Nissan Leaf. Instruction — part 382
SYSTEM (POWER DOOR LOCK SYSTEM)
DLK-23
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
BCM outputs the lock signal to all door lock actuators when it detects that the power switch is in the ON posi-
tion and the shift signal received from the VCM is shifted from the P position to any position other than P.
Setting change of Automatic Door Lock/Unlock Function
The lock operation setting of the automatic door lock/unlock function can be changed.
With CONSULT
The ON/OFF switching of the automatic door lock function and the type selection of the automatic door lock/
unlock function can be performed at the “Work support” setting of CONSULT.
Without CONSULT
The automatic door lock function ON/OFF can be switched by performing the following operation:
1. Close all doors (door switch OFF)
2. Power switch: OFF
→ON
3. Press and hold the door lock and unlock switch for 5 seconds or more in the lock direction within 20 sec-
onds after turning the power switch ON.
4. The switching complete when the hazard lamp blinks.
AUTOMATIC DOOR LOCK/UNLOCK FUNCTION (UNLOCK OPERATION)
The automatic door lock/unlock function is the function that unlocks all doors linked with the power switch
position or shift position. It has 2 types as per the following items:
POWER OFF Interlock Door Unlock
All doors are unlocked when the power switch position is changed from ON to OFF.
BCM outputs the unlock signal to all door lock actuators when it detects that the power switch position is
changed from ON to OFF.
P Position Interlock Door Unlock
All doors are unlocked when shifting the selector lever from any position other than P to P position.
BCM outputs the unlock signal to all door lock actuators when it detects that the power switch is in the ON
position and the shift signal received from VCM is shifted from any position other than P to P position.
Setting change of Automatic Door Lock/Unlock Function
The unlock operation setting of the automatic door lock/unlock function can be changed.
With CONSULT
The ON/OFF switching of the automatic door lock/unlock function and the type selection of the automatic door
lock/unlock function can be performed at the “Work support” setting of CONSULT.
Without CONSULT
The automatic door lock/unlock function ON/OFF can be switched by performing the following operation:
1. Close all doors below (door switch OFF)
2. Power switch: OFF
→ON
3. Press and hold the door lock and unlock switch for 5 seconds or more in the unlock direction within 20
seconds after turning the power switch position ON.
4. The switching is complete when the hazard lamp blinks.
OFF
→ ON
: 2 blinks
ON
→ OFF
: 1 blink
OFF
→ ON
: 2 blinks
ON
→ OFF
: 1 blink
DLK-24
< SYSTEM DESCRIPTION >
SYSTEM (INTELLIGENT KEY SYSTEM)
SYSTEM (INTELLIGENT KEY SYSTEM)
INTELLIGENT KEY SYSTEM
INTELLIGENT KEY SYSTEM : System Description
INFOID:0000000010119724
SYSTEM DIAGRAM
• The Intelligent Key system is a system that makes it possible to lock and unlock the door locks (door lock/
unlock function) by carrying the Intelligent Key, which operates based on the results of electronic ID verifica-
tion using two-way communication between the Intelligent Key and the vehicle (BCM).
NOTE:
The driver should always carry the Intelligent Key.
• The settings for each function can be changed with CONSULT.
• If an Intelligent Key is lost, a new Intelligent Key can be registered. A maximum of 4 Intelligent Keys can be
registered.
• It is possible to perform a diagnosis on the system and register an Intelligent Key with CONSULT.
ALKIA3113GB
Function
Description
Refer
Door lock
Lock/unlock can be performed by pressing the request switch
Back door opener
The back door can be opened by carrying the Intelligent Key and pressing the
back door opener switch
Remote keyless entry
Lock/unlock can be performed by pressing the remote controller button of the In-
telligent Key
SYSTEM (INTELLIGENT KEY SYSTEM)
DLK-25
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
DOOR LOCK FUNCTION
DOOR LOCK FUNCTION : System Description
INFOID:0000000010119725
SYSTEM DIAGRAM
DOOR REQUEST SWITCH OPERATION
When pressing the door request switch, it is possible to lock and unlock the door by carrying the Intelligent
Key.
OPERATION DESCRIPTION
• When the BCM detects that each door request switch is pressed, it activates the outside key antenna and
inside key antenna corresponding to the pressed door request switch and transmits the request signal to the
Intelligent Key. And then, check that the Intelligent Key is near the door.
• If the Intelligent Key is within the outside key antenna detection area, it receives the request signal and
transmits the key ID signal to the BCM via remote keyless entry receiver.
• BCM receives the key ID signal and compares it with the registered key ID.
• BCM transmits door lock/unlock signal and operates each door lock actuator. At the same time, BCM blinks
hazard warning lamp (lock: 2 times, unlock: 1 time) and sounds Intelligent Key buzzer (lock: 2 times, unlock:
1 time) as a reminder.
Key reminder
The key reminder buzzer sounds a warning if the door is locked with the key left
inside the vehicle
Warning
If an action that does not meet the operating condition of the Intelligent Key sys-
tem is taken, the buzzer sounds to inform the driver
READY set function
The vehicle can be set READY while carrying the Intelligent Key
Panic alarm
When Intelligent Key panic alarm button is pressed, horn sounds
Interior room lamp control
Interior room lamp is controlled according to door lock/unlock state
Charge connector unlock
Charge connector unlock can be performed by a long press of the charge port
lid opener button on the Intelligent Key
Charge port lid open
Charge port lid open can be performed by a long press of the charge port lid
opener button on the Intelligent Key
Function
Description
Refer
JMKIA6214GB
DLK-26
< SYSTEM DESCRIPTION >
SYSTEM (INTELLIGENT KEY SYSTEM)
OPERATION CONDITION
If the following conditions are satisfied, door lock/unlock operation is performed if the door request switch is
operated:
*: Even with a registered Intelligent Key remaining inside the vehicle, door locks can be locked and unlocked from outside of the vehicle
with a spare Intelligent Key as long as key IDs are different.
OUTSIDE KEY ANTENNA DETECTION AREA
The outside key antenna detection area of door lock/unlock function
is in the range of approximately 80 cm (31.50 in) surrounding the
driver, passenger door handles (1) and back door handle (2). How-
ever, this operating range depends on the ambient conditions.
SELECTIVE UNLOCK FUNCTION
Lock Operation
When a LOCK signal is sent from door request switch (LH, RH or back door), all doors are locked.
Unlock Operation
• When an UNLOCK signal from front door request switch (LH) is transmitted, LH door unlocks. When another
UNLOCK signal is transmitted within 60 seconds, all door unlocks.
• When an UNLOCK signal from front door request switch (RH) is transmitted, RH door unlocks. When
another UNLOCK signal is transmitted within 60 seconds, all door unlocks.
• When an UNLOCK signal from back door request switch is transmitted, back door unlocks. When another
UNLOCK signal is transmitted within 60 seconds, all door unlocks.
How to Change Selective Unlock Operation Mode
Selective unlock operation mode can be changed using CONSULT.
BCS-20, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"
HAZARD AND BUZZER REMINDER FUNCTION
During lock, unlock, operation by each request switch, the hazard warning lamps and Intelligent Key warning
buzzer will blink or honk as a reminder.
When doors are locked, unlocked by each request switch, BCM honks Intelligent Key warning buzzer as a
reminder and blinks.
Operating Function of Hazard and Buzzer Reminder
Hazard and buzzer reminder does not operate if power switch ON position.
How to Change Hazard and Buzzer Reminder Operation Mode
Hazard and buzzer reminder operation mode can be changed using CONSULT.
BCS-20, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"
Each door request switch operation
Operation condition
Lock
• All doors are closed
• Panic alarm is not activated
• Power switch is in the OFF position
• Intelligent Key is outside the vehicle
• Intelligent Key is within outside key antenna detection area *
Unlock
• Power switch is in the OFF position
• Intelligent Key is outside the vehicle
• Intelligent Key is within outside key antenna detection area *
JMKIA6140ZZ
Operation
Hazard warning lamp blinks
Intelligent Key warning buzzer honk
Unlock
Once
Once
Lock
Twice
Twice
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст