Nissan Almera Tino V10. Instruction — part 234
ATC-132
REFRIGERANT LINES
YD22DDTI ENGINE MODELS
RJIA2341E
REFRIGERANT LINES
ATC-133
C
D
E
F
G
H
I
K
L
M
A
B
ATC
Compressor
EJS0031C
REMOVAL
With QG Engine
With YD Engine
1.
Use refrigerant collecting equipment (for HFC-134a) to discharge refrigerant.
2.
Disconnect the compressor connector.
3.
Remove the engine under cover (right side).
4.
Remove the compressor-alternator belt.
Refer to
EM-15, "Removal and Installation"
(QG engine),
EM-118, "Removal and Installation"
(YD
engine).
RJIA0833E
RJIA0834E
ATC-134
REFRIGERANT LINES
5.
Remove the mounting nuts (bolts) from the high-pressure flexi-
ble hose and low-pressure flexible hose.
CAUTION:
Cap or wrap the joint of the pipe with suitable material such
as vinyl tape to avoid the entry of air.
6.
Remove the mounting bolts from compressor.
7.
Remove the compressor from the lower side of the vehicle.
INSTALLATION
CAUTION:
●
Replace the O-ring of the low-pressure flexible hose and
high-pressure flexible hose with a new one, then apply
compressor oil to it when installing it.
●
When pouring refrigerant, check for leaks.
RJIA1729E
RJIA1730E
RJIA0837E
Compressor mounting bolt (QG engine)
Tightening torque
: 50 - 60 N·m (5.1 - 6.9 kg-m, 37 - 49
ft-lb)
Compressor mounting bolt (YD engine)
Tightening torque
: 60 - 69 N·m (6.1 - 7.1 kg-m, 45 - 51
ft-lb)
Compressor bracket mounting bolt (QG engine)
Tightening torque
: 34 - 46 N·m (3.4 - 4.7 kg-m, 25 - 33
ft-lb)
Compressor bracket mounting bolt (YD engine)
Tightening torque
: 57 - 65 N·m (5.8 - 6.7 kg-m, 42 - 48
ft-lb)
Nut (bolt) mounting the high-pressure flexible hose
Tightening torque
: 7.8 - 19.6 N·m (0.8 - 2.0 kg-m, 69 -
173 in-lb)
RJIA0838E
REFRIGERANT LINES
ATC-135
C
D
E
F
G
H
I
K
L
M
A
B
ATC
Compressor Clutch
EJS0031D
REMOVAL
Overhaul
1.
When removing center bolt, hold clutch disc with wrench.
2.
Remove the clutch disc using the clutch disc puller.
3.
Remove the snap ring using external snap ring pliers.
Nut (bolt) mounting the low-pressure flexible hose
Tightening torque
: 7.8 - 19.6 N·m (0.8 - 2.0 kg-m, 69 -
173 in-lb)
RHA136EB
RHA399F
RHA124F
RHA138E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст