Nissan Leaf. Instruction — part 1047

FRONT SEAT BELT

SB-13

< REMOVAL AND INSTALLATION >

C

D

E

F

G

I

J

K

L

M

A

B

SB

N

O

P

2. Pull adjuster cover in direction indicated by arrows as

shown in the figure. Remove adjuster cover.

3. Remove shoulder anchor mounting anchor bolt.

2. Remove outer anchor.

1. Remove front kicking plate inner and rear kicking plate inner.

Refer to

INT-28, "KICKING PLATE INNER : Removal and Installation"

.

2. Remove center pillar lower garnish.

Refer to

INT-30, "CENTER PILLAR LOWER GARNISH : Removal and Installation"

.

3. Remove driver seat from the vehicle.

Refer to

SE-29, "Removal and Installation"

.

CAUTION:

When removing and installing, use shop cloths to protect parts from damage.

4. Pull up floor carpet.

5. Remove front floor spacer and rear floor spacer.

6. Remove joint bracket assembly RH mounting bolts (A).

7. Remove mounting anchor bolt of outer anchor, and then remove outer anchor from joint bracket

assembly RH.

3. Remove seat belt pre-tensioner retractor.

1. Disconnect seat belt pre-tensioner harness connector.

CAUTION:

• For installing/removing seat belt pre-tensioner con-

nector, insert thin screwdriver wrapped in tape into

notch, lift lock and remove connector.

• Install connector with lock raised, and push lock into

connector.

• After installing the connector, check that the lock is

pushed securely into it.

2. Remove seat belt pre-tensioner retractor mounting anchor bolt and screw.

CAUTION:

Never place pre-tensioner seat belt in an area where the temperature reaches 80

°C or more.

4. Remove seat belt adjuster.

1. Remove center pillar upper garnish.

: Pawl

JMHIA1630ZZ

Vehicle front

JMHIA1802ZZ

PHIA0953J

SB-14

< REMOVAL AND INSTALLATION >

FRONT SEAT BELT

Refer to

INT-31, "CENTER PILLAR UPPER GARNISH : Removal and Installation"

.

2. Remove seat belt adjuster mounting anchor bolts.

INSTALLATION

Install in the reverse order of removal.

SEAT BELT BUCKLE
SEAT BELT BUCKLE : Removal and Installation

INFOID:0000000010119336

REMOVAL

WARNING:

Before servicing, push power switch OFF, disconnect 12V battery negative terminal and wait 5 min-

utes or more. Refer to

SB-2, "Precaution for Removing 12V Battery"

.

1. Remove front seat from the vehicle.

Refer to

SE-29, "Removal and Installation"

.

CAUTION:

When removing and installing, use shop cloths to protect parts from damage.

2. Disconnect the harness connector from the seat belt buckle and unclip harness from the seat frame.
3. Remove the seat belt buckle nut, then the seat belt buckle.

INSTALLATION

Install in the reverse order of removal.

REAR SEAT BELT

SB-15

< REMOVAL AND INSTALLATION >

C

D

E

F

G

I

J

K

L

M

A

B

SB

N

O

P

REAR SEAT BELT

Exploded View

INFOID:0000000010119338

1.

Anchor bolt

2.

Shoulder anchor

3.

Space

4.

Retaining washer

5.

Seat belt hook

6.

Outer seat belt retractor RH

7.

Outer anchor

8.

Retaining washer

9.

Outer seat belt retractor LH

AWHIA0517ZZ

SB-16

< REMOVAL AND INSTALLATION >

REAR SEAT BELT

SEAT BELT RETRACTOR
SEAT BELT RETRACTOR : Removal and Installation

INFOID:0000000010119339

REMOVAL

Outer seat belt retractor

1. Remove outer anchor.

1. Remove rear seat cushion from the vehicle.

Refer to

SE-40, "SEAT CUSHION : Removal and Installation"

.

2. Remove outer anchor mounting anchor bolt.

2. Remove shoulder anchor.

1. Remove rear seatback from the vehicle.

Refer to

SE-40, "SEAT CUSHION : Removal and Installation"

.

2. Remove luggage side lower finisher.

Refer to

INT-43, "LUGGAGE SIDE LOWER FINISHER : Removal and Installation"

.

3. Remove luggage floor upper finisher.

Refer to

INT-42, "LUGGAGE FLOOR UPPER FINISHER : Removal and Installation"

.

4. Remove shoulder anchor mounting anchor bolt.

3. Remove outer seat belt retractor mounting anchor bolt, and then remove outer seat belt retractor.

Center seat belt retractor

1. Remove center anchor.

1. Remove rear seat cushion from the vehicle.

Refer to

SE-40, "SEAT CUSHION : Removal and Installation"

.

2. Remove center anchor mounting anchor bolt.

2. Remove rear seatback LH from the vehicle.

Refer to

SE-37, "SEATBACK : Removal and Installation"

.

3. Remove seatback trim and seatback pad from seatback frame.

Refer to

SE-37, "SEATBACK : Disassembly and Assembly"

.

4. Remove center seat belt retractor.

10. Center seat belt finisher

11. Center seat belt cover

12. Seat belt buckle RH

13. Center seat belt buckle

14. Seat belt buckle LH

15. Center anchor

16. Center seat belt retractor

: Pawl

: N·m (kg-m, ft-lb)