Nissan Leaf. Instruction — part 1178
TM-118
< DTC/CIRCUIT DIAGNOSIS >
[ELECTRIC SHIFT]
SELECTOR INDICATOR CIRCUIT
>> Repair or replace damaged parts.
9.
CHECK HARNESS BETWEEN VCM AND SELECTOR INDICATOR
1. Disconnect the VCM connector.
2. Check the continuity between VCM vehicle side harness connector terminals and selector indicator vehi-
cle side harness connector terminals.
3. Check the continuity between VCM vehicle side harness connector terminals and ground.
Is the inspection result normal?
YES
>> GO TO 10.
NO
>> Repair or replace damaged parts.
10.
CHECK GROUND CIRCUIT
Check the continuity between VCM vehicle side harness connector terminals and ground.
Is the inspection result normal?
YES
>> Replace the selector indicator. Refer to
TM-125, "Removal and Installation"
NO
>> Repair or replace damaged parts.
VCM
Selector indicator
Continuity
Connector
Terminal
Connector
Terminal
E61
18
M56
1
Existed
33
7
34
8
46
3
VCM
Ground
Continuity
Connector
Terminal
E61
18
Ground
Not existed
33
34
46
VCM
Ground
Continuity
Connector
Terminal
E61
58
Ground
Existed
65
E62
118
126
SHIFT POSITION INDICATOR CIRCUIT
TM-119
< DTC/CIRCUIT DIAGNOSIS >
[ELECTRIC SHIFT]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
SHIFT POSITION INDICATOR CIRCUIT
Component Function Check
INFOID:0000000010119640
1.
CHECK SHIFT POSITION INDICATOR
1. Set the vehicle to READY.
2. Shift the selector lever.
3. Check that the indication of the shift position indicator in the combination meter corresponds to the
selected shift position.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Go to
Diagnosis Procedure
INFOID:0000000010119641
1.
CHECK DTC OF ELECTRIC SHIFT CONTROL MODULE
With CONSULT
1. Power switch ON.
2. Perform “Self Diagnostic Results” in “SHIFT”.
Is any DTC detected?
YES
>> Check DTC detected item. Refer to
.
NO
>> GO TO 2.
2.
CHECK DTC OF VCM
With CONSULT
1. Power switch ON.
2. Perform “Self Diagnostic Results” in “EV/HEV”.
Is any DTC detected?
YES
>> Check DTC detected item. Refer to
.
NO
>> GO TO 3.
3.
CHECK DTC OF COMBINATION METER
With CONSULT
1. Power switch ON.
2. Perform “Self Diagnostic Results” in “METER”.
Is any DTC detected?
YES
>> Check DTC detected item. Refer to
NO
>> Check input/output signals of combination meter. Refer to
.
TM-120
< DTC/CIRCUIT DIAGNOSIS >
[ELECTRIC SHIFT]
ELECTRIC SHIFT WARNING LAMP
ELECTRIC SHIFT WARNING LAMP
Component Function Check
INFOID:0000000010119642
1.
CHECK ELECTRIC SHIFT WARNING LAMP
Check that electric shift warning lamp turns ON for approx. 2 seconds after power switch is ON.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Go to
Diagnosis Procedure
INFOID:0000000010119643
1.
CHECK DTC OF ELECTRIC SHIFT CONTROL MODULE
With CONSULT
1. Power switch ON.
2. Perform “Self Diagnostic Results” in “SHIFT”.
Is any DTC detected?
YES
>> Check DTC detected item. Refer to
.
NO
>> GO TO 2.
2.
CHECK DTC OF VCM
With CONSULT
1. Power switch ON.
2. Perform “Self Diagnostic Results” in “EV/HEV”.
Is any DTC detected?
YES
>> Check DTC detected item. Refer to
.
NO
>> 1. Check input/output signals of VCM. Refer to
.
2. If inspection result is OK, GO TO 3.
3.
CHECK DTC OF COMBINATION METER
With CONSULT
1. Power switch ON.
2. Perform “Self Diagnostic Results” in “METER”.
Is any DTC detected?
YES
>> Check DTC detected item. Refer to
NO
>> Check input/output signals of combination meter. Refer to
.
ELECTRIC SHIFT SELECTOR
TM-121
< REMOVAL AND INSTALLATION >
[ELECTRIC SHIFT]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
REMOVAL AND INSTALLATION
ELECTRIC SHIFT SELECTOR
Exploded View
INFOID:0000000010119644
Removal and Installation
INFOID:0000000010119645
CAUTION:
Lock pin
Selector lever knob
Shift gate
Slider plate
Spring
Electric shift sensor
Collar
Body bracket
P position switch harness
: Vehicle front
: N·m (kg-m, in-lb)
JSDIA4235GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст