Nissan X-Trail 32. Instruction — part 2049
TM-154
< UNIT DISASSEMBLY AND ASSEMBLY >
[6MT: RS6F52A]
TRANSAXLE ASSEMBLY
SHAFT AND GEAR
Differential side oil seal
Clutch housing
Input shaft oil seal
Oil channel
Oil gutter A
Back-up lamp switch
Plunger
Gasket
Plug
Bore plug
Striking rod oil seal
Transaxle case
Oil gutter B
Filler plug
Air breather tube
Neutral position switch
Shift lever oil seal
Drain plug
Magnet
Oil seal lip
: N·m (kg-m, ft-lb)
: Always replace after every disassembly.
: Apply multi-purpose grease.
: Apply Genuine Liquid Gasket, Three Bond 1215 or an equivalent.
JSDIA6361GB
TRANSAXLE ASSEMBLY
TM-155
< UNIT DISASSEMBLY AND ASSEMBLY >
[6MT: RS6F52A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
CAUTION:
Apply gear oil to gears, shafts, synchronizers, and bearings when assembly.
Input shaft front bearing
Input shaft
3rd needle bearing
3rd input gear
3rd inner baulk ring
3rd synchronizer cone
3rd outer baulk ring
3rd-4th spread spring
3rd-4th shifting insert
3rd-4th synchronizer hub
4th baulk ring
3rd-4th coupling sleeve
4th input gear bushing
4th needle bearing
4th input gear
Thrust washer
5th input gear bushing
5th needle bearing
5th input gear
5th baulk ring
5th-6th spread spring
5th-6th shifting insert
5th-6th synchronizer hub
5th-6th coupling sleeve
6th baulk ring
6th input gear
6th needle bearing
6th input gear bushing
Snap ring
Input shaft rear bearing
Oil channel
Input shaft rear bearing adjusting
shim
: Always replace after every disassembly.
: Select with proper thickness.
: Replace the parts as a set.
JSDIA6366ZZ
TM-156
< UNIT DISASSEMBLY AND ASSEMBLY >
[6MT: RS6F52A]
TRANSAXLE ASSEMBLY
CAUTION:
Apply gear oil to gears, shafts, synchronizers, and bearings when assembly.
Mainshaft front bearing
Mainshaft bearing retainer
Mainshaft
Reverse main gear
1st main gear
1st main gear bushing
1st needle bearing
1st inner baulk ring
1st synchronizer cone
1st outer baulk ring
1st-2nd spread spring
1st-2nd shifting insert
1st-2nd synchronizer hub
2nd outer baulk ring
2nd synchronizer cone
2nd inner baulk ring
1st-2nd coupling sleeve
2nd main gear bushing
2nd needle bearing
2nd main gear
3rd main gear
3rd-4th mainshaft spacer
4th main gear adjusting shim
4th main gear
5th main gear
5th-6th mainshaft spacer
6th main gear
6th main gear adjusting shim
Mainshaft rear bearing
Mainshaft C-ring
C-ring holder
Snap ring
Mainshaft rear bearing adjusting
shim
: N·m (kg-m, in-lb)
: Always replace after every disassembly.
: Select with proper thickness.
: Replace the parts as a set.
PCIB1889E
TRANSAXLE ASSEMBLY
TM-157
< UNIT DISASSEMBLY AND ASSEMBLY >
[6MT: RS6F52A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
CAUTION:
Apply gear oil to gears, shafts, synchronizers, and bearings when assembly.
SHIFT FORK AND FORK ROD
Retaining pin
Reverse idler shaft
Thrust needle bearing
Reverse idler gear needle bearing
Reverse insert spring
Reverse idler gear (front)
Reverse baulk ring
Reverse coupling sleeve
Reverse idler gear (rear)
Reverse idler gear adjusting shim
: Always replace after every disassembly.
: Select with proper thickness.
: Replace the parts as a set.
JSDIA6367ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст