Nissan Frontier D40. Instruction — part 1113
TM-350
< DISASSEMBLY AND ASSEMBLY >
[5AT: RE5R05A]
MID SUN GEAR, REAR SUN GEAR, HIGH AND LOW REVERSE CLUTCH HUB
b.
Remove 1st one-way clutch from rear sun gear.
5.
Remove seal rings from mid sun gear.
INSPECTION
High and Low Reverse Clutch Hub Snap Ring, Rear Sun Gear Snap Ring
• Check for deformation, fatigue or damage.
CAUTION:
If necessary, replace the snap ring.
1st One-way Clutch
• Check frictional surface for wear or damage.
CAUTION:
If necessary, replace the 1st one-way clutch.
Mid Sun Gear
• Check for deformation, fatigue or damage.
CAUTION:
If necessary, replace the mid sun gear.
Rear Sun Gear
• Check for deformation, fatigue or damage.
CAUTION:
If necessary, replace the rear sun gear.
High and Low Reverse Clutch Hub
• Check for deformation, fatigue or damage.
CAUTION:
If necessary, replace the high and low reverse clutch hub.
ASSEMBLY
SCIA4633E
SCIA2861E
MID SUN GEAR, REAR SUN GEAR, HIGH AND LOW REVERSE CLUTCH HUB
TM-351
< DISASSEMBLY AND ASSEMBLY >
[5AT: RE5R05A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
1.
Install seal rings to mid sun gear.
CAUTION:
• Do not reuse seal rings.
• Apply petroleum jelly to seal rings.
2.
Install 1st one-way clutch to rear sun gear.
CAUTION:
Apply petroleum jelly to 1st one-way clutch.
3.
Install snap ring to rear sun gear using suitable tool.
4.
Install rear sun gear assembly to mid sun gear assembly.
5.
Install needle bearing to high and low reverse clutch hub.
CAUTION:
Apply petroleum jelly to needle bearing.
SCIA2861E
SCIA4633E
SCIA2859E
SCIA7018E
SCIA2857E
TM-352
< DISASSEMBLY AND ASSEMBLY >
[5AT: RE5R05A]
MID SUN GEAR, REAR SUN GEAR, HIGH AND LOW REVERSE CLUTCH HUB
6.
Install high and low reverse clutch hub to mid sun gear assem-
bly.
7.
Install snap ring to mid sun gear assembly using suitable tool.
CAUTION:
Do not expand snap ring excessively.
8.
Check operation of 1st one-way clutch.
a.
Hold mid sun gear and turn rear sun gear.
b.
Check 1st one-way clutch for correct locking and unlocking
directions.
CAUTION:
If not as shown, check installation direction of 1st one-way
clutch.
9.
Install needle bearing and bearing race to high and low reverse
clutch hub.
CAUTION:
Apply petroleum jelly to needle bearing and bearing race.
SCIA2856E
SCIA2855E
SCIA3132E
SCIA2854E
HIGH AND LOW REVERSE CLUTCH
TM-353
< DISASSEMBLY AND ASSEMBLY >
[5AT: RE5R05A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
HIGH AND LOW REVERSE CLUTCH
High and Low Reverse Clutch
INFOID:0000000005274227
COMPONENTS
QR25DE Engine
VQ40DE Engine
DISASSEMBLY
SCIA5045E
1.
High and low reverse clutch drum
2.
Driven plate
3.
Retaining plate
4.
Snap ring
5.
Drive plate
6.
Bearing race
SCIA5224E
1.
High and low reverse clutch drum
2.
Driven plate
3.
Retaining plate
4.
Snap ring
5.
Drive plate
6.
Bearing race
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст