Nissan Almera Tino V10. Instruction — part 81
AT-48
[EURO-OBD]
ON BOARD DIAGNOSTIC SYSTEM DESCRIPTION
7.
Touch select item menu (1ST, 2ND, etc.).
8.
Touch “START”.
9.
Perform driving test according to “DTC CONFIRMATION PRO-
CEDURE” in “TROUBLE DIAGNOSIS FOR DTC”.
●
When testing conditions are satisfied, CONSULT-II screen
changes from “OUT OF CONDITION” to “TESTING”.
10. Stop vehicle. If “NG” appears on the screen, malfunction may
exist. Go to “DIAGNOSTIC PROCEDURE”.
SAT018K
SAT589J
SAT019K
SAT591J
SAT592J
ON BOARD DIAGNOSTIC SYSTEM DESCRIPTION
AT-49
[EURO-OBD]
D
E
F
G
H
I
J
K
L
M
A
B
AT
11. Perform test drive to check gear shift feeling in accordance with
instructions displayed.
12. Touch “YES” or “NO”.
13. CONSULT-II procedure ended.
If “NG” appears on the screen, a malfunction may exist. Go to
“DIAGNOSTIC PROCEDURE”.
SAT593J
SAT594J
SAT595J
SAT596J
SAT593J
AT-50
[EURO-OBD]
ON BOARD DIAGNOSTIC SYSTEM DESCRIPTION
DTC WORK SUPPORT MODE
Diagnostic Procedure Without CONSULT-II
ECS00970
EURO-OBD SELF-DIAGNOSTIC PROCEDURE (WITH GST)
Refer to
EC-127, "Generic Scan Tool (GST) Function"
.
EURO-OBD SELF-DIAGNOSTIC PROCEDURE (NO TOOLS)
Refer to
EC-70, "Malfunction Indicator (MI)"
.
DTC work support item
Description
Check items (Possible cause)
1ST GR FNCTN P0731
Following items for “A/T 1st gear function (P0731)” can be con-
firmed.
●
Self-diagnosis status (whether the diagnosis is being conducted
or not)
●
Self-diagnosis result (OK or NG)
●
Shift solenoid valve A
●
Shift solenoid valve B
●
Each clutch
●
Hydraulic control circuit
2ND GR FNCTN P0732
Following items for “A/T 2nd gear function (P0732)” can be con-
firmed.
●
Self-diagnosis status (whether the diagnosis is being conducted
or not)
●
Self-diagnosis result (OK or NG)
●
Shift solenoid valve B
●
Each clutch
●
Hydraulic control circuit
3RD GR FNCTN P0733
Following items for “A/T 3rd gear function (P0733)” can be con-
firmed.
●
Self-diagnosis status (whether the diagnosis is being conducted
or not)
●
Self-diagnosis result (OK or NG)
●
Shift solenoid valve A
●
Each clutch
●
Hydraulic control circuit
4TH GR FNCTN P0734
Following items for “A/T 4th gear function (P0734)” can be con-
firmed.
●
Self-diagnosis status (whether the diagnosis is being conducted
or not)
●
Self-diagnosis result (OK or NG)
●
Shift solenoid valve A
●
Shift solenoid valve B
●
Overrun clutch solenoid valve
●
Line pressure solenoid valve
●
Each clutch
●
Hydraulic control circuit
ON BOARD DIAGNOSTIC SYSTEM DESCRIPTION
AT-51
[EURO-OBD]
D
E
F
G
H
I
J
K
L
M
A
B
AT
TCM SELF-DIAGNOSTIC PROCEDURE (NO TOOLS)
1.
CHECK O/D OFF INDICATOR LAMP
1.
Start engine and warm it up to normal operating temperature.
2.
Turn ignition switch to “OFF” position.
Wait 5 seconds.
3.
Turn ignition switch to “ACC” position.
4.
Set overdrive control switch to “ON” position.
5.
Move selector lever to “P” position.
6.
Turn ignition switch to “ON” position. (Do not start engine.)
7.
Does O/D OFF indicator lamp come on for about 2 seconds?
Yes or No
Yes
>> GO TO 2
No
>> Go to
AT-213, "1. O/D OFF Indicator Lamp Does Not
.
2.
JUDGEMENT PROCEDURE STEP 1
1.
Turn ignition switch to “OFF” position.
2.
Turn ignition switch to “ACC” position.
3.
Move selector lever to “D” position.
4.
Set overdrive control switch to “OFF” position.
5.
Turn ignition switch to “ON” position. (Do not start engine.)
–
Wait more than 2 seconds after turning ignition switch “ON”.
>> GO TO 3
SAT774B
MCIA0066E
SAT653E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст