Nissan Teana J32. Instruction — part 327
HORN FUNCTION
DLK-91
< COMPONENT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
HORN FUNCTION
Description
INFOID:0000000003794906
Perform answer-back for each operation with horn.
Component Function Check
INFOID:0000000003794907
1.
CHECK FUNCTION
1.
Select “HORN” in “ACTIVE TEST” mode with CONSULT-III.
2.
Check the horn (high/low) operation.
Is the operation normal?
YES
>> Horn function is OK.
NO
>> Go to
.
Diagnosis Procedure
INFOID:0000000003794908
1.
CHECK HORN FUNCTION
Check horn function with horn switch
Do the horns sound?
YES
>> GO TO 2.
NO
>> Go to
HRN-2, "Wiring Diagram - HORN -"
2.
CHECK HORN RELAY POWER SUPPLY
1.
Turn ignition switch ON.
2.
Perform “ACTIVE TEST” (“HORN”) with CONSULT-Ill.
3.
Check voltage between horn relayconnector and ground.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> GO TO 3.
3.
CHECK HORN RELAY CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect IPDM E/R connector and horn relay.
3.
Check continuity between IPDM E/R harness connector and horn relay connector.
4.
Check continuity between driver seat control unit harness connector and ground.
Is the inspection result normal?
Test item
Description
HORN
ON
Horn relay
ON (for 20 ms)
Horn relay
Ground
Test item
Voltage (V)
(Approx.)
Connector
Terminal
E5
1
HORN
ON
Battery voltage
→
0
→
Battery voltage
Other than above
Battery voltage
IPDM E/R
Horn relay
Continuity
Connector
Terminal
Connector
Terminal
E11
44
E5
1
Existed
IPDM E/R
Ground
Continuity
Connector
Terminal
E11
44
Not existed
DLK-92
< COMPONENT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
HORN FUNCTION
YES
>> Replace IPDM E/R. Refer to
PCS-34, "Removal and Installation"
NO
>> Repair or replace harness.
4.
CHECK INTERMITTENT INCIDENT
GI-35, "Intermittent Incident"
Is the inspection result normal?
>> INSPECTION END
COMBINATION METER DISPLAY FUNCTION
DLK-93
< COMPONENT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
COMBINATION METER DISPLAY FUNCTION
Description
INFOID:0000000003794909
Displays each operation method guide and warning for system malfunction.
Component Function Check
INFOID:0000000003794910
1.
CHECK FUNCTION
Check the operation with (“LCD”) in the Active Test.
Is the inspection result normal?
YES
>> Meter display is OK.
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000003794911
1.
CHECK COMBINATION METER
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Check combination meter. Refer to
.
2.
CHECK INTERMITTENT INCIDENT
GI-35, "Intermittent Incident"
.
>> INSPECTION END
Is each warning displayed on meter display?
DLK-94
< COMPONENT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
BUZZER (COMBINATION METER)
BUZZER (COMBINATION METER)
Description
INFOID:0000000003794912
Performs operation method guide and warning with buzzer.
Component Function Check
INFOID:0000000003794913
1.
CHECK FUNCTION
1.
Check the operation with “INSIDE BUZZER” in the Active Test.
2.
Touch “TAKE OUT”, “KNOB”or “KEY”on screen.
Is the inspection result normal?
Yes
>> Warning buzzer in combination meter is OK.
No
>> Refer to
.
Diagnosis Procedure
INFOID:0000000003794914
1.
CHECK METER BUZZER CIRCUIT
WCS-21, "Component Function Check"
.
Is the inspection result normal?
Yes
>> GO TO 2.
No
>> Repair or replace meter buzzer circuit.
2.
CHECK INTERMITTENT INCIDENT
GI-35, "Intermittent Incident"
>> INSPECTION END
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст