Nissan X-Trail 32. Instruction — part 45
AV-172
< DTC/CIRCUIT DIAGNOSIS >
[WITH NAVIGATION]
C1A39 STEERING ANGLE SENSOR
C1A39 STEERING ANGLE SENSOR
DTC Description
INFOID:0000000010714833
DTC DETECTION LOGIC
POSSIBLE CAUSE
Steering angle sensor
FAIL-SAFE
• DAA system is cancel
• BSW system is cancel
DTC CONFIRMATION PROCEDURE
1.
CHECK DTC PRIORITY
If DTC C1A39 is displayed with DTC U1000, first perform the confirmation procedure (trouble diagnosis) for
DTC U1000.
Is applicable DTC detected?
YES
>> Perform diagnosis of applicable. Refer to
AV-178, "AROUND VIEW MONITOR CONTROL UNIT :
.
NO
>> GO TO 2.
2.
PERFORM DTC CONFIRMATION PROCEDURE
1.
Turn the ignition switch ON.
2.
Turn the LDW system ON.
3.
Perform “All DTC Reading” with CONSULT.
4.
Check if the “C1A39” is detected as the current malfunction in “Self Diagnostic Result” of “AVM”.
Is “C1A39” detected as the current malfunction?
YES
>> Refer to
.
NO-1
>> To check malfunction symptom before repair: Refer to
GI-44, "Intermittent Incident"
.
NO-2
>> Confirmation after repair: INSPECTION END
Diagnosis Procedure
INFOID:0000000010714834
1.
CHECK SELF-DIAGNOSIS RESULTS
Check if “U1000” is detected other than “C1A39” in “Self Diagnostic Result” of “AVM”.
Is “U1000” detected?
YES
>> Perform the CAN communication system inspection. Repair or replace the malfunctioning parts.
NO
>> GO TO 2.
2.
CHECK ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) SELF-DIAGNOSIS RESULTS
Check if any DTC is detected in “Self Diagnostic Result” of “ABS”.
Is any DTC detected?
YES
>> Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to
.
NO
>> Replace the around view monitor control unit. Refer to
AV-268, "Removal and Installation"
DTC
Trouble diagnosis
(Trouble diagnosis contents)
Detecting condition
C1A39
STRG SEN CIR
(Steering angle sensor circuit)
If the steering angle sensor is malfunction
AV
C1B56 SONAR
AV-173
< DTC/CIRCUIT DIAGNOSIS >
[WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
C1B56 SONAR
DTC Description
INFOID:0000000010923280
DTC DETECTION LOGIC
POSSIBLE CAUSE
Sonar control unit
FAIL-SAFE
Around view monitor with Park Assist is cancel
DTC CONFIRMATION PROCEDURE
1.
PERFORM DTC CONFIRMATION PROCEDURE
WITH CONSULT.
1.
Perform “All DTC Reading” with CONSULT.
2.
Check if the “C1B56” is detected as the current malfunction in “Self Diagnostic Result” of “AVM”.
“C1B56” detected as the current malfunction?
YES
>> Refer to
.
NO-1
>> To check malfunction symptom before repair: Refer to
GI-44, "Intermittent Incident"
NO-2
>> Confirmation after repair: INSPECTION END
Diagnosis Procedure
INFOID:0000000010923281
1.
CHECK SELF-DIAGNOSIS RESULTS
With CONSULT.
Check if the “U1000” is detected other than “C1B56” in “Self Diagnostic Result” of “AVM”.
“U1000” detected?
YES
>> Perform the CAN communication system inspection. Repair or replace the malfunctioning parts.
AV-178, "AROUND VIEW MONITOR CONTROL UNIT : Diagnosis Procedure"
NO
>> GO TO 2.
2.
CHECK SELF-DIAGNOSIS RESULTS
With CONSULT.
Check if any DTC is detected in “Self Diagnostic Result” of “SONAR”.
Is any DTC detected?
YES
>> Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to
.
NO
>> Replace the around view monitor control unit. Refer to
AV-268, "Removal and Installation"
DTC
Trouble diagnosis
(Trouble diagnosis contents)
Detecting condition
C1B56
SONAR CIRC
(Sonar circuit)
The around view monitor control unit detects that sonar control unit has a mal-
function.
AV-174
< DTC/CIRCUIT DIAGNOSIS >
[WITH NAVIGATION]
U0122 ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
U0122 ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
DTC Description
INFOID:0000000010714835
DTC DETECTION LOGIC
POSSIBLE CAUSE
ABS actuator and electric unit (control unit)
FAIL-SAFE
• DAA system is cancel
• BSW system is cancel
• MOD (Moving Object Detection) function is cancel
• Around view monitor with Park Assist is cancel
DTC CONFIRMATION PROCEDURE
1.
CHECK DTC PRIORITY
If DTC U0122 is displayed with DTC U1000, first perform the confirmation procedure (trouble diagnosis) for
DTC U1000.
Is applicable DTC detected?
YES
>> Perform diagnosis of applicable. Refer to
AV-178, "AROUND VIEW MONITOR CONTROL UNIT :
.
NO
>> GO TO 2.
2.
PERFORM DTC CONFIRMATION PROCEDURE
1.
Start the engine.
2.
Turn the LDW system ON.
3.
Perform “All DTC Reading” with CONSULT.
4.
Check if the “U0122” is detected as the current malfunction in “Self Diagnostic Result” of “AVM”.
Is “U0122” detected as the current malfunction?
YES
>> Refer to
.
NO-1
>> To check malfunction symptom before repair: Refer to
GI-44, "Intermittent Incident"
.
NO-2
>> Confirmation after repair: INSPECTION END
Diagnosis Procedure
INFOID:0000000010714836
1.
CHECK SELF-DIAGNOSIS RESULTS
Check if “U1000” is detected other than “U0122” in “Self Diagnostic Result” of “AVM”.
Is “U1000” detected?
YES
>> Perform the CAN communication system inspection. Repair or replace the malfunctioning parts.
AV-178, "AROUND VIEW MONITOR CONTROL UNIT : Diagnosis Procedure"
NO
>> GO TO 2.
2.
CHECK ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) SELF-DIAGNOSIS RESULTS
Check if any DTC is detected in “Self Diagnostic Result” of “ABS”.
Is any DTC detected?
YES
>> Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to
.
NO
>> Replace the around view monitor control unit. Refer to
AV-268, "Removal and Installation"
DTC
Trouble diagnosis
(Trouble diagnosis contents)
Detecting condition
U0122
VDC P-RUN DIAGNOSIS
(VDC P-run diagnosis)
If around view monitor control unit detects an error signal that is re-
ceived from ABS actuator and electric unit (control unit) via CAN com-
munication
AV
U0416 ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
AV-175
< DTC/CIRCUIT DIAGNOSIS >
[WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
U0416 ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
DTC Description
INFOID:0000000010714837
DTC DETECTION LOGIC
POSSIBLE CAUSE
ABS actuator and electric unit (control unit)
FAIL-SAFE
• DAA system is cancel
• BSW system is cancel
• MOD (Moving Object Detection) function is cancel
• Around view monitor with Park Assist is cancel
DTC CONFIRMATION PROCEDURE
1.
CHECK DTC PRIORITY
If DTC U0416 is displayed with DTC U1000, first perform the confirmation procedure (trouble diagnosis) for
DTC U1000.
Is applicable DTC detected?
YES
>> Perform diagnosis of applicable. Refer to
AV-178, "AROUND VIEW MONITOR CONTROL UNIT :
NO
>> GO TO 2.
2.
PERFORM DTC CONFIRMATION PROCEDURE
1.
Start the engine.
2.
Turn the LDW system ON.
3.
Perform “All DTC Reading” with CONSULT.
4.
Check if the “U0416” is detected as the current malfunction in “Self Diagnostic Result” of “AVM”.
Is “U0416” detected as the current malfunction?
YES
>> Refer to
.
NO-1
>> To check malfunction symptom before repair: Refer to
GI-44, "Intermittent Incident"
NO-2
>> Confirmation after repair: INSPECTION END
Diagnosis Procedure
INFOID:0000000010714838
1.
CHECK SELF-DIAGNOSIS RESULTS
Check if “U1000” is detected other than “U0416” in “Self Diagnostic Result” of “AVM”.
Is “U1000” detected?
YES
>> Perform the CAN communication system inspection. Repair or replace the malfunctioning parts.
AV-178, "AROUND VIEW MONITOR CONTROL UNIT : Diagnosis Procedure"
NO
>> GO TO 2.
2.
CHECK ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) SELF-DIAGNOSIS RESULTS
Check if any DTC is detected in “Self Diagnostic Result” of “ABS”.
Is any DTC detected?
YES
>> Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to
NO
>> Replace the around view monitor control unit. Refer to
AV-268, "Removal and Installation"
DTC
Trouble diagnosis
(Trouble diagnosis contents)
Detecting condition
U0416
VDC CHECKSUM DIAGNOSIS
(VDC checksum diagnosis)
If around view monitor control unit detects an error signal that is re-
ceived from ABS actuator and electric unit (control unit) via CAN com-
munication
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст