Nissan Teana J32. Instruction — part 763
PRECAUTIONS
IP-9
< PRECAUTION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
• Keep removed parts protected with a shop cloth.
• If a clip is deformed or damaged, replace it.
• If an unreusable part is removed, replace it with a new one.
• Tighten bolts and nuts firmly to the specified torque.
• After reassembly has been completed, make sure each part functions correctly.
• Remove stains in the following way.
Water-soluble stains:
Dip a soft cloth in warm water, and then squeeze it tightly. After wiping the stain, wipe with a soft dry cloth.
Oil stain:
Dissolve a synthetic detergent in warm water (density of 2 to 3%), dip the cloth, then clean off the stain with
the cloth. Next, dip the cloth in fresh water and squeeze it tightly. Then clean off the detergent completely.
Then wipe the area with a soft dry cloth.
• Never use any organic solvent, such as thinner or benzine.
IP-10
< PREPARATION >
PREPARATION
PREPARATION
PREPARATION
Commercial Service Tools
INFOID:0000000003751417
Tool name
Description
Engine ear
Locates the noise
Remover tool
Removes clips, pawls and metal clips
SIIA0995E
PIIB7923J
INSTRUMENT PANEL ASSEMBLY
IP-11
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
ON-VEHICLE REPAIR
INSTRUMENT PANEL ASSEMBLY
Exploded View
INFOID:0000000003816777
JMJIA1891GB
IP-12
< ON-VEHICLE REPAIR >
INSTRUMENT PANEL ASSEMBLY
Removal and Installation
INFOID:0000000003816778
WORK STEP
When removing instrument panel assembly, combination meter, instrument finisher A, instrument finisher B,
AV C/U (audio unit) or center console assembly take steps in the order shown by the number below.
1.
Optical sensor
2.
Center speaker grille
3.
Sunload sensor
4.
Speaker grille LH
5.
Front squawker LH
6.
Instrument side finisher LH
7.
Side ventilator grille LH
8.
Combination meter
9.
Cluster lid A
10. Instrument lower panel LH
11.
Fuse block lid
12. Instrument finisher A
13. Steering column upper cover
14. Steering column lower cover
15. Instrument finisher D
16. Instrument finisher E
17. Glove box lid
18. Glove box assembly
19. Glove box damper
20. Illumination lamp
21. Front passenger air bag module
22. Side ventilator grille RH
23. Instrument side finisher RH
24. Instrument panel assembly
25. Front squawker RH
26. Speaker grille RH
27. Center speaker
28. Display unit
29. Cluster lid D
30. Cluster lid upper finisher
31. AV C/U (audio unit)
32. Instrument finisher B
33. Push button ignition switch
34. Cluster lid C
35. Cluster lid lower finisher
36. Socket and bulb
37. DVD player
38. Instrument side panel RH
39. Glove box mask
Refer to
for symbols in the figure.
PARTS
INSTRUMENT
PANEL
ASSEMBLY
COMBINATION
METER
INSTRUMENT
FINISHER A
INSTRUMENT
FINISHER B
AV C/U
(audio unit)
CENTER
CONSOLE
ASSEMBLY
Instrument finisher D
[1]
[1]
[1]
[1]
Instrument finisher E
[2]
[2]
[2]
Front body side welt LH
[3]
[2]
[1]
[1]
[3]
Front pillar garnish LH
[4]
Speaker grille LH
[5]
Front squawker LH
[6]
Instrument side finisher LH
[7]
[3]
[2]
[2]
[4]
Fuse block lid
[8]
[4]
[3]
[3]
[5]
Instrument lower panel LH
[9]
[5]
[4]
[4]
[6]
Instrument lower cover LH
[10]
[7]
Front body side welt RH
[11]
[5]
[8]
Front pillar garnish RH
[12]
Speaker grille RH
[13]
Front squawker RH
[14]
Instrument side finisher RH
[15]
[6]
[9]
Glove box assembly
[16]
[7]
[10]
DVD player
[17]
Instrument side panel RH
[18]
[8]
[11]
Instrument lower cover RH
[19]
[12]
Selector lever knob
[20]
[13]
Console switch panel
[21]
[14]
Console finisher assembly
[22]
[15]
Position indicator plate
[23]
[16]
Console rear finisher
[24]
[17]
Center console assembly
[25]
[18]
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст