Nissan Leaf. Instruction — part 708
GI-44
< PRECAUTION >
LIFTING POINT
Board-On Lift
INFOID:0000000010122925
CAUTION:
Check vehicle is empty when lifting.
• The board-on lift attachment (A) set at front end of vehicle
should be set on the front of the sill under the front door
opening.
• Position attachments at front and rear ends of board-on lift.
1.
Safety stand point and lift up point (front) 2.
Safety stand point and lift up point
(rear)
3.
Garage jack point (front)
4.
Garage jack point (rear)
: Vehicle front
JMAIA0902ZZ
: Vehicle front
JMAIA0004ZZ
TOW TRUCK TOWING
GI-45
< PRECAUTION >
C
D
E
F
G
H
I
J
K
L
M
B
GI
N
O
P
TOW TRUCK TOWING
Tow Truck Towing
INFOID:0000000010122926
CAUTION:
• All applicable State or Provincial (in Canada) laws and local laws regarding the towing operation
must be obeyed.
• It is necessary to use proper towing equipment to avoid possible damage to the vehicle during tow-
ing operation. Towing instructions are available from a NISSAN certified LEAF dealer.
• Always attach safety chains before towing.
• When towing, make sure that the axles, steering system and powertrain are in working condition. If
any unit is damaged, a flatbed must be used.
• NISSAN recommends that the vehicle be towed with the driving (front) wheels off the ground or that
the vehicle be placed on a flatbed truck as illustrated.
Vehicle Recovery (Freeing a Stuck Vehicle)
INFOID:0000000010122927
FRONT
Securely install the vehicle recovery hook stored with jacking tools.
Check that the hook is properly secured in the stored place after use.
WARNING:
• Stand clear of a stuck vehicle.
• Never spin your tires at high speed. This could cause them to
explode and result in serious injury. Parts of your vehicle
could also overheat and be damaged.
CAUTION:
• Tow chains or cables must be attached only to the vehicle
recovery hooks or main structural members of the vehicle.
Otherwise, the vehicle body will be damaged.
• Never use the vehicle tie downs to free a vehicle stuck in
sand, snow, mud, etc. Never tow the vehicle using the vehicle tie downs or recovery hooks.
• Always pull the cable straight out from the front of the vehicle. Never pull on the hook at an angle.
• Pulling devices should be routed so they never touch any part of the suspension, steering, brake or
cooling systems.
• Pulling devices such as ropes or canvas straps are not recommended for use in vehicle towing or
recovery.
REAR
JMAIA0352ZZ
JMAIA0297ZZ
GI-46
< PRECAUTION >
TOW TRUCK TOWING
Rear hook is designed as the recovery hook.
JMAIA0298ZZ
PROCEDURE FOR PARK LOCK RELEASE
GI-47
< PRECAUTION >
C
D
E
F
G
H
I
J
K
L
M
B
GI
N
O
P
PROCEDURE FOR PARK LOCK RELEASE
PROCEDURE FOR PARK LOCK RELEASE
INFOID:0000000010122928
CAUTION:
If the vehicle must be unavoidably moved with front wheel on the ground or four wheel on the ground,
release the park lock and hold the park lock in the released status (N position). The park lock is acti-
vated when power switch is OFF. Always perform the following work so that the N position status is
maintained. If the vehicle is moved without performing the following work, serious accident may be
caused. Steering lock does not operate after performing this work. Be careful that the brake effective-
ness is reduced and steering operation becomes heavy.
1. Turn power switch ON (Press power switch twice without depressing brake pedal). At this moment, check
that parking brake is operated.
2. Shift selector lever from the P position to the N position (Depress brake pedal while all doors are closed,
and then release the P position).
3. Remove the following fuse.
• PBW MTR
PBW MTR
JMAIA1139GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст