Nissan Leaf. Instruction — part 850
PREPARATION
INL-5
< PREPARATION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
PREPARATION
PREPARATION
Special Service Tool
INFOID:0000000010122259
The actual shape of the tools may differ from those illustrated here.
Tool number
(TechMate No.)
Tool name
Description
—
(J-46534)
Trim Tool Set
Removing trim components
AWJIA0483ZZ
INL-6
< SYSTEM DESCRIPTION >
COMPONENT PARTS
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts Location
INFOID:0000000010122260
No.
Part
Description
1.
Luggage room lamp
.
2.
Room lamp
Refer to
.
3.
Remote keyless entry receiver
Refer to
DLK-18, "Remote Keyless Entry Receiver"
4.
Optical sensor
Refer to
5.
BCM
• Activates the interior room lamp timer depending on the vehicle condition to turn the
interior room lamps ON/OFF.
• Operates the interior room lamp battery saver depending on the vehicle condition to
cut the interior room lamp power supply.
• Detects each switch condition by the combination switch reading function.
• Judges the illumination lamp ON/OFF status depending on the vehicle condition.
And then it transmits position light request signal to IPDM E/R and combination
meter (with CAN communication).
BCS-5, "BODY CONTROL SYSTEM : Component Parts Location"
for detailed
installation location.
ALLIA1454ZZ
COMPONENT PARTS
INL-7
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
6.
IPDM E/R
Controls the integrated relay according to the request signal from BCM (via CAN com-
munication). Refer to
PCS-6, "Component Parts Location"
for detailed installation lo-
cation.
7.
Door lock and unlock switch
DLK-19, "Door Lock and Unlock Switch"
.
8.
Front outside handle LH (request
switch) (RH similar)
DLK-19, "Front Door Request Switch (LH)"
9.
Front door lock assembly (LH) (door
key cylinder switch)
DLK-18, "Front Door Lock Assembly (LH)"
.
10.
Front door switch LH (others similar)
11.
Back door lock assembly (back door
switch)
DLK-19, "Back Door Lock Assembly"
.
12.
Back door opener switch (request
switch)
Provides back door open/ close condition to BCM.
13.
Map lamp
14.
Combination meter
Receives the dimmer signal from BCM (via CAN communication).
15.
Power switch
16.
Meter control switch
(illumination control switch)
Adjusts the illumination system and combination meter illumination brightness.
17.
Combination switch
The combination switch provides input to the BCM about the combination switch posi-
tion.
No.
Part
Description
INL-8
< SYSTEM DESCRIPTION >
SYSTEM
SYSTEM
INTERIOR ROOM LAMP CONTROL SYSTEM
INTERIOR ROOM LAMP CONTROL SYSTEM : System Description
INFOID:0000000010122261
SYSTEM DIAGRAM
OUTLINE
• Interior room lamps* are controlled by interior room lamp timer control function of BCM.
*: Map lamp and room lamp (when map lamp switch and room lamp switch are in DOOR position).
• Luggage room lamp is controlled by luggage room lamp control function of BCM.
• Power switch illumination is controlled by the power switch illumination control function of BCM.
INTERIOR ROOM LAMP TIMER CONTROL
Interior Room Lamp Timer Basic Operation
NOTE:
A: Sets the interior room lamp gradual brightening and dimming time.
B: Gradually dims from 100% to 0% and gradually brightens 0% to 100% in 1 second.
JMLIA1921GB
JMLIA0961GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст