Nissan Frontier D40. Instruction — part 1001
SRC-56
< COMPONENT DIAGNOSIS >
B1017 – B1022 OCCUPANT CLASSIFICATION SYSTEM
2.
CHECK SELF-DIAG RESULT
Check for the DTC on CONSULT-lll.
Is the DTC detected?
YES
>> Refer to
SRC-56, "Diagnosis Procedure (Component Diagnosis)"
.
NO
>> Inspection End.
DTC CONFIRMATION PROCEDURE (Without CONSULT-lll)
NOTE:
SRS will not enter diagnosis mode if no malfunction is detected in user mode.
1.
IGNITION SWITCH
Turn ignition switch ON.
>> GO TO 2
2.
IGNITION SWITCH
After air bag warning lamp lights for 7 seconds, turn ignition switch OFF within 1 second.
>> GO TO 3
3.
WAIT TIME
Wait more than 3 seconds.
>> GO TO 4
4.
REPEAT STEPS
Repeat steps 1 to 3 twice.
>> GO TO 5
5.
IGNITION SWITCH
Turn ignition switch ON.
>> GO TO 6
6.
DIAGNOSTIC MODE
SRS system is now in diagnostic mode and AIR BAG warning lamp flashes. Refer to
.
>> END
Diagnosis Procedure (Component Diagnosis)
INFOID:0000000005274426
Recheck SRS after each replacement.
1.
DTC
Does CONSULT-III indicate B1019 or B1022?
YES or NO
YES
>> GO TO 2
NO
>> GO TO 6
2.
HARNESS CONNECTOR
Is there any visible damage to the connector?
YES or NO
YES
>> Replace the harness.
NO
>> GO TO 3
B1017 – B1022 OCCUPANT CLASSIFICATION SYSTEM
SRC-57
< COMPONENT DIAGNOSIS >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
3.
WIRING HARNESS
Is there any visible damage to the harness?
YES or NO
YES
>> Replace the harness.
NO
>> GO TO 4
4.
DTC
Does CONSULT-III indicate B1022?
YES or NO
YES
>> GO TO 6
NO
>> GO TO 5
5.
REPLACE RH FRONT SEAT BELT ASSEMBLY
Replace the RH front seat belt assembly.
>> GO TO 6
6.
REPLACE RH FRONT SEAT CUSHION ASSEMBLY
Replace the RH front seat cushion assembly. Refer to
SE-28, "Removal and Installation"
.
>> GO TO 7
7.
AIR BAG DIAGNOSIS SENSOR UNIT
Replace the air bag diagnosis sensor unit. Refer to
SR-15, "Removal and Installation"
>> END.
SRC-58
< COMPONENT DIAGNOSIS >
B1209 – B1211 COLLISION DETECTION
B1209 – B1211 COLLISION DETECTION
Description
INFOID:0000000005274427
DTC B1209 - B1211 COLLISION DETECTION
The air bag diagnosis sensor unit will set this DTC if it has detected a collision or rollover which has resulted in
a deployment of one or more air bags or pre-tensioners. If this DTC is detected after a SRS repair, the air bag
diagnosis sensor unit has not yet been replaced. This DTC can not be erased.
PART LOCATION
SRC-7, "SRS Component Parts Location"
DTC Logic
INFOID:0000000005274428
DTC DETECTION LOGIC
With CONSULT-lll
DTC CONFIRMATION PROCEDURE (With CONSULT-lll)
1.
INSPECTION START
Turn ignition switch ON.
>> GO TO 2.
2.
CHECK SELF-DIAG RESULT
Check for the DTC on CONSULT-lll.
Is the DTC detected?
YES
>> Refer to
SRC-58, "Diagnosis Procedure (Component Diagnosis)"
.
NO
>> Inspection End.
Diagnosis Procedure (Component Diagnosis)
INFOID:0000000005274429
SR-18, "For Frontal Collision"
or
SR-19, "For Side and Rollover Collision"
CONSULT-III name
DTC
DTC detecting condition
Repair order
FRONTAL COLLISION
DETECTION
B1209
Driver and/or front passenger air bag mod-
ules are deployed.
Refer to
SR-18, "For Frontal Collision"
.
SIDE COLLISION DE-
TECTION
B1210
Side and/or curtain air bag modules are
deployed.
Refer to
SR-19, "For Side and Rollover Collision"
.
ROLLOVER DETEC-
TION
B1211
Curtain air bag module and seat belt pre-
tensioner are deployed.
DIAGNOSIS SENSOR UNIT
SRC-59
< ECU DIAGNOSIS >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
ECU DIAGNOSIS
DIAGNOSIS SENSOR UNIT
Wiring Diagram — With Power Seats
INFOID:0000000005274430
ABHWA0077GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст