Nissan Leaf. Instruction — part 880
SQUEAK AND RATTLE TROUBLE DIAGNOSES
IP-15
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
LAIA0071E
IP-16
< REMOVAL AND INSTALLATION >
INSTRUMENT PANEL ASSEMBLY
REMOVAL AND INSTALLATION
INSTRUMENT PANEL ASSEMBLY
Exploded View
INFOID:0000000010120160
AWJIA1332ZZ
INSTRUMENT PANEL ASSEMBLY
IP-17
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
Removal and Installation
INFOID:0000000010120161
WORK STEP
When removing instrument panel assembly, combination meter, upper meter, audio or AV control unit take
steps as per the order shown in the following chart.
1.
Sunload sensor
2.
Optical sensor (if equipped) or
switch hole mask
3.
Switch panel
4.
Charging status indicator
5.
Instrument panel assembly
6.
Instrument mask LH
7.
Side ventilator grille LH
8.
Instrument under cover LH
9.
Instrument lower panel LH
10. Steering column upper cover
11. Steering column lower cover
12. Steering column mask
13. Instrument lower cover LH
14. USB connector
15. Heated seat switch LH
16. Instrument lower center cover
17. Heated seat switch RH
18. Auxiliary input jacks (if equipped)
19. Instrument lower cover RH
20. Glove box lid
21. Glove box cover assembly
22. Side ventilator grille RH
23. Passenger air bag module
24. Instrument mask RH
25. Audio or AV control unit
26. Upper meter
27. Cluster lid finisher
28. Meter cover
29. Combination meter
30. Cluster lid A
31. Instrument under cover RH
32. Glove box damper
33. Cluster lid C
Clip
Pawl
Metal clip
PARTS
INSTRUMENT
PANEL
ASSEMBLY
COMBINATION
METER
UPPER
METER
AUDIO OR AV
CONTROL UNIT
Instrument lower center cover
[1]
Instrument lower cover LH
[2]
Instrument lower cover RH
[3]
Front body side welt LH
[4]
Instrument side panel LH
[5]
Front pillar garnish LH
[6]
Instrument mask LH
[7]
Meter cover
[8]
Cluster lid finisher
[9]
[1]
[1]
Upper meter
[10]
[2]
[2]
Cluster lid A
[11]
[3]
Combination meter
[12]
[4]
Instrument under cover LH
[13]
Instrument lower panel LH
[14]
Side ventilator assembly LH
[15]
Driver air bag module
[16]
Steering wheel
[17]
Steering column covers
[18]
Combination switch
[19]
Spiral cable
[20]
Cluster lid C
[21]
[1]
Audio or AV control unit
[22]
[2]
Charging status indicator
[23]
Switch panel
[24]
Front body side welt RH
[25]
Instrument side panel RH
[26]
IP-18
< REMOVAL AND INSTALLATION >
INSTRUMENT PANEL ASSEMBLY
[ ]: Number indicates step in removal procedures.
WARNING:
To prevent accidental explosion, before servicing, turn ignition switch OFF, disconnect 12V battery
negative terminal and wait 5 minutes or more.
CAUTION:
To prevent damage to the parts, when removing, always use a suitable tool that is made of plastic.
REMOVAL
1. Remove instrument lower center cover.
1. Apply protective tape (A) to console finisher assembly to
protect from the damage.
2. Apply protective tape (A) around the part to protect from
damage.
3. Insert suitable tool (A) between instrument lower center
cover and center console assembly to disengage the metal
clips as shown.
4. Lift up instrument lower center cover, then disconnect harness connectors.
CAUTION:
Front pillar garnish RH
[27]
Instrument mask RH
[28]
Instrument under cover RH
[29]
Glove box lid
[30]
Glove box cover assembly
[31]
Passenger air bag module harness connector
[32]
Passenger air bag module bolt
[33]
Instrument panel assembly
[34]
JMJIA6095ZZ
JMJIA6989ZZ
: Metal clip
AWJIA1333ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст