Nissan Teana J32. Instruction — part 50
AV
AUDIO SYSTEM
AV-55
< FUNCTION DIAGNOSIS >
[BASE AUDIO AND DISPLAY SYSTEM]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
Component Description
INFOID:0000000003791248
Part name
Description
AV CONTROL UNIT
• The AM/FM receiving function and the CD playing function are equipped.
• Sound signal is transmitted to each speaker.
DISPLAY UNIT
• Display image is controlled by the serial communication from AV control unit.
• RGB image signal (audio operation condition) is input from AV control unit.
FRONT SPEAKER
• Outputs sound signal from front speaker.
• Outputs sound (mid and low range).
REAR SPEAKER
• Outputs sound signal from rear speaker.
• Outputs sound (mid and low range).
FRONT SQUAWKER
• Outputs sound signal from front squawker.
• Outputs sound (high and mid range).
MULTIFUNCTION SWITCH
• Each audio operation can be operated.
• The multifunction switch is connected to the preset switch by wiring harness,
and it transmits the operation signal to the preset switch.
PRESET SWITCH
• Each audio operation can be operated.
• The preset switch is connected via AV communication, and it transmits the op-
eration signals of the preset switch and multifunction switch.
• The disk ejection operating signal is performed by hard-wire.
STEERING SWITCH
• Each audio operation can be operated.
• Steering switch signal (operation signal) is output to AV control unit.
REAR CONTROL SWITCH
• Each audio operation can be operated.
• The rear control switch is connected via AV communication, and it transmits
the operation signals of the rear control switch.
ANTENNA AMP.
• Radio signal received by glass antenna is amplified and transmitted to AV con-
trol unit.
• Power (antenna amp. ON signal) is supplied from AV control unit.
AV-56
< FUNCTION DIAGNOSIS >
[BASE AUDIO AND DISPLAY SYSTEM]
REAR VIEW MONITOR SYSTEM
REAR VIEW MONITOR SYSTEM
System Diagram
INFOID:0000000003882707
System Description
INFOID:0000000003882708
CAMERA IMAGE OPERATION PRINCIPLE
• Power is supplied to rear view camera from camera control unit and the rear view camera outputs the cam-
era image to camera control unit when selector lever is set to reverse position and the reverse signal on
camera control unit is input.
• Camera control unit superimposes the guiding line and predicted course line to the image from rear view
camera and outputs to display unit. In this case, the reverse signal is also input to AV control unit. Therefore,
AV control unit recognizes the selector lever as in the reverse position. And then AV control unit switches the
image displayed by the communication signal between AV control unit and display unit with the camera
image.
• AV control unit outputs camera image signal that is inputted from camera control unit to display unit.
• Camera control unit controls the direction and distance of predicted course line according to the sensor sig-
nal from steering angle sensor.
• AV control unit determines whether rear view camera is equipped or not, based on the presence of camera
connection recognition signal. It switches to rear view monitor image at the time of reverse signal input when
rear view camera is equipped.
Rear view monitor guiding line
JSNIA1379GB
JSNIA1325GB
AV
REAR VIEW MONITOR SYSTEM
AV-57
< FUNCTION DIAGNOSIS >
[BASE AUDIO AND DISPLAY SYSTEM]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
PREDICTED COURSE LINE OPERATION PRINCIPLE
Detection Of Steering Rotation Direction
Camera control unit detects the rotation direction of steering according to the phase difference of two pairs of
pulse signals (sensor signal 1 and sensor signal 2) input from steering angle sensor.
Detection Of Steering Neutral Position
The sensor signal 3 input from steering angle sensor is generated at 1 pulse per 1 rotation of the steering
wheel. Camera control unit detects the steering neutral position from this pulse.
Correction Of Steering Neutral Position
Camera control unit corrects the steering neutral position during driving according to the vehicle speed signal
and sensor signal.
JSNIA0708GB
AV-58
< FUNCTION DIAGNOSIS >
[BASE AUDIO AND DISPLAY SYSTEM]
REAR VIEW MONITOR SYSTEM
Component Parts Location
INFOID:0000000003885182
1.
Front squawker RH
2.
Front squawker LH
3.
Front door speaker LH
4.
Rear door speaker LH
5.
Rear control switch
6.
Rear view camera
7.
Camera control unit
8.
Antenna amp.
9.
Rear door speaker RH
10. Front door speaker RH
11. Steering angle sensor
12. Steering switch
13. AV control unit
14. Auxiliary input jacks
15. Preset switch
16. Multifunction switch
17. Display unit
A. Trunk room side RH
B.
Within rear pillar finisher RH
C.
Spiral cable part
D.
In center console
JSNIA1433ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст