Nissan Leaf. Instruction — part 1211
COMPONENT PARTS
VC-11
< SYSTEM DESCRIPTION >
D
E
F
G
H
I
J
K
L
M
A
B
VC
N
O
P
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts Location
INFOID:0000000010121202
Charge port (Vehicle front side)
Instrument lower panel LH
ALCIA0190ZZ
No.
Component
Function
EVSE
Charging status indicator
VC-15, "Charging Status Indicator"
VCM
VCM is performed integrated control for vehicle charging system.
Refer to
EVC-15, "Component Parts Location"
, for detailed installation location.
PDM (Power delivery module)
VC-12, "PDM (Power Delivery Module)"
Quick charge port
*
Charge port light
Charge connector lock actuator
VC-14, "Charge Connector Lock Actuator"
Normal charge port
Charge port lid opener actuator
Unlock the charge port lid according to operation signal from VCM.
Refer to
DLK-15, "Component Parts Location"
, for detailed installation loca-
tion.
Immediate charging switch
VC-12
< SYSTEM DESCRIPTION >
COMPONENT PARTS
*: Model with quick charge port.
PDM (Power Delivery Module)
INFOID:0000000010121203
The PDM (Power Delivery Module) is installed to the upper part of
drive motor in the motor room together with drive motor inverter and
consists of a charger and DC/DC converter.
The charger converts external AC power source to DC power source
(260 – 410 V), and charges the Li-ion battery according to the type of
charging. The DC/DC converter charges the auxiliary 12V battery
according to the VCM command.
EVSE
INFOID:0000000010121204
The EVSE (Electric Vehicle Supply Equipment) is manufactured based on the specifications prescribed in
SAE-J1772, and is for charging by connecting a commercial power source to the vehicle. The EVSE consists
of a plug, cable, control box, and a normal charge connector and supplies power to the vehicle using commer-
cial power. By conducting PWM communication with the PDM (Power Delivery Module), the EVSE performs
safe and suitable charging for the vehicle.
Normal Charge Connector
The normal charge connector is equipped with a release switch
to maintain the connection between the normal charge port and the
charge connector.
Charge connector lock switch
VC-14, "Charge Connector Lock Switch"
Charge port lid opener switch
Input charge port lid opener switch signal to VCM.
Refer to
DLK-15, "Component Parts Location"
, for detailed installation loca-
tion.
No.
Component
Function
: Vehicle front
JSCIA0602ZZ
Normal charge connector
Cable
Control box
Plug
ALCIA0131ZZ
JSCIA0604ZZ
COMPONENT PARTS
VC-13
< SYSTEM DESCRIPTION >
D
E
F
G
H
I
J
K
L
M
A
B
VC
N
O
P
The charging connector is equipped with a release switch to main-
tain the connection between the normal charging port and the charg-
ing connector. In addition, a circuit for detecting the hold status is
incorporated into the release switch, which stops the charging tem-
porarily if the release switch is pressed during charging.
NOTE:
• When the release switch is pressed, the contacts turn OFF.
• The release switch cannot be pressed while the charge connector
is locked.
Control Box
The control box is equipped with an indicator that can be used to
check the charging status and malfunction detection status. The indi-
cator operates in the following cases when a commercial power sup-
ply is connected to the EVSE.
<List of Operations>
Charge Port
INFOID:0000000010121205
The charge port is installed at the front of the vehicle and is equipped
with a normal charge port and a quick charge port (with quick
charge port models). For charging, connect the EVSE or quick
charge connector to the charge port according to the type of charg-
ing, and then start charging.
NOTE:
The figure shows a model with quick charge port.
JSCIA0294GB
ALCIA0132ZZ
Vehicle condition
Illumination status
READY
CHARGE
FAULT
When there is no AC power supply input
OFF
OFF
OFF
When AC power source is connected
ON (Approx.0.5 s)
ON (Approx.0.5 s)
ON (Approx.0.5 s)
When there is AC power supply input and the EVSE can
communicate with the vehicle charger (when not charg-
ing)
ON
OFF
OFF
Charging
ON
ON
OFF
When the EVSE is not operating
OFF
OFF
OFF
When the EVSE detects electric leakage
ON
OFF
Blink
When the EVSE detects a malfunction in itself
ON
OFF
ON
When ground is not connected
Blink
OFF
OFF
When the plug is high temperature
Blink
OFF, Blink or ON
Blink
JSCIA0606ZZ
VC-14
< SYSTEM DESCRIPTION >
COMPONENT PARTS
Charge Port Light
INFOID:0000000010121206
The charge port light is installed to the inside of the charge port lid.
It turns ON when the charge port is unlocked for improving workabil-
ity during charging.
Charge Connector Lock Actuator
INFOID:0000000010121207
The charge connector lock actuator is installed to the normal charge
port upper portion, and is composed of the swing arm that locks
the charge connector and the actuator that operates the swing
arm. The actuator operates according to the operation signal from
VCM.
Charge Connector Lock Switch
INFOID:0000000010121208
The charge connector lock switch is installed on the left instrument
lower panel. It allows the charge connector lock mode to be selected
according to the charging type.
Immediate Charging Switch
INFOID:0000000010121209
The immediate charging switch is a switch that can be used to start
charging immediately when timer charging is set.
Charge port light
: LED
JSCIA0607ZZ
JSCIA0608ZZ
JSCIA0609ZZ
JSCIA0292ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст