Nissan Teana J32. Instruction — part 87
AV
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
AV-203
< FUNCTION DIAGNOSIS >
[BOSE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
When either one of the following
items is detected:
• BOSE amp. malfunction is detected.
• sound signal circuits between BOSE
amp. and each speaker is malfunc-
tioning.
• Replace BOSE amp.
• Malfunctioning speaker circuits
When either one of the following
items is detected:
• DVD player power supply and
ground circuits are malfunctioning.
• AV communication circuits between
BOSE amp. and DVD player are
malfunctioning.
• AV communication signal between
AV control unit and DVD player is
malfunctioning.
• DVD player power supply and
ground circuits
• AV communication circuits between
BOSE amp. and DVD player
When either one of the following
items is detected:
• BOSE amp. power supply and
ground circuits are malfunctioning.
• AV communication signal between
AV control unit and BOSE amp. is
malfunctioning.
BOSE amp. power supply and ground
circuits
Camera connection recognition signal
circuit is detected.
Camera connection recognition signal
circuit
Area with yellow connection lines
Description
Possible malfunction location / Action
to take
JPNIA1092GB
JSNIA1327GB
JSNIA1328GB
JSNIA1329GB
AV-204
< FUNCTION DIAGNOSIS >
[BOSE AUDIO WITHOUT NAVIGATION]
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
CONFIRMATION/ADJUSTMENT MODE
1.
Start the diagnosis function and select “Confirmation/Adjustment”. The confirmation/adjustment mode
indicates where each item can be checked or adjusted.
2.
Select each switch on the “Confirmation/Adjustment Mode”
screen to display the relevant trouble diagnosis screen. Press
the “BACK” switch to return to the initial Confirmation/Adjust-
ment Mode screen.
When either one of the following
items is detected:
• rear control switch power supply and
ground circuits are malfunctioning.
• AV communication signal between
AV control unit and rear control
switch is malfunctioning.
Rear control switch power supply and
ground circuits
With rear control switch
When either one of the following
items is detected:
• malfunction is detected in AV com-
munication circuits between rear
control switch and camera control
unit.
• malfunction is detected in AV com-
munication circuits between camera
control unit and BOSE amp.
• AV communication circuits between
rear control switch and camera con-
trol unit
• AV communication circuits between
camera control unit and BOSE amp.
Without rear control switch
When either one of the following
items is detected:
• malfunction is detected in AV com-
munication circuits between multi-
function switch and camera control
unit.
• malfunction is detected in AV com-
munication circuits between camera
control unit and BOSE amp.
• AV communication circuits between
multifunction switch and camera
control unit
• AV communication circuits between
camera control unit and BOSE amp.
Malfunction is detected in AV commu-
nication circuits between AV control
unit and multifunction switch.
AV communication circuits between
AV control unit and multifunction
switch
Area with yellow connection lines
Description
Possible malfunction location / Action
to take
JSNIA1330GB
JSNIA1331GB
JSNIA1332GB
JSNIA0147GB
AV
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
AV-205
< FUNCTION DIAGNOSIS >
[BOSE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
Display Diagnosis
The tint of the color bar indication is as per the following list if RGB signal error is detected.
Vehicle Signals
A comparison check can be made of each actual vehicle signal and
the signals recognized by the system.
Speaker Test
JSNIA0688GB
R (red) signal error
: Light blue (Cyan) tint
G (green) signal error
: Purple (Magenta) tint
B (blue) signal error
: Yellow tint
JSNIA0149GB
Diagnosis item
Display
Vehicle status
Remarks
Vehicle speed
ON
Vehicle speed > 0 km/h (0 MPH)
Changes in indication may be delayed by approximately
1.5 seconds. This is normal.
OFF
Vehicle speed = 0 km/h (0 MPH)
Parking brake
ON
Parking brake is applied.
OFF
Parking brake is released.
Lights
ON
Light switch ON
Block the light beam from the auto light optical sensor.
OFF
Light switch OFF
Ignition
ON
Ignition switch ON
—
OFF
Ignition switch in ACC position
Reverse
ON
Shift the selector lever to “R” posi-
tion
Changes in indication may be delayed by approximately
1.5 seconds. This is normal.
OFF
Shift the selector lever other than
“R” position
AV-206
< FUNCTION DIAGNOSIS >
[BOSE AUDIO WITHOUT NAVIGATION]
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
Select “SPEAKER DIAGNOSIS” to display the Speaker Diagnosis
screen. Press “START and NEXT” to generate a test tone in a
speaker. Press “Start” to generate a test tone in the next speaker.
Press “End” to stop the test tones.
NOTE:
The frequency of test tone emitted from each speaker is as follows.
Climate Control
On-board self-diagnosis is not supported. Only CONSULT-III is supported.
Refer to
HAC-156, "WITHOUT INTELLIGENT AIR CONDITIONER SYSTEM : CONSULT-III Function"
for
details.
Camera Cont.
Error History
The self-diagnosis results are judged depending on whether any error occurs from when “Self-diagnosis” is
selected until the self-diagnosis results are displayed.
However, the diagnosis results are judged normal if an error has occurred before the ignition switch is turned
ON and then no error has occurred until the self-diagnosis start. Check the “Error Record” to detect any error
that may have occurred before the self-diagnosis start because of this situation.
The error record displays the time and place of the most recent occurrence of that error. However, take note of
the following points.
• Place of the error occurrence is represented by the position of the current location mark at the time an error
occurred. If current location mark has deviated from the correct position, then the place of the error occur-
rence cannot be located correctly.
• The frequency of occurrence is displayed in a count up manner. The actual count up method differs depend-
ing on the error item.
Count up method A
• The counter resets to 0 if an error occurs when IGN switch is turned ON. The counter increases by 1 if the
condition is normal at a next IGN ON cycle.
• The counter upper limit is 39. Any counts exceeding 39 are ignored.“ The counter can be reset (no error
record display) with the “Delete log” switch or CONSULT-III.
Count up method B
• The counter increases by 1 if an error occurs when IGN switch is ON. The counter will not decrease even if
the condition is normal at the next IGN ON cycle.
• The counter upper limit is 50. Any counts exceeding 50 are ignored. “ The counter can be reset (no error
record display) with the “Delete log” switch or CONSULT-III.
Squawker
: 3 kHz
Front speaker
: 300 Hz
Rear speaker
: 1 kHz
JSNIA0150GB
Display type of occur-
rence frequency
Error history display item
Count up method A
CAN communication line, control unit (CAN), AV communication line, control unit (AV communication)
Count up method B
Other than the above
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст