Nissan Almera Tino V10. Instruction — part 772
SKIA1397E
“SET AVERAGE SPEED FOR ESTIMATED JOURNEY
TIME” MODE
NLEL0593S17
I
Set the average vehicle speed to calibrate the estimated jour-
ney time for the destination.
I
Set three items; “Freeway”, “Main Roads”, and “Ordinary
Roads”.
SKIA0555E
“GPS INFORMATION” MODE
NLEL0593S18
I
Latitude, longitude, altitude, astrometric state, and satellite
location are displayed as GPS information.
NOTE:
Altitude is displayed only in three-dimensional status.
SKIA0559E
“TRACKING” MODE
NLEL0593S19
I
To leave no trail on the map, select “Off”.
I
To leave a trail in the map, select “On”.
NOTE:
When a trail display is turned OFF, trail data is erased from the
memory.
SKIA1395E
“ADJUST CURRENT LOCATION” MODE
NLEL0593S20
1.
Select an icon “right” or “left” to calibrate the heading direction.
(Arrow marks will rotate corresponding to the calibration key.)
SKIA1396E
2.
Select “Set”. Then the vehicle mark will be matched to the
arrow mark.
NAVIGATION SYSTEM
System Description (Cont’d)
EL-384
SKIA1400E
GUIDE VOLUME SETTING
NLEL0593S21
Description
NLEL0593S2101
Following voice guidance setting can be changed.
Activation/Deactivation Setting
NLEL0593S2102
I
The voice prompt can be turned on/off by pressing the “Guid-
ance Volume” button.
Voice Volume Setting
NLEL0593S2103
I
Volume of the voice can be controlled by bending the joystick
to left/right.
NATS NAVI LINK
NLEL0593S22
Description
NLEL0593S2201
The link with the NATS IMMU implies that the AV and NAVI control
unit can basically only be operated if connected to the matching
NATS IMMU to which the AV and NAVI control unit was initially fit-
ted on the production line.
The Navigation system does not operate because it is judged that
the code collation with NATS IMMU is illegal when the control unit
of other cars is installed.
Precautions for AV and NAVI Control Unit
Replacement
NLEL0594
I
When replacing the AV and NAVI control unit, eject the map
DVD-ROM before disconnecting the battery.
I
The AV and NAVI control unit has the following information
stored in its memory. Record the memory contents before
replacing the control unit, and input them in the new unit as
necessary.
<RADIO>
I
Preset frequency
I
Area for indicating station, selection of overlapped sta-
tions
<CD>
I
Program status
<Sound quality>
I
Volume balance memory set values
I
Equalizer memory set values
<Image quality>
I
Brightness of light when ON/OFF
I
Dimming switching
I
Display color switching
GI
MA
EM
LC
EC
FE
CL
MT
AT
AX
SU
BR
ST
RS
BT
HA
SC
IDX
NAVIGATION SYSTEM
System Description (Cont’d)
EL-385
<Navigation mode>
I
Latest status (map screen/bird view
T
, reduced scale, rota-
tion angle of map screen, route guide ON/OFF, track
ON/OFF, etc.)
I
Current position
I
Destination, passing point 1 - 5
I
Registered places, their names, etc.
NOTE:
Only removing the battery does not erase the memory.
Component Parts Location
For details, refer to “ELECTRICAL UNIT LOCATION” (EL-596) and
“HARNESS LAYOUT” (EL-600).
Location of Antenna
NLEL0596
Refer to EL-212, “Location of Antenna”.
NAVIGATION SYSTEM
Precautions for AV and NAVI Control Unit Replacement (Cont’d)
EL-386
Schematic
NLEL0597
YEL021E
GI
MA
EM
LC
EC
FE
CL
MT
AT
AX
SU
BR
ST
RS
BT
HA
SC
IDX
NAVIGATION SYSTEM
Schematic
EL-387
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст