Nissan Versa Note. Instruction — part 804

TM-96

< SYSTEM DESCRIPTION >

[CVT: RE0F11A]

DIAGNOSIS SYSTEM (TCM)

LINE PRS

(MPa)

Displays the target oil pressure of the line pressure sole-
noid valve calculated from oil pressure processing of
gear shift control.

TRGT PRI PRESSURE

(MPa)

Displays the target oil pressure of the primary pressure
solenoid valve calculated from oil pressure processing of
gear shift control.

TRGT HC/RB PRESS

(MPa)

Displays the target oil pressure of the high clutch & re-
verse brake solenoid valve calculated from oil pressure
processing of gear shift control.

TRGT LB PRESSURE

(MPa)

Displays the target oil pressure of the low brake solenoid
valve calculated from oil pressure processing of gear
shift control.

ISOLT1

(A)

×

Displays the command current from TCM to the torque
converter clutch solenoid valve.

ISOLT2 (A)

×

Displays the command current from TCM to the line
pressure solenoid valve.

PRI SOLENOID

(A)

×

Displays the command current from TCM to the primary
pressure solenoid valve.

HC/RB SOLENOID

(A)

×

Displays the command current from TCM to the high
clutch& reverse brake solenoid valve.

L/B SOLENOID

(A)

×

Displays the command current from TCM to the low
brake solenoid valve.

SOLMON1

(A)

×

×

Monitors the command current from TCM to the torque
converter clutch solenoid valve and displays the moni-
tored value.

SOLMON2

(A)

×

×

Monitors the command current from TCM to the line
pressure solenoid valve and displays the monitored val-
ue.

PRI SOL MON

(A)

×

×

Monitors the command current from TCM to the primary
pressure solenoid valve and displays the monitored val-
ue.

HC/RB SOL MON

(A)

×

×

Monitors the command current from TCM to the high
clutch& reverse brake solenoid valve and displays the
monitored value.

L/B SOL MON

(A)

×

×

Monitors the current command from TCM to the low
brake solenoid valve and displays the monitored value.

D POSITION SW

(On/Off)

×

Displays the operation status of the transmission range
switch (D position).

N POSITION SW

(On/Off)

×

Displays the operation status of the transmission range
switch (N position).

R POSITION SW

(On/Off)

×

Displays the operation status of the transmission range
switch (R position).

P POSITION SW

(On/Off)

×

Displays the operation status of the transmission range
switch (P position).

BRAKESW

(On/Off)

×

×

Displays the reception status of the stop lamp switch sig-
nal received through CAN communication.

L POSITION SW

(On/Off)

×

Displays the operation status of the transmission range
switch (L position).

IDLE SW

(On/Off)

×

×

Displays the reception status of the closed throttle posi-
tion signal received through CAN communication.

SPORT MODE SW

(On/Off)

×

×

Displays the reception status of the overdrive control
switch signal received through CAN communication.

Monitored item

(Unit)

Monitor item selection

Remarks

MAIN SIG-

NALS

ECU IN-

PUT SIG-

NALS

DIAGNOSIS SYSTEM (TCM)

TM-97

< SYSTEM DESCRIPTION >

[CVT: RE0F11A]

C

E

F

G

H

I

J

K

L

M

A

B

TM

N

O

P

STRDWNSW

(On/Off)

×

• Displays the operation status of the paddle shifter

(down switch).

• It is displayed although not equipped.

STRUPSW

(On/Off)

×

• Displays the operation status of the paddle shifter (up

switch).

• It is displayed although not equipped.

DOWNLVR

(On/Off)

×

• Displays the operation status of the selector lever

(down switch).

• It is displayed although not equipped.

UPLVR

(On/Off)

×

• Displays the operation status of the selector lever (up

switch).

• It is displayed although not equipped.

NONMMODE

(On/Off)

×

• Displays if the selector lever position is not at the man-

ual shift gate.

• It is displayed although not equipped.

MMODE

(On/Off)

×

• Displays if the selector lever position is at the instruction

shift gate.

• It is displayed although not equipped.

INDLRNG

(On/Off)

Displays the transmission status of the shift position (L
position) signal transmitted through CAN communica-
tion.

INDDRNG

(On/Off)

Displays the transmission status of the shift position (D
position) signal transmitted through CAN communica-
tion.

INGNRNG

(On/Off)

Displays the transmission status of the shift position (N
position) signal transmitted through CAN communica-
tion.

INGRRNG

(On/Off)

Displays the transmission status of the shift position (R
position) signal transmitted through CAN communica-
tion.

INGPRNG

(On/Off)

Displays the transmission status of the shift position (P
position) signal transmitted through CAN communica-
tion.

CVT LAMP

(On/Off)

Displays the transmission status of the OD OFF indicator
lamp signal transmitted through CAN communication.

SPORT MODE IND

(On/Off)

Displays the transmission status of the OD OFF indicator
lamp signal transmitted through CAN communication.

MMODE IND

(On/Off)

• Displays the transmission status of the instruction mode

signal transmitted through CAN communication.

• It is displayed although not equipped.

VDC ON

(On/Off)

×

• Displays the reception status of the VDC (ESP) oper-

ation signal received through CAN communication.

• It is displayed although not equipped.

TCS ON

(On/Off)

×

• Displays the reception status of the TCS operation sig-

nal received through CAN communication.

• It is displayed although not equipped.

ABS FAIL SIGNAL

(On/Off)

×

Displays the reception status of the ABS malfunction sig-
nal received through CAN communication.

ABS ON

(On/Off)

×

Displays the reception status of the ABS operation signal
received through CAN communication.

4WD FAIL SIGNAL

(On/Off)

×

• Displays the reception status of the 4WD malfunction

signal received through CAN communication.

• It is displayed although not equipped.

Monitored item

(Unit)

Monitor item selection

Remarks

MAIN SIG-

NALS

ECU IN-

PUT SIG-

NALS

TM-98

< SYSTEM DESCRIPTION >

[CVT: RE0F11A]

DIAGNOSIS SYSTEM (TCM)

WORK SUPPORT

*: “Clutch point learning” can be selected, but do not use it.

Engine brake adjustment

Check the degradation level of the CVT fluid.

4WD OPERATION SIG

(On/Off)

×

• Displays the reception status of the 4WD operation

signal received through CAN communication.

• It is displayed although not equipped.

4WD-TCS SIGNAL

(On/Off)

×

• Displays the reception status of the engine torque

down request signal received through CAN communi-
cation.

• It is displayed although not equipped.

RANGE

×

Displays the gear position recognized by TCM.

M GEAR POS

×

Display the target gear of instruction mode

G SEN SLOPE

(%)

Displays the gradient angle calculated from the G sensor
signal voltage.

ENGBRKLVL

(On/Off)

Displays the setting of “ENGINE BRAKE ADJ” in “Work
Support”.

PVIGN VOLT

(V)

×

Displays the backup voltage of TCM.

TRGT AUX GR RATIO

Displays the target gear ratio of the auxiliary gearbox cal-
culated from processing of gear shift control.

G SEN CALIBRATION

(YET/DONE)

Displays the status of “G SENSOR CALIBRATION” in
“Work Support”.

N IDLE STATUS

(On/Off)

Displays idle neutral status.

CVT-B

• Displays CVT fluid temperature count.
• This monitor item does not use.

CVT-A

• Displays CVT fluid temperature count.
• This monitor item does not use.

Monitored item

(Unit)

Monitor item selection

Remarks

MAIN SIG-

NALS

ECU IN-

PUT SIG-

NALS

Item name

Description

ENGINE BRAKE ADJ.

Although there is no malfunction on the transaxle and the CVT system, if a customer
make a complaint like “I do not feel comfortable with automatic operation of the engine
brake on downhill”, the engine brake may be cancelled with “engine brake adjust-
ment”.

CONFORM CVTF DETERIORTN

Check the degradation level of the CVT fluid under severe conditions.

G SENSOR CALIBRATION

Compensate the G sensor.

ERASE CALIBRATION DATA

Erase the calibration data memorized by TCM.

ERASE LEARNING VALUE

Erase the learning value memorized by TCM.

ERASE MEMORY DATA

Perform “erasing of the calibration data” and “erasing of the learned value” at the same
time.

CLUTCH POINT LEARNING*

Allow learning of the clutch engagement point of the auxiliary gearbox for TCM.

ENGINE BRAKE LEVEL
ON

: Turn ON the engine brake control.

OFF

: Turn OFF the engine brake control.

CVTF degradation level data

DIAGNOSIS SYSTEM (TCM)

TM-99

< SYSTEM DESCRIPTION >

[CVT: RE0F11A]

C

E

F

G

H

I

J

K

L

M

A

B

TM

N

O

P

210,000 or more

: Replacement of the CVT fluid is required.

Less than 210,000

: Replacement of the CVT fluid is not required.