Nissan X-Trail 32. Instruction — part 1577
INSIDE MIRROR
MIR-23
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
REMOVAL AND INSTALLATION
INSIDE MIRROR
Exploded View
INFOID:0000000011008297
AUTO ANTI-DAZZLING
With front camera unit
JMLIA5420GB
Inside mirror base
Inside mirror assembly
Camera/sensor cover
: Pawl
: Metal clip
: Always replace after every disassembly.
: N·m (kg-m, in-lb)
: Indicates that the part is connected at points with same symbol in actual vehicle.
MIR-24
< REMOVAL AND INSTALLATION >
INSIDE MIRROR
Without front camera unit
MANUAL ANTI-DAZZLING
JMLIA5390GB
Inside mirror base
Inside mirror assembly
Rain sensor cover
: Pawl
: Always replace after every disassembly.
: N·m (kg-m, in-lb)
INSIDE MIRROR
MIR-25
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
MIR
N
O
P
Removal and Installation
INFOID:0000000011008298
REMOVAL
CAUTION:
• Never damage the windshield glass.
• Replace inside mirror assembly with a new part after removal. Never reuse inside mirror assembly.
Auto Anti-Dazzling
1.
Remove Camera/sensor cover (with front camera unit). Refer to
DAS-149, "Removal and Installation"
Rain sensor cover (without front camera unit). Refer to
WW-109, "Removal and Installation"
.
2.
Disconnect inside mirror harness connector
.
Inside mirror base
Inside mirror assembly
: Pawl
: Always replace after every disassembly.
JMLIA4638ZZ
JMLIA4327ZZ
MIR-26
< REMOVAL AND INSTALLATION >
INSIDE MIRROR
3.
Remove inside mirror assembly fixing TORX bolt
.
4.
Remove inside mirror assembly as shown by the arrow in the
figure.
CAUTION:
Never use excessive force to remove the inside mirror
assembly because it is inserted tightly into the inside mir-
ror base.
Instruction Anti-Dazzling
Disengage inside mirror assembly
fixing pawl using a remover
tool (A), and then remove inside mirror assembly.
CAUTION:
• Use a remover tool wrapped in tape.
• Never use excessive force to remove the inside mirror assem-
bly because it is inserted tightly into the inside mirror base.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• Replace inside mirror assembly with a new part after removal. Never reuse inside mirror assembly.
• Tighten inside mirror assembly fixing TORX bolt to the specified torque. Refer to
JMLIA4330ZZ
JMLIA4331ZZ
JMLIA4291ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст