Nissan Leaf. Instruction — part 962
MWI
DIAGNOSIS SYSTEM (COMBINATION METER)
MWI-51
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SHIFT IND
[P, R, N, D]
Status of shift indicator display judged based on the shift position signal received
from VCM via CAN communication.
BUCKLE SW
[On/Off]
Status of seat belt buckle switch (driver side).
BRAKE OIL SW
[On/Off]
Status of brake fluid level switch.
MODE A SW
[On/Off]
Status of enter switch.
MODE B SW
[On/Off]
Status of select switch.
PASS BUCKLE SW
[On/Off]
Status of seat belt buckle switch (passenger side).
LED LMP R OPEN
[On/Off]
Status of front combination lamp RH judged based on LED headlamp (RH) warn-
ing signal input from front combination lamp RH.
LED LMP L OPEN
[On/Off]
Status of front combination lamp LH judged based on LED headlamp (LH) warning
signal input from front combination lamp LH.
CHG CONCT DET
[On/Off]
Charge connector connection status judged based plug in signal input from PDM
(power delivery module).
ALL PWER MTER
[kW]
Status of current power meter display, judged based on current motor power sig-
nal received from VCM via CAN communication.
TPMS PRESS L
[On/Off]
Status of check low tire pressure warning detected from TPMS warning lamp sig-
nal received from BCM via CAN communication.
ASCD SPD BLINK
[On/Off]
Blinking status of ASCD set vehicle speed judged by the ASCD status signal re-
ceived from VCM via CAN communication.
ASCD STATUS
[Off, ASCD, CRUISE, SL ON, SL
SET]
Status of ASCD status display judged by the ASCD status signal received from
VCM via CAN communication.
ASCD REQ SPD
[mph, km/h or Off]
ASCD set vehicle speed value judged by the ASCD status signal received from
VCM via CAN communication.
BAT REMAIN
[kWh]
Value of Li-ion battery available charge signal received from VCM via CAN com-
munication.
BAT REMAIN LEV
[LEV 1-12]
ON segment value of Li-ion battery available charge gauge received from VCM
via CAN communication.
BAT CHG CAP LEV
[LEV 1-12]
ON segment value of Li-ion battery capacity level gauge received from VCM via
CAN communication.
BAT TEMP
[
°F or °C]
Value of Li-ion battery temperature signal received from VCM via CAN communi-
cation.
POWER MAX
[kW]
Value of maximum motor output power signal received from VCM via CAN com-
munication.
REGENE MAX
[kW]
Value of maximum regenerable power signal received from VCM via CAN com-
munication.
ECO IND1
[0-15]
ON segment value of instant ECO indicator received from VCM via CAN commu-
nication.
ECO IND2
[OFF, seg11-seg15+seg24]
ON segment value of ECO tree received from VCM via CAN communication.
SFT W/L
[On/Off]
Status of electric shift warning lamp judged based on electric shift warning lamp
signal received from VCM via CAN communication.
REGENE W/L
[On/Off]
Status of brake system warning lamp judged based on brake system warning
lamp signal received from electrically-driven intelligent brake unit via CAN com-
munication.
EV SYSTEM W/L
[On/Off]
Status of EV system warning lamp judged based on EV system warning lamp re-
quest signal received from VCM via CAN communication.
Display item [Unit]
MAIN
SIGNALS
Description
MWI-52
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (COMBINATION METER)
W/L ON HISTORY
• Stores histories when warning/indicator lamp is turned on.
• “W/L ON HISTORY” indicates the “TIME” when the warning/indicator lamp is turned on.
• The “TIME” above is:
- 0: The condition that the warning/indicator lamp has been turned on 1 or more times after starting the engine
and waiting for 30 seconds.
- 1 - 39: The number of times the engine was restarted after the 0 condition.
- NO W/L ON HISTORY: Stores NO (0) turning on history of warning/indicator lamp.
NOTE:
• W/L ON HISTORY is not stored for approximately 30 seconds after the engine starts.
• Brake warning lamp does not store any history when the parking brake is applied or the brake fluid level gets
low.
Display Item
SFT P W DSP
[On/Off]
This item is displayed, but cannot be monitored.
SFT DSP
[Off, PKB, SFT MALF, SFT POSI]
Status of electric shift warning display judged based on electric shift warning mes-
sage signal received from VCM via CAN communication.
PUSH SW W DSP
[On/Off]
Status of remove charge connector warning display judged based on plug in warn-
ing display signal received from VCM via CAN communication.
100V CHG TIME
[min]
Value of remaining time to charge completion (100 V) signal received from VCM
via CAN communication.
200V CHG TIME
[min]
Value of remaining time to charge completion (200 V) signal received from VCM
via CAN communication.
CHARGE STATE
[100V, 200V, QICK CHG, OFF]
Charge status judged based on charge status signal received from VCM via CAN
communication.
DCDC W DSP
[OFF,STOP,CRUISE]
Status of DC/DC converter warning display judged based on vehicle stop and
parking brake operation request display signal received from VCM via CAN com-
munication.
SFT W/L
[On/Off]
Status of electric shift warning signal input from VCM.
DTE DIF
[mi or km]
Value of driving range difference signal received from VCM via CAN communica-
tion.
DTE INPUT
[mi or km]
Value of driving range signal received from VCM via CAN communication.
DTE 2ND W
[On, BLINK, Off]
Status of driving range display (“– – –”) blinking, judged based on driving range
flashing request signal received from VCM via CAN communication.
BAT LOW W/L
[On/Off]
Status of low battery charge warning lamp judged based on low battery charge
warning lamp request signal received from VCM via CAN communication.
ELE COMPR OFF
[kW/h]
Value of A/C OFF average electricity consumption for driving range signal re-
ceived from VCM via CAN communication.
ELE COMPR ON
[kW/h]
Value of A/C ON average electricity consumption for driving range signal received
from VCM via CAN communication.
DTE BLINK
[On/Off]
Status of driving range display blinking, judged based on driving range flashing re-
quest signal received from VCM via CAN communication/
Display item [Unit]
MAIN
SIGNALS
Description
Display item
Description
ABS W/L
Lighting history of ABS warning lamp.
VDC/TCS IND
Lighting history of VDC OFF indicator lamp.
SLIP IND
Lighting history of VDC warning lamp.
BRAKE W/L
Lighting history of brake warning lamp.
DOOR W/L
Lighting history of door open warning.
CRUISE IND
Lighting history of CRUISE indicator.
MWI
DIAGNOSIS SYSTEM (COMBINATION METER)
MWI-53
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SET IND
Lighting history of SET indicator.
AIR PRES W/L
Lighting history of low tire pressure warning lamp.
EPS W/L
Lighting history of EPS warning lamp.
CHAGE W/L
Lighting history of 12-volt battery charge warning lamp.
REGENE BRAKE W/L
Lighting history of brake system warning lamp.
SLOW
Lighting history of power limitation indicator.
LED LAMP W/L
Lighting history of headlamp warning lamp.
Display item
Description
MWI-54
< ECU DIAGNOSIS INFORMATION >
COMBINATION METER
ECU DIAGNOSIS INFORMATION
COMBINATION METER
Reference Value
INFOID:0000000010122406
VALUES ON THE DIAGNOSIS TOOL
Monitor item
Condition
Value/Status
SPEED METER
[mph or km/h]
Power switch
ON
While driving
Input value of vehicle speed signal
(CAN communication signal)
NOTE:
655.35 is displayed when the malfunc-
tion signal is received
SPEED OUTPUT
[mph or km/h]
Power switch
ON
While driving
Output value of vehicle speed signal
(CAN communication signal)
NOTE:
655.35 is displayed when the malfunc-
tion signal is received
ODO OUTPUT
[mph or km/h]
Power switch
ON
—
Output value of odometer signal (CAN
communication signal)
ABS W/L
Power switch
ON
ABS warning lamp ON
On
ABS warning lamp OFF
Off
VDC/TCS IND
Power switch
ON
ESP (VDC) OFF indicator lamp ON
On
ESP (VDC) OFF indicator lamp OFF
Off
SLIP IND
Power switch
ON
ESP (VDC) warning lamp ON
On
ESP (VDC) warning lamp OFF
Off
BRAKE W/L
Power switch
ON
Brake warning lamp ON
On
Brake warning lamp OFF
Off
DOOR W/L
Power switch
ON
Door open warning ON
On
Door open warning OFF
Off
HI-BEAM IND
Power switch
ON
High-beam indicator lamp ON
On
High-beam indicator lamp OFF
Off
TURN IND
Power switch
ON
Turn indicator lamp ON
On
Turn indicator lamp OFF
Off
FR FOG IND
Power switch
ON
Front fog lamp indicator lamp ON
On
Front fog lamp indicator lamp OFF
Off
LIGHT IND
Power switch
ON
Position lamp indicator lamp ON
On
Position lamp indicator lamp OFF
Off
CRUISE IND
Power switch
ON
CRUISE indicator ON
On
CRUISE indicator OFF
Off
SET IND
Power switch
ON
SET indicator ON
On
SET indicator OFF
Off
KEY G/Y W/L
Power switch
ON
During Intelligent Key warning malfunction
indication
On
Other than the above
Off
EPS W/L
Power switch
ON
EPS warning lamp ON
On
EPS warning lamp OFF
Off
SLOW IND
Power switch
ON
Power limitation indicator lamp ON
On
Power limitation indicator lamp OFF
Off
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст