Nissan Frontier D40. Instruction — part 667
FRONT FOG LAMP
EXL-141
< ON-VEHICLE MAINTENANCE >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
4.
Adjust front fog lamps using adjustment screw so that the top
edge of the high intensity zone is 100 mm (4 in) below the height
of the fog lamp centers as shown.
• When performing adjustment, if necessary, cover the head-
lamps and opposite fog lamp.
MEL328G
EXL-142
< ON-VEHICLE REPAIR >
HEADLAMP
ON-VEHICLE REPAIR
HEADLAMP
Bulb Replacement
INFOID:0000000005274786
CAUTION:
Leaving bulb removed from the headlamp housing for a long period of time can deteriorate the perfor-
mance of the lens and reflector (dirt, clouding). Always prepare a new bulb and have it on hand when
replacing a bulb.
HEADLAMP
Removal
1.
Turn front headlamp switch OFF.
2.
Disconnect the electrical connector.
3.
Rotate the headlamp bulb retaining ring counterclockwise and remove.
4.
Pull the headlamp bulb straight out from the headlamp assembly.
CAUTION:
Grasp only the plastic base when handling headlamp bulb. Never touch the glass envelope.
Installation
Installation is in the reverse order of removal.
CAUTION:
After installing bulb, be sure to install the bulb socket and plastic cap securely to ensure watertight-
ness.
FRONT TURN SIGNAL/PARKING LAMP
Removal
1.
Turn the bulb socket counterclockwise to unlock it.
2.
Pull the bulb to remove it from the socket.
Installation
Installation is in the reverse order of removal.
CAUTION:
After installing bulb, be sure to install the bulb socket and plastic cap securely to ensure watertight-
ness.
FRONT SIDE MARKER LAMP
Removal
1.
Turn the bulb socket counterclockwise to unlock it.
2.
Pull the bulb to remove it from the socket.
Installation
Installation is in the reverse order of removal.
CAUTION:
After installing bulb, be sure to install the bulb socket securely for watertightness.
Removal and Installation
INFOID:0000000005274787
FRONT COMBINATION LAMP
Removal
1.
Position front fender protector aside. Refer to
EXT-22, "Removal and Installation of Front Fender Protec-
2.
For steel bumper, remove the front bumper upper valance. Refer to
EXT-13, "Removal and Installation"
.
3.
For plastic bumper, remove the front bumper assembly. Refer to
EXT-13, "Removal and Installation"
.
4.
Remove the front combination lamp bolts.
5.
Disconnect the front combination lamp connector and remove front combination lamp.
HEADLAMP
EXL-143
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
Installation
Installation is in the reverse order of removal.
Disassembly and Assembly
INFOID:0000000005274788
DISASSEMBLY
CAUTION:
Leaving bulb removed from the headlamp housing for a long period of time can deteriorate the perfor-
mance of the lens and reflector (dirt, clouding). Always prepare a new bulb and have it on hand when
replacing a bulb.
1.
Rotate headlamp bulb retaining ring counterclockwise and remove.
CAUTION:
Grasp only the plastic base when handling headlamp bulb. Never touch the glass envelope.
2.
Turn front turn signal/parking lamp bulb socket counterclockwise to unlock and remove socket.
3.
Turn front side marker lamp bulb socket counterclockwise to unlock and remove socket.
ASSEMBLY
Installation is in the reverse order of removal.
CAUTION:
After installing bulb, be sure to install the bulb socket and plastic cap securely to ensure watertight-
ness.
: 6.0 N·m (0.61 kg-m, 53 in-lb)
AWKIA1437GB
1.
Headlamp assembly
2.
Headlamp bulb
3.
Headlamp bulb retaining ring
4.
Wiring harness assembly
5.
Front side marker lamp bulb
6.
Front turn signal/parking lamp bulb
EXL-144
< ON-VEHICLE REPAIR >
FRONT FOG LAMP
FRONT FOG LAMP
Bulb Replacement
INFOID:0000000005274789
REMOVAL
1.
Position front fender protector aside. Refer to
EXT-22, "Removal and Installation of Front Fender Protec-
2.
Disconnect fog lamp connector.
3.
Turn the bulb counterclockwise to remove it.
CAUTION:
• Do not touch the glass of bulb directly by hand. Keep
grease and other oily substances away from it. Do not
touch bulb by hand while it is lit or right after being turned
off. Burning may result.
• Do not leave bulb out of fog lamp reflector for a long time
because dust, moisture smoke, etc. may affect the perfor-
mance of fog lamp. When replacing bulb, be sure to
replace it with new one.
INSTALLATION
Installation is in the reverse order of removal.
Removal and Installation
INFOID:0000000005274790
FOG LAMP
Removal
Note:
The fog lamp is a semi-sealed beam type which uses a replaceable halogen bulb.
1.
Position front fender protector aside. Refer to
EXT-22, "Removal and Installation of Front Fender Protec-
2.
Disconnect fog lamp connector.
3.
Remove fog lamp screws and pull fog lamp rearward out of front
bumper.
CAUTION:
• Do not leave fog lamp assembly without bulb for a long
period of time. Dust, moisture, smoke, etc. entering the
fog lamp body may affect the performance. Remove the
bulb from the headlamp assembly just before replace-
ment bulb is installed.
• Grasp only the plastic base when handling the bulb.
Never touch the glass envelope. Touching the glass could
significantly affect the bulb life and/or fog lamp perfor-
mance.
Installation
Installation is in the reverse order of removal.
LKIA0573E
LKIA0660E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст