Nissan Leaf. Instruction — part 717
GW-16
< REMOVAL AND INSTALLATION >
BACK DOOR WINDOW GLASS
BACK DOOR WINDOW GLASS
Exploded View
INFOID:0000000010119157
1.
Back door window glass
2.
Glass holder (upper LH)
3.
Glass holder (lower LH)
4.
Glass holder (upper RH)
5.
Glass holder (lower RH)
6.
Adhesive
JMKIA6424GB
BACK DOOR WINDOW GLASS
GW-17
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
GW
N
O
P
Removal and Installation
INFOID:0000000010119158
REMOVAL
1. Remove back door upper finisher. Refer to
INT-46, "BACK DOOR UPPER FINISHER : Removal and
.
2. Remove back door side finisher (LH/RH). Refer to
INT-47, "BACK DOOR SIDE FINISHER : Removal and
.
3. Remove back door lower finisher. Refer to
INT-48, "BACK DOOR LOWER FINISHER : Removal and
.
4. Remove rear wiper arm. Refer to
WW-56, "Removal and Installation"
5. Remove rear spoiler. Refer to
EXT-36, "Removal and Installation"
.
6. Remove the connectors and grounds for the back door window glass defogger.
7. Remove glass using piano wire or power cutting tool A and an inflatable pump bag B after removing mold-
ing using pliers.
NOTE:
Mark the body and glass with a matching marks if the back door window glass is reused.
WARNING:
When cutting the glass from the vehicle, always wear safety glasses and heavy gloves to help prevent
glass splinters from entering your eyes or cutting your hands.
CAUTION:
• Be careful not to scratch the glass when removing.
• Do not set or stand glass on its edge. Small chips may develop into cracks.
• Apply protective tape around the back door window glass to protect the painted surface from dam-
age.
INSTALLATION
• Use a Genuine Nissan Urethane Adhesive Kit (if available) or an equivalent and follow the instructions pro-
vided with it.
• Open a door window while the urethane adhesive is curing. This prevents the glass from being forced out by
passenger compartment air pressure when all door windows are closed.
• Inform the customer that the vehicle should remain stationary until the urethane adhesive is completely
cured (approximately 24 hours). Curing time varies with temperature and humidity.
WARNING:
• Keep heat and open flames away as primers and adhesive are flammable.
• The materials contained in the kit are harmful if swallowed, and may irritate skin and eyes. Never
let them come in contact with the skin and eyes.
• Use in an open, well ventilated location. Never breathe the vapors. They may be harmful if inhaled.
Move immediately to an area with fresh air if affected by vapor inhalation.
• Driving the vehicle before the urethane adhesive is completely cured may affect the performance
of the back door window glass in an accident.
CAUTION:
• Perform adjustment of rear wiper arm stop location. Refer to
.
• Do not use an adhesive that is past its usable term. Shelf life of this product is limited to six
months after the date of manufacture. Adhere carefully to the expiration or manufacture date
printed on the box.
7.
Back door outer
8.
Back door finisher
9.
Back door inner
10. Glass primer
11. Body primer
PIIB5779E
GW-18
< REMOVAL AND INSTALLATION >
BACK DOOR WINDOW GLASS
• Keep primers and adhesive in a cool, dry place. Ideally, they should be stored in a refrigerator.
• Do not leave primers or adhesive cartridge unattended with their caps open or off.
• The vehicle should not be driven for 24 hours or more or until the urethane adhesive is completely
cured. Curing time varies depending on temperature and humidity. The curing time increases
under lower temperature and lower humidity.
Inspection
INFOID:0000000010119159
REPAIRING WATER LEAKAGE FOR BACK DOOR WINDOW GLASS
Leakage can be repaired without removing the glass.
Determine the extent of leakage if water is leaking between the urethane adhesive material and body or glass.
This can be done by applying water to the back door window glass area while pushing glass outward.
Apply primer (if necessary) and then urethane adhesive to the leakage point to stop the leakage.
FRONT DOOR GLASS
GW-19
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
GW
N
O
P
FRONT DOOR GLASS
Exploded View
INFOID:0000000010119160
Removal and Installation
INFOID:0000000010119161
REMOVAL
1. Fully open front door glass.
2. Remove front door finisher. Refer to
INT-19, "Removal and Installation"
3. Disconnect front door speaker harness connector and remove sealing screen.
NOTE:
Cut the butyl-tape so that some parts of the butyl-tape do not remain on the sealing screen, if the sealing
screen is reused.
4. Reconnect the power window main switch and operate the power window main switch to raise or lower
the door window until the front door glass bolts can be seen.
5. Remove the front door glass bolts.
1. Front door panel
2.
Sealing screen
3.
Front door glass run
4.
Front door regulator
5.
Power window motor
6.
Front door glass
7.
Lower sash
Front
JMKIA6425ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст