Nissan Teana J32. Instruction — part 295
BCM (BODY CONTROL MODULE)
DEF-29
< ECU DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
DEF
N
O
P
S/L UNLK-IPDM
Steering is unlocked
Off
Steering is locked
On
S/L RELAY-REQ
Ignition switch in OFF or ACC position
Off
Ignition switch in ON position
On
VEH SPEED 1
While driving
Equivalent to speedometer reading
VEH SPEED 2
While driving
Equivalent to speedometer reading
DOOR STAT-DR
Driver door is locked
LOCK
Wait with selective UNLOCK operation (5 seconds)
READY
Driver door is unlocked
UNLOCK
DOOR STAT-AS
Passenger door is locked
LOCK
Wait with selective UNLOCK operation (5 seconds)
READY
Passenger door is unlocked
UNLOCK
ID OK FLAG
Ignition switch in ACC or ON position
Reset
Ignition switch in OFF position
Set
PRMT ENG STRT
The engine start is prohibited
Reset
The engine start is permitted
Set
PRMT RKE STRT
NOTE:
The item is indicated, but not monitored.
Reset
KEY SW -SLOT
The key is not inserted into key slot
Off
The key is inserted into key slot
On
RKE OPE COUN1
During the operation of the key
Operation frequency of the key
RKE OPE COUN2
NOTE:
The item is indicated, but not monitored.
—
CONFRM ID ALL
The key ID that the key slot receives does not accord with any key
ID registered to BCM.
Yet
The key ID that the key slot receives accords with any key ID regis-
tered to BCM.
Done
CONFIRM ID4
The key ID that the key slot receives does not accord with the fourth
key ID registered to BCM.
Yet
The key ID that the key slot receives accords with the fourth key ID
registered to BCM.
Done
CONFIRM ID3
The key ID that the key slot receives does not accord with the third
key ID registered to BCM.
Yet
The key ID that the key slot receives accords with the third key ID
registered to BCM.
Done
CONFIRM ID2
The key ID that the key slot receives does not accord with the sec-
ond key ID registered to BCM.
Yet
The key ID that the key slot receives accords with the second key
ID registered to BCM.
Done
CONFIRM ID1
The key ID that the key slot receives does not accord with the first
key ID registered to BCM.
Yet
The key ID that the key slot receives accords with the first key ID
registered to BCM.
Done
TP 4
The ID of fourth key is not registered to BCM
Yet
The ID of fourth key is registered to BCM
Done
TP 3
The ID of third key is not registered to BCM
Yet
The ID of third key is registered to BCM
Done
Monitor Item
Condition
Value/Status
DEF-30
< ECU DIAGNOSIS >
BCM (BODY CONTROL MODULE)
TERMINAL LAYOUT
TP 2
The ID of second key is not registered to BCM
Yet
The ID of second key is registered to BCM
Done
TP 1
The ID of first key is not registered to BCM
Yet
The ID of first key is registered to BCM
Done
Monitor Item
Condition
Value/Status
JPMIA0062ZZ
BCM (BODY CONTROL MODULE)
DEF-31
< ECU DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
DEF
N
O
P
PHYSICAL VALUES
Terminal No.
(Wire color)
Description
Condition
Value
(Approx.)
Signal name
Input/
Output
+
–
1
(W/B)
Ground
Battery power sup-
ply
Input
Ignition switch OFF
Battery voltage
2
(R/Y)
Ground
P/W power supply
(BAT)
Output
Ignition switch OFF
Battery voltage
3
(L/W)
Ground
P/W power supply
(IGN)
Output
Ignition switch ON
Battery voltage
4
(P/W)
Ground
Interior room lamp
power supply
Output
Interior room lamp battery saver is activated.
(Cuts the interior room lamp power supply)
0 V
Interior room lamp battery saver is not activat-
ed.
(Outputs the interior room lamp power supply)
Battery voltage
5
(G/Y)
Ground
Passenger door
UNLOCK
Output
Passenger door
UNLOCK (Actuator is ac-
tivated)
Battery voltage
Other than UNLOCK (Ac-
tuator is not activated)
0 V
7
(R/W)
Ground
Step lamp
Output
Step lamp
ON
0 V
OFF
Battery voltage
8
(V)
Ground
All doors LOCK
Output
All doors
LOCK (Actuator is acti-
vated)
Battery voltage
Other than LOCK (Actua-
tor is not activated)
0 V
9
(G)
Ground
Driver door UN-
LOCK
Output
Driver door
UNLOCK (Actuator is ac-
tivated)
Battery voltage
Other than UNLOCK (Ac-
tuator is not activated)
0 V
10
(G/Y)
Ground
Rear RH door and
rear LH door UN-
LOCK
Output
Rear RH door
and rear LH door
UNLOCK (Actuator is ac-
tivated)
Battery voltage
Other than UNLOCK (Ac-
tuator is not activated)
0 V
11
(Y/R)
Ground
Battery power sup-
ply
Input
Ignition switch OFF
Battery voltage
13
(B)
Ground
Ground
—
Ignition switch ON
0 V
15
(Y)
Ground
ACC indicator lamp
Output
Ignition switch
OFF (LOCK indicator is
not illuminated)
Battery voltage
ACC or ON
0 V
17
(G/B)
Ground
Turn signal RH
(Front and door mir-
ror)
Output
Ignition switch
ON
Turn signal switch OFF
0 V
Turn signal switch RH
6.5 V
PKID0926E
DEF-32
< ECU DIAGNOSIS >
BCM (BODY CONTROL MODULE)
18
(G/Y)
Ground
Turn signal LH
(Front and door mir-
ror)
Output
Ignition switch
ON
Turn signal switch OFF
0 V
Turn signal switch LH
6.5 V
19
(Y)
Ground
Room lamp timer
control
Output
Interior room
lamp
OFF
Battery voltage
ON
0 V
20
(G/B)
Ground
Turn signal RH
(Rear)
Output
Ignition switch
ON
Turn signal switch OFF
0 V
Turn signal switch RH
6.5 V
23
(R)
Ground
Trunk lid opening
Output
Trunk lid
OPEN (Trunk lid opener
actuator is activated)
Battery voltage
Other than OPEN (Trunk
lid opener actuator is not
activated)
0 V
24
(G)
Ground
Rear fog lamp
Output
Rear fog lamp
OFF
0 V
ON
Battery voltage
25
(G/Y)
Ground
Turn signal LH
(Rear)
Output
Ignition switch
ON
Turn signal switch OFF
0 V
Turn signal switch LH
6.5 V
30
(V/W)
Ground
Trunk room lamp
Output
Trunk room lamp
OFF
0 V
ON
Battery voltage
Terminal No.
(Wire color)
Description
Condition
Value
(Approx.)
Signal name
Input/
Output
+
–
PKID0926E
PKID0926E
PKID0926E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст