Nissan X-Trail 32. Instruction — part 428
SYSTEM (INTELLIGENT KEY SYSTEM)
DLK-53
< SYSTEM DESCRIPTION >
[TYPE 1]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
• Shift position: Other than P position
• Registered Intelligent Key is not detected inside the vehicle.
• When BCM receives Intelligent Key button operation via remote keyless entry receiver.
• When BCM receives door request switch signal from door request switch.
• After 15 seconds are passed since the engine start information is displayed.
When Ignition Switch is Turned From ON to OFF.
• After several seconds are passed since the engine start information is displayed.
INFORMATION DISPLAY (COMBINATION METER) : Intelligent Key Low Battery
Warning
INFOID:0000000010708043
DESIGN/PURPOSE
Information display warns the driver that Intelligent Key battery level is low.
NOTE:
Information display does not display when Intelligent Key battery is discharged.
SYNCHRONIZATION WITH MASTER WARNING LAMP
No applicable
SYSTEM DIAGRAM
SIGNAL PATH
• When Intelligent Key receives request signal from inside key antenna or outside key antenna, transmits key
ID signal is transmitted from Intelligent Key to remote keyless entry receiver.
• BCM receives key ID signal via remote keyless entry receiver and detects that Intelligent Key battery level is
low.
• When BCM detects that ignition switch is ON, meter display signal is transmitted by BCM to combination
meter via CAN communication.
• When combination meter receives meter display signal, Intelligent Key low battery warning displays.
WARNING/INDICATOR OPERATIONG CONDITION
Symbol
Message
Key Battery Low
JMKIB1397ZZ
JMKIB3597GB
DLK-54
< SYSTEM DESCRIPTION >
[TYPE 1]
SYSTEM (INTELLIGENT KEY SYSTEM)
When all of the following conditions are satisfied.
• Ignition switch is in ON position.
• Intelligent Key battery level is low.
WARNING/INDICATOR CANCEL CONDITION
When any of the following conditions are satisfied.
• After 30 seconds are passed since the Intelligent Key low battery warning is displayed
• Ignition switch is in a position other than ON.
• When Intelligent Key backside is contacted to push-button ignition switch while brake pedal is depressed.
TIMING CHART
INFORMATION DISPLAY (COMBINATION METER) : Intelligent Key System Malfunc-
tion
INFOID:0000000010708044
DESIGN/PURPOSE
Information display warns the driver that Intelligent Key system malfunctions or that engine cannot be started.
SYNCHRONIZATION WITH MASTER WARNING LAMP
Synchronization is applied.
Refer to
MWI-47, "WARNING LAMPS/INDICATOR LAMPS : Master Warning Lamp"
JMKIB1406GB
Symbol
Message
Key System Error
See Owner’s Instruction
JMKIB1398ZZ
SYSTEM (INTELLIGENT KEY SYSTEM)
DLK-55
< SYSTEM DESCRIPTION >
[TYPE 1]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
SYSTEM DIAGRAM
SIGNAL PATH
• When BCM detects that Intelligent Key system malfunctions or that the engine cannot be started, meter dis-
play signal is transmitted by BCM to combination meter via CAN communication.
• When combination meter receives meter display signal, Intelligent Key system malfunction displays.
WARNING/INDICATOR OPERATING CONDITION
When any of the following conditions are satisfied.
• The engine cannot be started.
• Intelligent Key system malfunction is detected.
WARNING/INDICATOR CANCEL CONDITION
When any of the following conditions are satisfied.
• Intelligent Key system malfunction or engine non-start status is resolved.
• Ignition switch is turned to LOCK or OFF, and 15 seconds are passed.
TIMING CHART
INFORMATION DISPLAY (COMBINATION METER) : Key ID Verification Information
INFOID:0000000010708045
DESIGN/PURPOSE
If the system cannot detect a registered Intelligent Key inside the vehicle, it informs the driver that it is neces-
sary for the vehicle to detect a registered Intelligent Key.
SYNCHRONIZATION WITH MASTER WARNING LAMP
No applicable
JMKIB1417GB
JMKIB1418GB
Symbol
Message
–
JMKIB1887ZZ
DLK-56
< SYSTEM DESCRIPTION >
[TYPE 1]
SYSTEM (INTELLIGENT KEY SYSTEM)
SYSTEM DIAGRAM
SIGNAL PATH
• BCM activates inside key antenna and checks that Intelligent Key is in vehicle, when push-button ignition
switch operation is performed while ignition switch position is LOCK.
• When BCM does not detect a registered Intelligent Key in vehicle, meter display signal is transmitted by
BCM to combination meter via CAN communication.
• When combination meter receives meter display signal, key ID warning displays.
• After 5 seconds are passed since the key ID warning is displayed, key ID verification information displays.
WARNING/INDICATOR OPERATIONG CONDITION
When all of the following conditions are satisfied.
• Ignition switch: LOCK position
• Push-button ignition switch operation is performed.
• Registered Intelligent Key is not detected inside the vehicle.
WARNING/INDICATOR CANCEL CONDITION
When any of the following conditions are satisfied.
• After 25 seconds are passed since the key ID verification information is displayed.
• When all door is locked with Intelligent Key or door request switch
• Lock the doors after all doors are closed
• When Intelligent Key backside is contacted to push-button ignition switch while brake pedal is depressed.
INFORMATION DISPLAY (COMBINATION METER) : Key ID Warning
INFOID:0000000010708046
DESIGN/PURPOSE
Information display warns the driver that Intelligent Key is not detected in vehicle.
SYNCHRONIZATION WITH MASTER WARNING LAMP
Synchronization is applied.
Refer to
MWI-47, "WARNING LAMPS/INDICATOR LAMPS : Master Warning Lamp"
JMKIB3598GB
Symbol
Message
Key ID Incorrect
JMKIB1398ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст