Nissan Leaf. Instruction — part 1240
QUICK CHARGE PORT
VC-127
< REMOVAL AND INSTALLATION >
D
E
F
G
H
I
J
K
L
M
A
B
VC
N
O
P
QUICK CHARGE PORT
Exploded View
INFOID:0000000010121296
REMOVAL
DISASSEMBLY
Quick charge port
Charge port bracket
Normal charge port
Charge connector lock actuator
: N·m (kg-m, in-lb)
JPCIA0318GB
VC-128
< REMOVAL AND INSTALLATION >
QUICK CHARGE PORT
Removal and Installation
INFOID:0000000010121297
DANGER:
Since hybrid vehicles and electric vehicles contain a high voltage battery, there is the risk of
electric shock, electric leakage, or similar accidents if the high voltage component and vehicle are
handled incorrectly. Be sure to follow the correct work procedures when performing inspection and
maintenance.
WARNING:
• Be sure to remove the service plug in order to disconnect the high voltage circuits before perform-
ing inspection or maintenance of high voltage system harnesses and parts.
• The removed service plug must always be carried in a pocket of the responsible worker or placed in
the tool box during the procedure to prevent the plug from being connected by mistake.
• Be sure to wear insulating protective equipment consisting of glove, shoes, face shield and glasses
before beginning work on the high voltage system.
• Never allow workers other than the responsible person to touch the vehicle containing high voltage
parts. To keep others from touching the high voltage parts, these parts must be covered with an insu-
lating sheet except when using them.
• Refer to
VC-6, "High Voltage Precautions"
CAUTION:
Never bring the vehicle into the READY status with the service plug removed unless otherwise
instructed in the Instruction. A malfunction may occur if this is not observed.
REMOVAL
WARNING:
Disconnect high voltage. Refer to
GI-33, "How to Disconnect High Voltage"
1. Check voltage in high voltage circuit. (Check that condenser are discharged.)
a. Lift up the vehicle and remove the Li-ion battery under covers. Refer to
Quick charge port
Clip
Spring (large)
Port cap
Damper
Pin
Lever
Spring (small)
: Always replace after every disassembly.
JPCIA0319ZZ
QUICK CHARGE PORT
VC-129
< REMOVAL AND INSTALLATION >
D
E
F
G
H
I
J
K
L
M
A
B
VC
N
O
P
b. Remove high voltage harness from clamp .
c. Disconnect high voltage harness connector and high voltage harness for PTC heater from front side of Li-
ion battery. Refer to
EVB-181, "Removal and Installation"
.
d. Measure voltage between high voltage harness connector terminals and high voltage harness connector
terminals for PTC heater.
DANGER:
Touching high voltage components without using the appropriate protective equipment will
cause electrocution.
CAUTION:
For voltage measurements, use a tester which can measure to 500 V or higher.
2. Remove the radiator upper grille. Refer to
DLK-165, "RADIATOR UPPER GRILLE : Removal and Installa-
3. Remove the charge port lid inner cover. Refer to
WARNING:
Be sure to put on insulating protective gear before beginning work on the high voltage sys-
tem.
4. Remove the camera harness clamp, and disconnect the connectors on both the camera side and engine
harness side.
5. Remove the charge port cover assembly together with the camera harness. Refer to
.
6. Remove quick charge port mounting nuts.
WARNING:
Be sure to put on insulating protective gear before beginning work on the high voltage sys-
tem.
JPCIA0299ZZ
Standard
: 5 V or less
JPCIA0296ZZ
VC-130
< REMOVAL AND INSTALLATION >
QUICK CHARGE PORT
7. Remove the quick charge port harness connector clamp from the bracket, then remove the quick
charge port harness connector .
WARNING:
Be sure to put on insulating protective gear before beginning work on the high voltage sys-
tem.
8. Remove the quick charge port harness clamp from the bracket.
• Radiator core support upper side
- Press the 2 tabs while removing the harness clamp .
WARNING:
Be sure to put on insulating protective gear before beginning work on the high voltage sys-
tem.
• Inverter side
- Press the 2 tabs while removing the harness clamp .
WARNING:
ALCIA0115ZZ
JPCIA0321ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст