Nissan Versa Note. Instruction — part 6
AV-16
< SYSTEM DESCRIPTION >
[BASE AUDIO]
DIAGNOSIS SYSTEM (AUDIO UNIT)
1. Press the RPT/DRM button to enter speaker channel check, and
the front left tweeter (front tweeter LH) is displayed.
2. With each additional press of the RPT/DRM button, the following information is available:
-
FR RIGHT TWEETER (front tweeter RH)
-
FR RIGHT (front door speaker RH)
-
RR RIGHT (rear speaker RH)
-
RR LEFT (rear speaker LH)
-
FR LEFT (front door speaker LH)
3. Hold the RPT/DRM button down to return to all display segments screen.
Communication Diagnosis
1. Press the DISP button, and the M-CAN message transmission
error history screen is displayed.
2. Press the DISP button again, and the TEL $$ nn (CMF message reception error history from M-CAN TEL)
screen is displayed.
3. Press the DISP button again, and the TROUBLE DEL. (deletion of M-CAN message communication his-
tory) screen is displayed. To retain the M-CAN message communication history and return to the commu-
nication diagnosis mode screen, press the DISP button.
4. To proceed to the M-CAN message communication history deletion screen, press the SEEK/TRACK
button. The REC DEL-NO? (selection of M-CAN message communication history deletion) screen is dis-
played. To cancel M-CAN message communication history deletion, wait 6 seconds and you will be
returned to the TROUBLE DEL. (deletion of M-CAN message communication history) screen. To proceed
with M-CAN message communication history deletion, press the SEEK/TRACK button again.
5. The REC DEL-YES?@ (selection of M-CAN message communication history deletion) screen is dis-
played. To cancel M-CAN message communication history deletion, press the SEEK/TRACK button
and you will be returned to the REC DEL-NO? (selection of M-CAN message communication history dele-
tion) screen. To proceed with M-CAN message communication history deletion, wait 6 seconds and the
communication history deletion will be executed. After the communication history deletion has been exe-
cuted, you will be returned to the TROUBLE DEL. (deletion of M-CAN message communication history)
screen. To return to the communication diagnosis mode screen, press the DISP button.
ALNIA1384GB
ALNIA1386GB
AV
DIAGNOSIS SYSTEM (BLUETOOTH® CONTROL UNIT)
AV-17
< SYSTEM DESCRIPTION >
[BASE AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
DIAGNOSIS SYSTEM (BLUETOOTH® CONTROL UNIT)
Diagnosis Description
INFOID:0000000009681843
The Bluetooth
®
control unit has two diagnostic checks. The first diagnostic check is performed automatically
every ignition cycle during control unit initialization. The second diagnostic check is performed by the techni-
cian using the steering wheel audio control switches prior to trouble diagnosis.
Bluetooth
®
CONTROL UNIT INITIALIZATION CHECKS
• Internal control unit failure
• Bluetooth
®
antenna connection open or shorted
• Steering wheel audio control switches [
(PHONE/SEND), (PHONE/END)] stuck closed
• Vehicle speed pulse count
• Microphone connection test (with playback to operator)
• Bluetooth
®
inquiry check
OPERATION PROCEDURE
1. Turn ignition switch to ACC or ON.
2. Wait for the Bluetooth
®
system to complete initialization. This may take up to 20 seconds.
3. Press and hold the steering wheel audio control switch
(PHONE/SEND) button for at least 5 seconds. The Bluetooth
®
system will begin to play a verbal prompt.
4. While the prompt is playing, press and hold the steering wheel
audio control switch (PHONE/END) button until you hear the
“Diagnostics mode” prompt. The Bluetooth
®
system will sound a
5-second beep.
5. While the beep is sounding, press and hold the steering wheel
audio control switch
(PHONE/END) button again until you
hear prompts.
6. The Bluetooth
®
system has now entered into the diagnostic
mode. Results of the diagnostic checks will be verbalized to the
technician. Refer to
7. After the failure records are reported, an interactive microphone
test will be performed. Follow the voice prompt. If the micro-
phone test fails, refer to
Work Flow
INFOID:0000000009459914
AWNIA3082ZZ
AWNIA3083ZZ
Failure Message
Action
“Internal failure”
Replace Bluetooth
®
control unit. Refer to
AV-56, "Removal and Installation"
.
“Bluetooth
®
antenna open”
1.
Inspect harness connection.
2.
Replace Bluetooth
®
antenna. Refer to
AV-57, "Removal and Installation"
“Bluetooth
®
antenna shorted”
“Phone/Send for Hands Free System is stuck”
Check steering switches. Refer to
.
“Phone/End for the Hands Free System is stuck”
“Microphone test” (failed interactive test)
1.
Inspect harness between Bluetooth
®
control unit and microphone.
2.
Replace microphone. Refer to
AV-56, "Removal and Installation"
.
AV-18
< ECU DIAGNOSIS INFORMATION >
[BASE AUDIO]
AUDIO UNIT
ECU DIAGNOSIS INFORMATION
AUDIO UNIT
Reference Value
INFOID:0000000009459915
TERMINAL LAYOUT
PHYSICAL VALUES
AWNIA3055ZZ
Terminal
(Wire color)
Description
Condition
Reference value
(Approx.)
+
–
Signal name
Input/
Output
Ignition
switch
Operation
2
(GR)
3
(P)
Sound signal front speaker
LH
Output
ON
Sound output.
4
(W)
5
(R)
Sound signal rear speaker
LH
Output
ON
Sound output.
6
(BR)
15
(GR)
Steering switch signal A
Input
ON
Press SOURCE switch
0V
Press
switch
1.0V
Press
switch
2.0V
Press
switch
3.0V
Except above
5.0V
7
(W)
Ground
ACC power supply
Input
ACC
—
Battery voltage
9
(LG/R)
8
(B)
Illumination control signal
Input
ON
Headlamps ON.
Battery voltage
SKIA0177E
SKIA0177E
AV
AUDIO UNIT
AV-19
< ECU DIAGNOSIS INFORMATION >
[BASE AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
11
(O)
12
(V)
Sound signal front speaker
RH
Output
ON
Sound output.
13
(L)
14
(Y)
Sound signal rear speaker
RH
Output
ON
Sound output.
16
(V)
15
(GR)
Steering switch signal B
Input
ON
Press
switch
0V
Press
switch
1.0V
Press
switch
2.0V
Except above
5.0V
18
(LG)
Ground Vehicle speed signal
Input
ON
When vehicle speed is ap-
prox. 40 km/h (25 MPH).
19
(Y)
Ground
Battery power supply
Input
OFF
—
Battery voltage
22
(B/W)
Ground EQ2 Ground
—
ON
—
0 V
24
(B)
Ground EQ4 Ground
—
ON
—
0 V
27
(SB)
—
AV communication (H)
Input/
Output
—
—
—
28
(LG)
—
AV communication (L)
Input/
Output
—
—
—
29
(P)
Ground TEL ON
Output
ON
—
—
30
(Shield)
—
TEL voice signal shield
—
—
—
—
32
(G)
31
(R)
TEL voice signal
Input
ON
During voice guide output
with
switch
pressed.
Terminal
(Wire color)
Description
Condition
Reference value
(Approx.)
+
–
Signal name
Input/
Output
Ignition
switch
Operation
SKIA0177E
SKIA0177E
JSNIA0012GB
SKIB3609E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст