Nissan X-Trail 32. Instruction — part 250
LOCATION OF PLASTIC PARTS
BRM-161
< SERVICE DATA AND SPECIFICATIONS (SDS)
[FOR EUROPE (RHD)]
C
D
E
F
G
H
I
J
L
M
A
B
BRM
N
O
P
Component
Material
Component
Material
Side luggage finisher
PP
Cluster lid C
PC + ABS
Personal lamp
Lens
PC
Glove box
PP
Housing
PP
Lower side panel
PP + EPM
Center pillar garnish
PP
Finisher
PC + ABS
Map lamp
Switch finisher
PP
Instruction A/C
Switch
PC
Console
PP
Case
ABS
Lid box
PC + ABS
A/C Control
Finisher
PC + ABS
Front pillar garnish
PP
Automatic
A/C
Switch
PC
Cluster lid A
PP
Case
PC + ABS
Center ventilator grille
PC + ABS
Lens
PC
Instrument panel
Skin
TPO
Center console
Body
PP
Pad
PUR
Console box
PP
Core
PP + EPDM
A/T console
finisher
PC + ABS
JSKIA3819ZZ
BRM-162
< VEHICLE INFORMATION >
[FOR RUSSIA]
BODY EXTERIOR PAINT COLOR
VEHICLE INFORMATION
BODY EXTERIOR PAINT COLOR
Body Exterior Paint Color
INFOID:0000000010843595
NOTE:
• 2M: 2-Coat Metallic
• 2P: 2-Coat pearl
• 2S: 2-Coat solid
• 3P: 3-Coat pearl
• 2PM: 2-Coat Pearl metallic
Component
Color code
BAX6
BEAN
BEAR
BG41
BK23
BKAD
BQAB
BRAQ
Description
Red
Dark Ol-
ive
Orange
Black
Silver
Gray
White
Dark
Blue
Paint type
note
2S
2PM
2PM
2P
2M
2M
3P
2M
Hard clear
coat
×
×
×
×
–
–
–
×
Door mirror cover
Body color
BAX6
BEAN
BEAR
BG41
BK23
BKAD
BQAB
BRAQ
Front grille
Chromium
plate
Cr
Cr
Cr
Cr
Cr
Cr
Cr
Cr
Bumper fascia
Body color
BAX6
BEAN
BEAR
BG41
BK23
BKAD
BQAB
BRAQ
Fillet molding
Material color
–
–
–
–
–
–
–
–
Door outside handle
Chromium
plate
Cr
Cr
Cr
Cr
Cr
Cr
Cr
Cr
Rear spoiler (Side)
Black
G01
G01
G01
G01
G01
G01
G01
G01
Rear spoiler (Upper)
Body color
BAX6
BEAN
BEAR
BG41
BK23
BKAD
BQAB
BRAQ
Back door finisher
Chromium
plate
Cr
Cr
Cr
Cr
Cr
Cr
Cr
Cr
Back door
Body color
BAX6
BEAN
BEAR
BG41
BK23
BKAD
BQAB
BRAQ
Sill cover
Material color
–
–
–
–
–
–
–
–
Side guard molding
Material color
–
–
–
–
–
–
–
–
JSKIA4358ZZ
PRECAUTIONS
BRM-163
< PRECAUTION >
[FOR RUSSIA]
C
D
E
F
G
H
I
J
L
M
A
B
BRM
N
O
P
PRECAUTION
PRECAUTIONS
Precautions for Removing Battery Terminal
INFOID:0000000010843596
• With the adoption of Auto ACC function, ACC power is automatically supplied by operating the intelligent key
or remote keyless entry or by opening/closing the driver side door. In addition, ACC power is supplied even
after the ignition switch is turned to the OFF position, i.e. ACC power is supplied for a certain fixed time.
• When disconnecting the 12V battery terminal, turn off the ACC
power before disconnecting the 12V battery terminal, observing
“How to disconnect 12V battery terminal” described below.
NOTE:
Some ECUs operate for a certain fixed time even after ignition
switch is turned OFF and ignition power supply is stopped. If the
battery terminal is disconnected before ECU stops, accidental DTC
detection or ECU data damage may occur.
• For vehicles with the 2-batteries, be sure to connect the main bat-
tery and the sub battery before turning ON the ignition switch.
NOTE:
If the ignition switch is turned ON with any one of the terminals of
main battery and sub battery disconnected, then DTC may be detected.
• After installing the 12V battery, always check "Self Diagnosis Result" of all ECUs and erase DTC.
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to Instruction 1 or Instruction 2 described below.
For vehicles parked by ignition switch OFF, refer to Instruction 2.
INSTRUCTION 1
1.
Open the hood.
2.
Turn key switch to the OFF position with the driver side door opened.
3.
Get out of the vehicle and close the driver side door.
4.
Wait at least 3 minutes. For vehicle with the engine listed below, remove the battery terminal after a lapse
of the specified time.
CAUTION:
While waiting, never operate the vehicle such as locking, opening, and closing doors. Violation of
this caution results in the activation of ACC power supply according to the Auto ACC function.
5.
Remove 12V battery terminal.
CAUTION:
After installing 12V battery, always check self-diagnosis results of all ECUs and erase DTC.
INSTRUCTION 2 (FOR VEHICLES PARKED BY IGNITION SWITCH OFF)
1.
Unlock the door with intelligent key or remote keyless entry.
NOTE:
At this moment, ACC power is supplied.
2.
Open the driver side door.
3.
Open the hood.
4.
Close the driver side door.
5.
Wait at least 3 minutes.
SEF289H
D4D engine
: 20 minutes
HRA2DDT
: 12 minutes
K9K engine
: 4 minutes
M9R engine
: 4 minutes
R9M engine
: 4 minutes
V9X engine
: 4 minutes
BRM-164
< PRECAUTION >
[FOR RUSSIA]
PRECAUTIONS
CAUTION:
While waiting, never operate the vehicle such as locking, opening, and closing doors. Violation of
this caution results in the activation of ACC power supply according to the Auto ACC function.
6.
Remove 12V battery terminal.
CAUTION:
After installing 12V battery, always check self-diagnosis results of all ECUs and erase DTC.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст