Nissan Teana J32. Instruction — part 312
INTELLIGENT KEY SYSTEM
DLK-31
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
WARNING FUNCTION
WARNING FUNCTION : System Description
INFOID:0000000003794756
OPERATION DESCRIPTION
The warning function are as per the following and are given to the user as warning information and warnings
using combinations of Intelligent Key warning buzzer, KEY warning lamp, key slot illumination and information
display in combination meter.
• Intelligent Key system malfunction
• OFF position warning
• P position warning
• ACC warning
• Take away warning
• Door lock operation warning
• Key warning
• Intelligent Key insert information
• Engine start information
• Steering lock information
• Intelligent key low battery warning
• Key ID warning
OPERATION CONDITION
Once one of the following conditions below is established, alert or warning will be executed.
10. Inside key antenna (instrument cen-
ter) M105
11.
Inside key antenna (trunk room) B86 12. Outside key antenna (rear bumper)
D85
13. Front outside handle LH (request
switch) D11
14. Front outside handle LH
(outside key antenna) D12
15. Trunk lid lock assembly
(trunk lid opener actuator) T5
16. Front door switch (driver side) B34
A.
Behind the combination meter
B.
Engine room (LH)
C.
Behind the instrument lower panel
RH
D.
Behind the center console
E.
Behind the audio unit
F.
View with rear bumper removed
1.
Front door lock assembly (driver
side) D9
2.
Rear door lock assembly LH D85
3.
Trunk lid opener request switch T6
A.
View with front door finisher removed B.
View with rear door finisher removed C.
View with trunk lid
JMKIA2376ZZ
Warning/Information functions
Operation procedure
Intelligent Key system malfunction
When a malfunction is detected in BCM, “KEY” warning lamp will illuminate.
DLK-32
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
INTELLIGENT KEY SYSTEM
WARNING METHOD
The following table shows the alarm or warning methods with chime.
Information display (combination meter), “KEY” indicator or key slot illumination when the warning conditions
are met.
OFF position warning
For internal
• Ignition switch: ACC position.
• Door switch (driver side): ON (Door is open).
For external
OFF position warning (for internal) is in active mode, driver side door is closed.
NOTE:
OFF position (for external) active only when each of the sequence has oc-
curred as per the following: P position warning
→
ACC warning
→
OFF posi-
tion warning (for internal)
→
OFF position warning (for internal)
P position warning
• Shift position: Any position except the P position.
• Engine is running to stopped (ignition switch is ON to OFF).
ACC warning
• When P position warning is in active mode, shift position changes from the
P position.
• Ignition switch: ACC position.
Take away warning
Door is open to close
• Ignition switch: Any position except the LOCK position.
• Door switch: ON to OFF (door is open to close).
• Intelligent Key can not be detected inside the vehicle.
Door is open
• Door switch: ON (door is open).
• Key ID verification every 5 seconds when registered Intelligent Key can not
be detected inside the vehicle.
Push button-ignition
switch operation
• Ignition switch: Any position except the LOCK position.
• Press push-button ignition switch.
• Intelligent Key can not be detected inside the vehicle.
Intelligent Key is removed
from key slot
When Intelligent Key is removed from key slot, Intelligent Key can not be de-
tected inside the vehicle.
Door lock operation warn-
ing
Request switch operation
When request switch is pushed (lock operation) under the following conditions.
• All doors are closed.
• All doors are unlocked.
• Intelligent Key is inside vehicle.
Intelligent Key button op-
eration
When Intelligent Key button is pushed (lock operation) under the following con-
ditions.
• Door switch: ON (any door is open).
• For 3 seconds after Intelligent Key is removed from key slot.
Key warning
• Ignition switch is in the OFF position.
• Driver side door switch: ON (driver side door is open).
• Intelligent Key is inserted in key slot.
Intelligent Key insert information
• Door switch: ON to OFF (door is open to close).
• Ignition switch: OFF to ON position.
• Intelligent Key is out of key slot.
• Intelligent Key can not be detected inside the vehicle.
Engine start information
Ignition switch is in the
ON position
• Ignition switch: ON position.
• Shift position: P position.
• Engine is stopped.
Ignition switch is in any
position except the ON
position
• Ignition switch: Any position except the ON position.
• Shift position: P position.
• Intelligent Key is inserted in key slot or Intelligent Key can be detected inside
the vehicle.
Steering lock information
When steering lock can not be released after ignition switch is turned ON.
Intelligent Key low battery warning
When Intelligent Key is battery low, BCM is detected after ignition switch is
turned ON.
Key ID warning
When registered Intelligent Key can not be detected inside the vehicle after ig-
nition switch is turned ON.
Warning/Information functions
Operation procedure
INTELLIGENT KEY SYSTEM
DLK-33
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Warning/Information functions
“KEY” warn-
ing lamp
Information display
(combination meter)
Key slot il-
lumination
Warning chime
Combination
meter buzzer
Intelligent
Key warning
buzzer
Intelligent Key system malfunction
Illuminate
—
—
—
—
OFF position warn-
ing
For internal
—
—
—
Activate
—
For external
—
—
—
—
Activate
P position warning
—
—
Activate
—
ACC warning
—
—
—
—
Take away warning
Door is open to
close
—
Blink
Activate
Activate
Door is open
—
Flash
—
—
Push-ignition
switch operation
—
Flash
Activate
—
Intelligent Key is
removed from
key slot
—
Flash
—
—
Door lock operation
warning
Request switch
operation
—
—
—
—
Activate
Intelligent Key
operation
—
—
—
—
Activate
Key ID warning
—
—
—
—
Key warning
—
Flash
Activate
—
JMKIA0037GB
JMKIA0047GB
JMKIA0036GB
JMKIA0036GB
JMKIA0035GB
DLK-34
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
INTELLIGENT KEY SYSTEM
LIST OF OPERATION RELATED PARTS
Parts marked with
×
are the parts related to operation.
Intelligent Key insert information
—
Flash
—
—
Engine start information
—
—
—
—
Steering lock information
—
—
—
—
Intelligent Key low battery warning
—
—
—
—
Warning/Information functions
“KEY” warn-
ing lamp
Information display
(combination meter)
Key slot il-
lumination
Warning chime
Combination
meter buzzer
Intelligent
Key warning
buzzer
JMKIA0034GB
JMKIA0032GB
JMKIA0033GB
JMKIA0048GB
Warning function
In
te
lli
ge
nt Key
Ke
y sl
ot
Ig
ni
tio
n
swit
ch
Doo
r swi
tch
Do
or re
qu
es
t s
w
itc
h
Insi
d
e
ke
y a
n
ten
n
a
Out
s
id
e k
e
y a
n
te
nn
a
In
te
lli
ge
nt
Key
warn
in
g b
u
z
z
e
r
Com
b
in
at
io
n
m
e
te
r wa
rni
n
g bu
zz
er
CAN c
o
m
m
u
n
ica
ti
on
sy
st
em
BCM
Co
mb
ina
ti
on me
te
r
di
sp
lay
Ke
y sl
ot ill
um
ina
tio
n
Park
p
o
s
iti
on
swi
tch
“KE
Y
” warning lamp
Intelligent Key system malfunction
×
×
×
OFF position warning
For internal
×
×
×
×
For external
×
×
×
P position warning
×
×
×
×
×
×
ACC warning
×
×
×
×
×
×
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст