Nissan Almera Tino V10. Instruction — part 138
AT-276
[EXC.F/EURO-OBD]
TROUBLE DIAGNOSIS — BASIC INSPECTION
14. Touch “DISPLAY”.
15. Touch “PRINT”.
16. Check the monitor data printed out.
17. Continue cruise test part 2 and 3.
Without CONSULT-II
●
Throttle position sensor can be checked by voltage across termi-
nals 41 and 42 of TCM.
SAT975J
SCIA0710E
TROUBLE DIAGNOSIS — BASIC INSPECTION
AT-277
[EXC.F/EURO-OBD]
D
E
F
G
H
I
J
K
L
M
A
B
AT
Cruise Test — Part 1
1.
CHECK STARTING GEAR (D
1
) POSITION
1.
Drive vehicle for approx. 10 minutes to warm engine oil and ATF up to operating
temperature.
2.
Park vehicle on flat surface.
3.
Set overdrive control switch to “ON” position.
4.
Move selector lever to “P” position.
5.
Start engine.
6.
Move selector lever to “D” position.
7.
Accelerate vehicle by constantly depressing accelerator pedal
halfway.
8.
Does vehicle start from D
1
?
Read gear position.
Yes or No
Yes
>> GO TO 2
No
>>
●
GO TO
AT-321, "8. Vehicle Cannot Be Started From
.
●
Continue ROAD TEST. Refer to
.
ATF operating temperature: 50 - 80
°
C (122 - 176
°
F)
SAT774B
SAT775B
SAT495G
AT-278
[EXC.F/EURO-OBD]
TROUBLE DIAGNOSIS — BASIC INSPECTION
2.
CHECK SHIFT UP (D
1
TO D
2
)
Does A/T shift from D
1
to D
2
at the specified speed?
Read gear position, throttle opening and vehicle speed.
Yes or No
Yes
>> GO TO 3
No
>>
●
GO TO
AT-324, "9. A/T Does Not Shift: D
.
●
Continue ROAD TEST. Refer to
.
3.
CHECK SHIFT UP (D
2
TO D
3
)
Does A/T shift from D
2
to D
3
at the specified speed?
Read gear position, throttle position and vehicle speed.
Yes or No
Yes
>> GO TO 4
No
>>
●
GO TO
AT-326, "10. A/T Does Not Shift: D
.
●
Continue ROAD TEST. Refer to
.
4.
CHECK SHIFT UP (D
3
TO D
4
)
Does A/T shift from D
3
to D
4
at the specified speed?
Read gear position, throttle position and vehicle speed.
Yes or No
Yes
>> GO TO 5
No
>>
●
GO TO
AT-328, "11. A/T Does Not Shift: D
.
●
Continue ROAD TEST. Refer to
.
Specified speed when shifting from D
1
to D
2
:
Refer to
.
SAT954I
Specified speed when shifting from D
2
to D
3
:
Refer to
.
SAT955I
Specified speed when shifting from D
3
to D
4
:
Refer to
.
SAT956I
TROUBLE DIAGNOSIS — BASIC INSPECTION
AT-279
[EXC.F/EURO-OBD]
D
E
F
G
H
I
J
K
L
M
A
B
AT
5.
CHECK LOCK-UP (D
4
TO D
4
L/U)
Does A/T perform lock-up at the specified speed?
Read vehicle speed, throttle position when lock-up duty becomes 94%.
Yes or No
Yes
>> GO TO 6
No
>>
●
GO TO
AT-330, "12. A/T Does Not Perform Lock-up"
.
●
Continue ROAD TEST. Refer to
.
6.
CHECK HOLD LOCK-UP
Does A/T hold lock-up condition for more than 30 seconds?
Yes or No
Yes
>> GO TO 7
No
>>
●
GO TO
AT-330, "13. A/T Does Not Hold Lock-up Condition"
.
●
Continue ROAD TEST. Refer to
.
7.
CHECK SHIFT DOWN (D
4
L/U TO D
4
)
1.
Release accelerator pedal.
2.
Is lock-up released when accelerator pedal is released?
Yes or No
Yes
>> GO TO 8
No
>>
●
GO TO
AT-332, "14. Lock-up Is Not Released"
.
●
Continue ROAD TEST. Refer to
.
8.
CHECK SHIFT DOWN (D
4
TO D
3
)
1.
Decelerate vehicle by applying foot brake lightly.
2.
Does engine speed return to idle smoothly when A/T is shifted from D
4
to D
3
?
Read gear position and engine speed.
Yes or No
Yes
>> 1. Stop vehicle.
2. GO TO
AT-280, "Cruise Test — Part 2"
.
No
>>
●
GO TO
AT-332, "15. Engine Speed Does Not Return
.
●
Continue ROAD TEST. Refer to
.
Specified speed when lock-up occurs:
Refer to
.
SAT957I
SAT958I
SAT959I
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст