Nissan X-Trail 32. Instruction — part 84
BCS-52
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (BCM)
WORK SUPPORT
ACTIVE TEST
SIGNAL BUFFER
SIGNAL BUFFER : CONSULT Function (BCM - SIGNAL BUFFER)
INFOID:0000000010688605
DATA MONITOR
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
KEY CYL SW-TR
NOTE:
This item is indicated, but not monitored.
SEN CANCEL SW
Indicates [ON/OFF] condition of sensor cancel switch.
RKE-LOCK
Indicates [ON/OFF] condition of LOCK signal from Keyfob.
RKE-UNLOCK
Indicates [ON/OFF] condition of UNLOCK signal from Keyfob.
RKE-TR/BD
NOTE:
This item is indicated, but not monitored.
KEY SW
Indicates [ON/OFF] condition of Key switch.
Monitored Item
Description
Service Item
Description
SECURITY ALARM SET
This mode is able to confirm and change vehicle security alarm ON-OFF setting.
SIREN SET
Select the siren function ON or OFF, and siren type.
• MODE 1: Without siren
• MODE 2: With siren
• MODE 3: With external complete protection (with siren)
• MODE 4: Without any external protection (with siren)
• MODE 5: Without external tilt protection (with siren)
Test Item
Description
SIREN
Activates the self-diagnosis function for siren control unit.
VEHICLE SECURITY HORN
NOTE:
This item is indicated, but not used
HEAD LAMP
NOTE:
This item is indicated, but not used
Monitor item [UNIT]
Description
PUSH SW
[Off/On]
Displays the status of the push-button ignition switch (push switch) judged by BCM.
BCS
BCM
BCS-53
< ECU DIAGNOSIS INFORMATION >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
ECU DIAGNOSIS INFORMATION
BCM
Reference Value
INFOID:0000000010688606
VALUES ON THE DIAGNOSIS TOOL
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
CONSULT MONITOR ITEM
Monitor Item
Condition
Value/Status
CONFRM ID ALL
The Intelligent Key ID that the NATS antenna amp. receives is not recog-
nized by any Intelligent Key ID registered to BCM.
Yet
The Intelligent Key ID that the NATS antenna amp. receives is recognized
by any Intelligent Key ID registered to BCM.
Done
CONFIRM ID4
The Intelligent Key ID that the NATS antenna amp. receives is not recog-
nized by the fourth Intelligent Key ID registered to BCM.
Yet
The Intelligent Key ID that the NATS antenna amp. receives is recognized
by the fourth Intelligent Key ID registered to BCM.
Done
CONFIRM ID3
The Intelligent Key ID that the NATS antenna amp. receives is not recog-
nized by the third Intelligent Key ID registered to BCM.
Yet
The Intelligent Key ID that the NATS antenna amp. receives is recognized
by the third Intelligent Key ID registered to BCM.
Done
CONFIRM ID2
The Intelligent Key ID that the NATS antenna amp. receives is not recog-
nized by the second Intelligent Key ID registered to BCM.
Yet
The Intelligent Key ID that the NATS antenna amp. receives is recognized
by the second Intelligent Key ID registered to BCM.
Done
CONFIRM ID1
The Intelligent Key ID that the NATS antenna amp. receives is not recog-
nized by the first Intelligent Key ID registered to BCM.
Yet
The Intelligent Key ID that the NATS antenna amp. receives is recognized
by the first Intelligent Key ID registered to BCM.
Done
NOT REGISTERED
BCM detects registered Intelligent Key ID, or BCM does not detect Intelli-
gent Key ID.
ID OK
BCM detects non-registration Intelligent Key ID.
ID NG
TP 4
The ID of fourth Intelligent Key is not registered to BCM
Yet
The ID of fourth Intelligent Key is registered to BCM
Done
TP 3
The ID of third Intelligent Key is not registered to BCM
Yet
The ID of third Intelligent Key is registered to BCM
Done
TP 2
The ID of second Intelligent Key is not registered to BCM
Yet
The ID of second Intelligent Key is registered to BCM
Done
TP 1
The ID of first Intelligent Key is not registered to BCM
Yet
The ID of first Intelligent Key is registered to BCM
Done
REQ SW -DR
Driver door request switch is not pressed
Off
Driver door request switch is pressed
On
REQ SW -AS
Passenger door request switch is not pressed
Off
Passenger door request switch is pressed
On
REQ SW -BD/TR
Trunk lid opener request switch is not pressed
Off
Trunk lid opener request switch is pressed
On
PUSH SW
Push-button ignition switch (push switch) is not pressed
Off
Push-button ignition switch (push switch) is pressed
On
BCS-54
< ECU DIAGNOSIS INFORMATION >
BCM
STARTER CUT RELAY
Other than engine cranking
Off
At engine cranking
On
DETECTION SENSOR (BK)
Hands free sensor is not detected.
Off
Hands free sensor is detected.
On
CLUCH SW
The clutch pedal is not depressed.
Off
The clutch pedal is depressed
On
BRAKE SW 1
The brake pedal is not depressed and ignition switch ON
Off
The brake pedal is depressed and ignition switch ON
On
BRAKE SW 2
The brake pedal is not depressed
Off
The brake pedal is depressed
On
DETE/CANCL SW
Selector lever in P position
Off
Selector lever in any position other than P
On
START CLUTCH SW
The clutch pedal is depressed
Off
The clutch pedal is not depressed
On
PUSH SW -IPDM
Push-button ignition switch (push-switch) is not pressed
Off
Push-button ignition switch (push-switch) is pressed
On
IGN RLY1 -F/B
Power position in OFF or ACC
Off
Power position in ON
On
NEUTRAL SW - IPDM
• Selector lever in any position other than P or N (CVT models)
• Control lever in any position other than neutral (M/T models)
Off
• Selector lever in P or N position (CVT models)
• Control lever in neutral position (M/T models)
On
SFT PN -IPDM
Selector lever in any position other than P or N
Off
Selector lever in P or N position
On
STARTER RELAY - IPDM
Other than engine cranking
Off
At engine cranking (short cranking)
Crank
Operation prohibited status
Invalid
At engine cranking
On
ENGINE STATE
Engine stopped
STOP
While the engine stalls
STALL
At engine cranking
CRANK
Engine running
RUN
ST/INHI RELAY - IPDM
Power position in OFF
Off, Off
Engine restart
Off, On
At engine cranking
INVALID
Engine running
On, On
REVERSE SIGNAL - IPDM
Selector lever in any position other than R position
Off
Selector lever in R position
On
CRANKING PERMIT - ECM
The engine start is prohibited
PRHBT
The engine start is permitted
PERMIT
When it is stopped requested during engine start
STOP
When not communication with ECM
Off
IS STATUS - ECM
Stop/start system not operating
Off
Stop/start system operating
On
Monitor Item
Condition
Value/Status
BCS
BCM
BCS-55
< ECU DIAGNOSIS INFORMATION >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
STARTER CUT RELAY - ECM
Other than engine cranking
Off
At engine cranking
On
VEH SPEED 1
While driving
Equivalent to speed-
ometer reading
VEH SPEED 2
While driving
Equivalent to speed-
ometer reading
IGN REQ - IPDM
Power position in OFF or ACC
Off
Power position in ON
On
STARTER REQ - IPDM
Other than engine cranking
Off
At engine cranking
On
DOOR STAT-DR
Driver door is locked
LOCK
Driver door is unlocked
UNLOCK
DOOR STAT-AS
Passenger door is locked
LOCK
Passenger door is unlocked
UNLOCK
DOOR STAT-RR
Rear door RH is locked
LOCK
Rear door RH is unlocked
UNLOCK
DOOR STAT-RL
Rear door LH is locked
LOCK
Rear door LH is unlocked
UNLOCK
BK DOOR STATE
Back door is locked
LOCK
Back door is unlocked
UNLOCK
ID OK FLAG
Steering is locked
Reset
Steering is unlocked
Set
PRMT ENG STRT
When the engine start is prohibited
Reset
When the engine start is permitted
Set
PRMT RKE STRT
NOTE:
The item is indicated, but not monitored.
Reset
I-KEY OK FLAG
Intelligent Key ID and Intelligent Key is detected outside vehicle
NOT On
Intelligent Key ID and Intelligent Key is detected inside vehicle
KEY On
PRBT ENG STRT
Not activated fail safe function
Reset
Engine start is prohibited by fail safe function
SET
ID AUTHENT CANCEL TIMER
Engine start is prohibited without Intelligent Key
STOP
Engine start is permitted without Intelligent Key
OPRAT
ACC BATTERY SAVER
ACC battery saver timer is stop
STOP
ACC battery saver timer is running
OPRAT
CRNK PRBT TMR
Cranking is permitted
Off
Cranking is prohibited
On
AUT CRANK TMR
Not auto cranking
Off
During auto cranking
On
CRNK PRBT TME
Cranking prohibit timer
sec
AUT CRANK TMR
Auto cranking timer
sec
CRANKING TME
Cranking timer
sec
SHORT CRANK
NOTE:
The item is indicated, but not monitored.
—
RKE OPE COUN1
During the operation of the Intelligent Key
Operation frequency
of the Intelligent Key
Monitor Item
Condition
Value/Status
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст