Nissan Teana J32. Instruction — part 10
AUTOMATIC DRIVE POSITIONER SYSTEM
ADP-33
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
INTELLIGENT KEY INTERLOCK FUNCTION : Component Parts Location
INFOID:0000000003859815
1.
BCM M118, M119, M122, M123
2.
Combination meter M34
3.
Key slot M99
4.
Seat memory switch D13
5.
Front door switch (driver side) B34
6.
Reclining motor (driver side) B454
7.
Lifting motor (front) (driver side)
B455
8.
Driver seat control unit B451,B452
9.
Sliding motor (driver side) B461
JMJIA1811ZZ
ADP-34
< FUNCTION DIAGNOSIS >
AUTOMATIC DRIVE POSITIONER SYSTEM
INTELLIGENT KEY INTERLOCK FUNCTION : Component Description
INFOID:0000000003759091
CONTROL UNITS
10. Lifting motor (rear) (driver side) B456 11.
Power seat switch (driver side) B459
(sliding, lifting switch)
12. Power seat switch (driver side) B459
(reclining switch)
13. TCM (transmission control module)
F23
14. Control device (detention switch)
M57
15. ABS actuator and electric unit (con-
trol unit) E36
A.
Behind the combination meter
B.
View with seat cushion and seatback
pad removed
C.
Back side of the seat cushion
D.
Engine room (LH)
E.
View with the center console assem-
bly removed
F.
Engine room (RH)
Item
Function
Driver seat control unit
Performs memory function and entry/exit assist function after receiving the door un-
lock signal from BCM
BCM
Recognizes the following status and transmits it to the driver seat control unit via
CAN communication
• Door lock: UNLOCK
(with Intelligent Key or driver side door request switch)
• Key ID signal
• Ignition switch signal
DIAGNOSIS SYSTEM (DRIVER SEAT CONTROL UNIT)
ADP-35
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
DIAGNOSIS SYSTEM (DRIVER SEAT CONTROL UNIT)
Diagnosis Description
INFOID:0000000003759092
The auto drive positioner system can be checked and diagnosed for component operation with CONSULT-III.
DIAGNOSTIC MODE
CONSULT-III Function
INFOID:0000000003759093
SELF-DIAGNOSIS RESULTS
.
DATA MONITOR
Diagnostic mode
[AUTO DRIVE POS.]
Description
WORK SUPPORT
Changes the setting of each function
SELF-DIAG RESULTS
Performs self-diagnosis for the auto drive positioner system and displays the results
DATA MONITOR
Displays input signals transmitted from various switches and sensors to driver seat con-
trol unit in real time
CAN DIAG SUPPORT MNTR
The result of transmit/receive diagnosis of CAN communication can be read
ACTIVE TEST
Drive each output device
ECU IDENTIFICATION
Displays part numbers of driver seat control unit parts
Monitor Item
Unit
Main
Signals
Selection
From
Menu
Contents
SET SW
“ON/OFF”
×
×
ON/OFF status judged from the setting switch signal
MEMORY SW 1
“ON/OFF”
×
×
ON/OFF status judged from the seat memory switch 1 sig-
nal
MEMORY SW 2
“ON/OFF”
×
×
ON/OFF status judged from the seat memory switch 2 sig-
nal
SLIDE SW–FR
“ON/OFF”
×
×
ON/OFF status judged from the sliding switch (forward) sig-
nal
SLIDE SW–RR
“ON/OFF”
×
×
ON/OFF status judged from the sliding switch (backward)
signal
RECLN SW–FR
“ON/OFF”
×
×
ON/OFF status judged from the reclining switch (forward)
signal
RECLN SW–RR
“ON/OFF”
×
×
ON/OFF status judged from the reclining switch (backward)
signal
LIFT FR SW–UP
“ON/OFF”
×
×
ON/OFF status judged from the lifting switch front (up) sig-
nal
LIFT FR SW–DN
“ON/OFF”
×
×
ON/OFF status judged from the lifting switch front (down)
signal
LIFT RR SW–UP
“ON/OFF”
×
×
ON/OFF status judged from the lifting switch rear (up) sig-
nal
LIFT RR SW–DN
“ON/OFF”
×
×
ON/OFF status judged from the lifting switch rear (down)
signal
DETENT SW
“ON/OFF”
×
×
The selector lever position “OFF (P position) / ON (other
than P position)” is judged from the detention switch signal
STARTER SW
“ON/OFF”
×
×
Ignition key switch ON (START, ON) /OFF (ACC, OFF) sta-
tus judged from the ignition switch signal
ADP-36
< FUNCTION DIAGNOSIS >
DIAGNOSIS SYSTEM (DRIVER SEAT CONTROL UNIT)
ACTIVE TEST
CAUTION:
When driving vehicle never perform active test.
WORK SUPPORT
SLIDE PULSE
—
–
×
Value (32768) when battery connections are standard. If it
moves backward, the value increases. If it moves forward,
the value decreases
RECLN PULSE
—
–
×
Value (32768) when battery connections are standard. If it
moves backward, the value increases. If it moves forward,
the value decreases
LIFT FR PULSE
—
–
×
Value (32768) when battery connections are standard. If it
moves DOWN, the value increases. If it moves UP, the val-
ue decreases
LIFT RR PULSE
—
–
×
Value (32768) when battery connections are standard. If it
moves DOWN, the value increases. If it moves UP, the val-
ue decreases
VEHICLE SPEED
—
×
×
Display the vehicle speed signal received from combination
meter by numerical value [km/h]
P RANG SW CAN
“ON/OFF”
×
×
ON/OFF status judged from the P range switch signal
R RANGE (CAN)
“ON/OFF”
×
×
ON/OFF status judged from the R range switch signal
DOOR SW–FL
“ON/OFF”
×
×
ON/OFF status judged from the door switch (front driver
side) signal
DOOR SW–FR
“ON/OFF”
×
×
ON/OFF status judged from the door switch (front passen-
ger side) signal
IGN ON SW
“ON/OFF”
×
×
ON/OFF status judged from the ignition switch signal
ACC ON SW
“ON/OFF”
×
×
ON/OFF status judged from the ACC switch signal
KEY ON SW
“ON/OFF”
×
×
ON/OFF status judged from the key on switch signal
KEYLESS ID
—
×
×
Key ID status judged from the key ID signal
KYLS DR UNLK
“ON/OFF”
×
×
ON/OFF status judged from the driver side door unlock ac-
tuator output switch signal
VHCL SPEED (ABS)
“ON/OFF”
×
×
ON/OFF status judged from vehicle speed signal
HANDLE
“RHD/LHD”
×
×
RHD/LHD status judged from handle position signal
TRANSMISSION
“AT or CVT/
MT”
×
×
AT or CVT/MT status judged from transmission
STEERING STATUS
“LOCK/UN-
LOCK”
×
×
LOCK/UNLOCK status judged from steering lock unit
Monitor Item
Unit
Main
Signals
Selection
From
Menu
Contents
Test item
Description
SEAT SLIDE
Activates/deactivates the sliding motor
SEAT RECLINING
Activates/deactivates the reclining motor
SEAT LIFTER FR
Activates/deactivates the lifting motor (front)
SEAT LIFTER RR
Activates/deactivates the lifting motor (rear)
MEMORY SW INDCTR
Turns ON/OFF the memory indicator
Work item
Content
Item
SEAT SLIDE VOLUME SET
The amount of seat sliding for entry/exit assist can be selected
from 3 items.
40 mm
80 mm
150 mm
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст