Nissan Leaf. Instruction — part 1182
PREPARATION
TMS-9
< PREPARATION >
D
E
F
G
H
I
J
K
L
M
A
B
TMS
N
O
P
PREPARATION
PREPARATION
Special Service Tool
INFOID:0000000010120890
The actual shape of the tools may differ from those illustrated here.
Commercial Service Tools
INFOID:0000000010120891
Tool number
(TechMate No.)
Tool name
Description
KV99112300
(J-51050)
Guide pin
Removing and installing traction motor in-
verter
3 pins/set
A: 106 mm (4.17 in) (1 pin) / 96 mm (3.78
in) (2 pins)
JPCIA0332ZZ
Tool name
Description
Insulated gloves
Removing and installing high voltage
components
[Guaranteed insulation performance for
1000V/300A]
Leather gloves
• Removing and installing high voltage
components
• Protect insulated gloves
[Use leather gloves that can fasten the
wrist tight]
Insulated safety shoes
Removing and installing high voltage
components
Safety glasses
• Removing and installing high voltage
components
• To protect eye from the spatter on the
work to electric line
[ANSI Z87.1]
JMCIA0149ZZ
JPCIA0066ZZ
JPCIA0011ZZ
JPCIA0012ZZ
TMS-10
< PREPARATION >
PREPARATION
Face shield
• Removing and installing high voltage
components
• To protect face from the spatter on the
work to electric line
Insulated helmet
Removing and installing high voltage
components
Insulation resistance tester
(Multi tester)
Measuring insulation resistance, voltage,
and resistance
Tool name
Description
JPCIA0167ZZ
JPCIA0013ZZ
JPCIA0014ZZ
DESCRIPTION
TMS-11
< SYSTEM DESCRIPTION >
D
E
F
G
H
I
J
K
L
M
A
B
TMS
N
O
P
SYSTEM DESCRIPTION
DESCRIPTION
Description
INFOID:0000000010120892
• The traction motor contains a compact, lightweight, high output, high efficiency “Interior Permanent Magnet
Synchronous Motor (IPMSM)”.
• The traction motor inverter is a device which converts DC power from the Li-ion battery to AC power, and
drives the traction motor. Because the AC power frequency and voltage can be varied when the DC power is
converted to AC power, it provides control performance with a high degree of freedom.
Specifications (Traction Motor)
INFOID:0000000010120893
Location of Traction Motor Model Number and Serial Number Stamps
INFOID:0000000010120894
Max torque
254 Nm
Max output
80 kW
Max speed
10,500 rpm
Cooling system
Water cooling type
ALCIA0120ZZ
TMS-12
< SYSTEM DESCRIPTION >
COMPONENT PARTS
COMPONENT PARTS
Component Parts Location
INFOID:0000000010120895
Motor room
ALCIA0121ZZ
No.
Item
Function
VCM
• Transmits mainly the following signals to VCM via EV system CAN.
- Motor speed signal
- Motor torque limit signal
- Motor discharge status signal
- High voltage power supply preparation completion signal
- Input high voltage signal
• Receives mainly the following signals from VCM via EV system CAN.
- Target motor torque signal
- Pulse signal OFF signal
- High voltage power supply status signal
- System cut off signal
- Vibration control switching signal
- Motor charge preparation request signal
- Motor discharge request signal
- Regenerative torque command signal
- Shift position signal
• Refer to
EVC-15, "Component Parts Location"
for detailed installation location.
for details.
Electric shift control module
• The electric shift control module is built into the VCM.
• Receives mainly the following signal from electric shift control module via EV
system CAN.
- Shift position signal
• Refer to
TM-33, "Electric Shift Control Module"
for details.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст