Function
In
te
llige
n
t Key
Re
mo
te
ke
yl
es
s en
try rec
e
iv
e
r
Do
or swit
ch
Do
or req
ues
t swit
ch
Do
or loc
k
ac
tu
ato
r
In
si
de
ke
y an
ten
n
a
Out
s
id
e ke
y a
n
ten
n
a
CA
N co
mm
un
ic
ati
o
n
s
y
s
tem
BC
M
Hazard warning
lamp
P
u
s
h
-b
utt
o
n
ig
nit
ion
s
w
itc
h
Combination meter
Door lock and unlock function (door request switch)
×
×
×
×
×
×
×
×
Anti-hijack function (door request switch)
×
×
×
×
×
×
×
×
Reminder function (door request switch)
×
×
×
×
Auto door lock function (door request switch)
×
×
×
×
×
×
JMKIB3642GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст